Assessment of stiffness and strength of 4 different implants available for equine fracture treatment: a study on a 20 degrees oblique long-bone fracture model using a bone substitute

OBJECTIVE: To compare the mechanical properties of 4 stabilization methods for equine long-bone fractures: dynamic compression plate (DCP), limited contact-DCPlate (LC-DCP), locking compression plate (LCP), and the clamp-rod internal fixator (CRIF--formerly VetFix). STUDY DESIGN: In vitro mechanical study. SAMPLE POPULATION: Bone substitute material (24 tubes) was cut at 20 degrees to the long axis of the tube to simulate an oblique mid-shaft fracture. METHODS: Tubes were divided into 4 groups (n=6) and double plated in an orthogonal configuration, with 1 screw of 1 implant being inserted in lag fashion through the "fracture". Thus, the groups were: (1) 2 DCP implants (4.5, broad, 10 holes); (2) 2 LC-DCP implants (5.5, broad, 10 holes); (3) 2 LCP implants (4.5/5.0, broad, 10 holes) and 4 head locking screws/plate; and (4) 2 CRIF (4.5/5.0) and 10 clamps in alternating position left and right of the rod. All constructs were tested in 4-point bending with a quasi-static load until failure. The implant with the interfragmentary screw was always positioned on the tension side of the construct. Force, displacement, and angular displacement at the "fracture" line were determined. Construct stiffness under low and high loads, yield strength, ultimate strength, and maximum angular displacement were determined. RESULTS: None of the implants failed; the strength of the bone substitute was the limiting factor. At low loads, no differences in stiffness were found among groups, but LCP constructs were stiffer than other constructs under high loads (P=.004). Ultimate strength was lowest in the LCP group (P=.01), whereas yield strength was highest for LCP constructs (409 N m, P=.004). CRIF had the lowest yield strength (117 N m, P=.004); no differences in yield strength (250 N m) were found between DCP and LC-DCP constructs. Differences were found for maximum angular displacement at the "fracture" line, between groups: LPC相似文献   

Closed system anaesthesia in dogs using liquid sevoflurane injection; evaluation of the square-root-of-time model and the influence of CO2 absorbent

Objective To determine whether predictable alveolar concentrations of sevoflurane are reliably produced in dogs when liquid sevoflurane is injected into closed circuit breathing systems, as calculated by Lowe's square‐root‐of‐time anaesthetic uptake model, and to confirm the validity of the model using soda lime and calcium hydroxide lime. Study design Prospective clinical study. Animals Eleven healthy dogs with a mean body mass of 34 ± 9 kg scheduled for pelvic limb orthopaedic surgery. Materials and methods Following pre‐anaesthetic medication, anaesthesia was induced with propofol and maintained with sevoflurane in a closed circle system. Epidural anaesthesia was performed with morphine and bupivacaine. Liquid sevoflurane was injected into the circuit by syringe, using dosages and time intervals derived from Lowe's square‐root‐of‐time anaesthetic uptake model. The target alveolar concentration chosen was 1.1 × MAC (2.6% end‐tidal sevoflurane). Either soda lime (group S; n = 6) or calcium hydroxide lime (Amsorb; group A; n = 5) were used for CO₂ absorption. Sevoflurane concentration and the respiratory gas composition were measured with an infrared gas analyser. Results End‐tidal sevoflurane concentrations were close to the predicted value of 2.6% at 9 minutes (2.53 ± 0.1% group S; 2.60 ± 0.26% group A) and 16 minutes (2.55 ± 0.30 group S; 2.52 ± 0.28% group A) but declined thereafter to reach 50% (group S) and 64% (group A) of the predicted value at 121 minutes. There was a constant trend towards higher end‐tidal sevoflurane concentrations in group A but the difference was not statistically significant. Conclusions The square‐root‐of‐time model leads to significantly lower alveolar concentrations than expected, suggesting that the rate of sevoflurane uptake in dogs declines less rapidly than predicted. The use of Amsorb tends to reduce the deviation from predicted concentrations. Clinical relevance The model used in this study provided only an approximate guide to the volume of liquid sevoflurane required. Consequently, the definitive dose schedule must be based on measured anaesthetic concentrations and clinical monitoring.     

Murine xenograft model demonstrates significant radio-sensitising effect of liposomal doxorubicin in a combination therapy for Feline Injection Site Sarcoma

Therapy of cats suffering from feline injection site sarcomas (FISS) is still a challenging problem, as the recurrence rate after surgery is up to 70%. Four FISS-derived primary tumour cell lines and corresponding xenograft tumour mouse models were established to evaluate the efficacy of a concomitant chemo-/radiation therapy with doxorubicin. In vitro, strongly depending upon the timing of administration, pre-treatment with 0.25 µmol doxorubicin resulted in a significant enhancement of radiation-induced (3.5 Gy) tumour cell death. This result was confirmed in vivo, where only the combined chemo-/radiation therapy resulted in a significant reduction in tumour growth compared to the respective mono-therapies with either doxorubicin or radiation. These results support the use of the concomitant chemo-/radiation therapy for adjuvant treatment of FISS, particularly in advanced or recurrent disease where surgery alone is no longer feasible.     

放牧对西藏高寒嵩草草甸地上生物量空间分布的影响

以西藏自治区工布江达县的高寒嵩草（Kobresia）草甸为研究对象,利用地上生物量测定法对草地群落进行实地调查,并结合γ分布模型,从空间异质性角度来探索放牧对西藏高寒草甸地上生物量及其空间分布格局的影响,以期为高寒牧区退化草地的恢复及生产力的提高提供理论指导。结果表明：未放牧区（N）、适度放牧区（M）和重度放牧区（H）植物种地上生物量的空间分布与γ模型均具有很好的吻合性;样方内的平均生物量随着放牧强度的增大而减少,且适度放牧、重度放牧与未放牧区生物量之间均差异极显著（P<0.01）;群落的空间异质性表现为N>H>M,且草地植物种的生物量与其空间异质性负相关。因此在草地的管理与利用中,应有效控制植物群落的空间异质性来提高草地生产力,实现草畜平衡。     

基于体外细胞模型的霉菌毒素毒性评价

霉菌毒素是由多种真菌产生的次级代谢产物,广泛存在于食品和饲料中。霉菌毒素污染的粮食和饲料会给畜牧业生产和畜产品质量安全带来极大隐患。研究霉菌毒素致毒机理,为今后研究其对动物及人的影响开展更深入更全面的研究提供理论依据。细胞模型作为一种常用的体外试验方法广泛用于毒理学研究中。本文简述了黄曲霉毒素B_1(AFB_1)、赭曲霉毒素A(OTA)、脱氧雪腐镰刀菌烯醇(DON)、玉米赤霉烯酮(ZEA)和展青霉素(PAT)的一般特性,并综述了利用细胞模型进行AFB_1、OTA、DON、ZEA和PAT毒性、联合毒性及致毒机理研究的进展。     

乳牛体型性状线性评定数学模型的指导和应用

本文说明了乳牛体型性状线性评定的常规方法,在此基础上推导出了该评定方法的数学模型。该模型的提出,极大地简化了常规评定方法的繁琐计算,值得在乳牛业生产实践中推广使用。     

Day-to-Day variation of the urine protein: creatinine ratio in female dogs with stable glomerular proteinuria caused by X-linked hereditary nephropathy

BACKGROUND: Interpretation of serial urine protein:creatinine (UPC) values is confounded by a lack of data regarding random biologic variation of UPC values in dogs with stable glomerular proteinuria. HYPOTHESIS: That there is minimal day-to-day variability in the UPC of dogs with unchanging proteinuria and the number of measurements needed to reliably estimate UPC varies with the magnitude of proteinuria. ANIMALS: Forty-eight heterozygous (carrier) female dogs with X-linked hereditary nephropathy (XLHN) causing stable proteinuria. METHODS: Urine samples were obtained daily by cystocentesis for 3 consecutive days on 183 occasions (549 samples). The UPC was measured for each sample with a single dry-film chemistry auto-analyzer. Data were analyzed retrospectively by a power of the mean model because the variance of UPC values within the 3-day evaluation periods increased as the magnitude of proteinuria increased. RESULTS: To demonstrate a significant difference (P < .05) between serial values in these proteinuric dogs, the UPC must change by at least 35% at high UPC values (near 12) and 80% at low UPC values (near 0.5). One measurement is adequate to reliably estimate the UPC when UPC <4, but 2-5 determinations are necessary at higher UPC values. CONCLUSIONS AND CLINICAL IMPORTANCE: These guidelines for interpretation of serial UPC values in female dogs with XLHN may also be helpful for interpretation of UPC values in dogs with other glomerulopathies.     

Genetic parameters for abnormal sucking traits in Austrian Fleckvieh heifers

Cross‐sucking and intersucking are considered abnormal behaviours in cattle and constitute a common problem in dairy farming. Cross‐sucking in calves is defined as sucking any body parts of another calf whereas intersucking in heifers and cows is defined as sucking the udder or udder area. The aim of this study was to determine the genetic variability for abnormal sucking behaviour by estimating genetic parameters and examining individual differences between sires with large progeny groups. By means of a questionnaire, cattle breeders in the federal state Lower Austria were requested to identify all currently kept animals which are known of either inter‐ or cross‐sucking (both defined as the same binary trait ‘sucking’ with 0 and 1 referring to the absence and presence of this abnormal behaviour) or allowing sucking (also treated as a binary trait, scored as 1 if an animal was known of allowing herd mates to suck and 0 otherwise). Records of 1222 farms and 13 332 dual purpose Simmental females aged between 21 and 700 days were investigated applying a linear animal model with fixed herd × year × season and random genetic animal effect and a threshold sire model with the herd × year × season effect being treated as random. In total, 8.6% and 4.1% of all calves/heifers were observed sucking and allowing sucking, respectively. Heritabilities of 0.040 ± 0.014 and 0.007 ± 0.006 (linear animal model) and 0.116 ± 0.041 and 0.026 ± 0.024 (threshold model) were found for the traits sucking and allowing sucking, respectively. Breeding values were estimated applying the same models for the trait sucking. Taking all 254 sires into account, the Pearson and Spearman correlation coefficients between breeding values estimated by linear animal and sire threshold model were 0.86 and 0.80. Thus, little difference was observed between the two methods.     

牧草-鹅-鲜食葡萄循环生态种养模式的构建与实践

为了提高葡萄园资源利用率和综合效益,构建了牧草-鹅-鲜食葡萄循环生态种养体系。实践表明,在设施葡萄园推广套种牧草养鹅、鹅粪生产有机肥料、有机肥料种植葡萄和牧草等高效配套技术,取得了良好的经济效益、生态效益和社会效益。实施牧草-鹅-鲜食葡萄循环生态种养是江苏沿海地区发展现代农业的一种有效生产模式。     

临界氮浓度稀释模型在牧草种子生产中的应用前景

氮素是影响牧草种子产量的关键因素,氮素对于植株分蘖、干物质生产、花序形成、产量组分动态变化等均具有影响.文章主要从临界氮浓度稀释模型的概念、构建方法、研究现状、应用等方面进行了综述,提出临界氮浓度稀释模型在实际生产中应用时存在的问题,并对其在牧草种子生产中的应用前景进行了展望.