浅谈工业锅炉给水除氧

阐述了工业锅炉给水除氧的原理,并对常用的热力除氧、真空除氧、解吸除氧等技术进行了分析。     

从能量原理推导J积分的表达式

本文用最小位能原理和最小余能原理，推导出了弹塑性断裂力学中的Ｊ积分表达式．并由此而得到非线性弹性材料和弹塑性材料的平面裂纹尖端发生断裂前，位能与众能同时达到最小值．这一推导，为能量原理在断裂力学中的应用提出了一个新的见解．     

基于混合像元分解方法的康保县植被覆盖度估测

以康保县为研究区,使用Landsat8 OLI数据,结合134个野外样地调查数据,通过像元二分法、完全约束最小二乘法和随机森林三种方法来进行混合像元的分解,探讨混合像元分解方法对提取地表植被覆盖度的可行性。结果显示:基于随机森林的混合像元分解方法结果最优,F为0.664,RMSE为0.127;三种方法都能较为精确地估测出康保县的植被覆盖情况,且与实测数据较为拟合,因此采用混合像元分解的方法进行植被覆盖度估测是完全可行的。     

A fine-scale model for area-based predictions of tree-size-related attributes derived from LiDAR canopy heights

Abstract

We propose a conceptual (generic) allometric (power function) relationship between tree-size-related forest inventory attributes (e.g. biomass, volume, basal area, quadratic mean diameter, Lorey's height) and canopy height (CH) as estimated from first-return airborne light detection and ranging (LiDAR) pulses. A data-driven estimation of the parameters in the power function is complicated, so we recommend an alternative approximation obtained via a linearisation step. Only two predictors appear in the approximation: the mean CH and the variance of CHs within the spatial domain supported by field data. The proposed model eliminates an otherwise complex search for the best predictors amongst a large number of candidate LiDAR metrics. It also facilitates model comparisons and interpretation. Fit statistics estimated for volume, basal area, quadratic mean diameter and Lorey's height – using three separate datasets from Norway – were compelling.     

硬岩抗剪强度参数的最优化确定法

为了减小岩工程分析计算的工作量和节约研究经费,须利用有限的室内实验样本的测定值,通过对有限实验样本数据的回归分析整理,确定岩石抗剪强度参数c、φ,进而估计岩体的抗剪强度c、φ.由于试验方法、试验条件等有一定局限性,因而,岩石力学参数的试验结果具有一定的不确定性.其不确定性包含随机性和模糊性.而用传统的数理统计方法处理岩石样本值,显然是不合适的,只有通过寻求最优的数学回归分析方法,来处理相关试验结果.笔者通过对硬岩变角度剪切实验和常规三轴压缩实验的数据回归分析,得到利用最小二乘法的抛物线回归分析结果和随机-模糊回归分析结果比较符合.因而,为了优化计算结果而又避免繁琐的计算,通常可以采用最小二乘法的抛物线回归分析计算代替随机-模糊回归分析相关结果.     

分宜县天工广场铺装的导向性功能设计

指出了城市广场铺装设计中系统的完成导向性功能在城市广场设计中对于其文化性、参与性的表达具有重要意义,通过对江西省分宜县天工广场铺装设计的研究,分析了广场铺装的导向性功能,探讨了铺装导向性功能表达形式,为城市广场的铺装设计提供参考。     

林分生长模型建立方法

在林分生长模型建立中,通过分析变量间的显著影响选择变量．研究模型的评价与检验指标等方法,为建立优选模型提供参考．文中对最小二乘拟合模型中的异方差和多重共线性问题进行了分析,提出了加权最小二乘法、逐步回归剔除法等处理方法．     

森林资源动态变化预测模型

本文给出了不等间隔时序数列的CM(1,1)模型,并对广西融水县森林资源动态变化进行了预测。预测结果比较理想,模型精度97.2％,从而为森林资源部分数据更新提供了一个新方法。     

Optimization potential for perception-oriented appearance classification by simulated sawing of computed tomography-scanned logs of Norway spruce

Abstract

Wood, as a natural material, has favourable properties in both technical and aesthetic aspects. Due to its inherent variability, production of high-quality sawn timber demands adequate control of log conversion, which is feasible with computed tomography (CT) log scanning. Existing appearance grading rules for sawn timber might not fully reflect people's visual perception of wood surfaces, and therefore, an alternative, more perception-oriented appearance classification could be beneficial. An appearance classification of sawn timber based on partial least squares discriminant analysis (PLS-DA) of knot-pattern variables was developed and tested. Knot-pattern variables derived from images of board faces were used in training PLS-DA models against an initial classification of the board faces previously established by aid of cluster analysis. Virtual board faces obtained from simulated breakdown of 57 CT-scanned Norway spruce logs were graded according to the developed classification. Visual assessment of the grading results indicated that the classification was largely consistent with human perception of board appearance. An initial estimation of the potential to optimize log rotation, based on CT data, for the established appearance grades was derived from the simulations. Considerable potential to increase the yield of a desired appearance grade, compared to conventional log positioning, was observed.     

农田防护林主带间距离的确定——基于林带结构与风速降低的关系(英文)

本文通过对9条分布均匀、相对较窄的不同疏透度(透光疏透度,下同)(0.13～0.33)的树木林带和不同疏透度(0.00～0.80)风障组合的野外风速观测,确定了树木林带和风障的最适疏透度分别为0.25和0.13。基于林带结构(疏透度)与风速降低的关系,确定了林带主带间距离的主要参数,即,林带结构系数(δ)和以主害风为代表的小气候参数(Lrp)。另外,通过对林带树木的野外调查,应用树木解析技术确定林带成林高(H0)。因此,树木林带的主带间距可以通过林带结构系数、希望降低风速的比例和树木生长模型来确定。本文以杨树林带为例,具体确定了杨树林带的主带间距。该研究结果不仅适于树木林带的设计,同时适于其它生物材料或人工风障的设计。图4表5参40。