On farm observations to increase genetic gain in breeding schemes for village poultry production – A simulation study

To improve genetic gain of breeding programs for village poultry production, breeding schemes with observations obtained in village production systems using individual (VIO) and group recording (VGO) were examined under different levels of genotype-by-environment-interactions (GxE). GxE was modeled by varying the correlation between traits measured in the breeding station and village environments for bodyweight (r_{g_BW}) and egg production (r_{g_EP}). Relative and absolute genetic gains obtained from VIO and VGO were used for comparison between the schemes. Results showed that village observations significantly improved genetic gains compared to the scheme without birds tested in the village. The improvement was only slightly larger with individual observations than with group observations. Higher r_{g_BW} and r_{g_EP} led to lower relative genetic gain, but a higher absolute gain of VIO and VGO. It is recommended to apply a breeding scheme using group recording of village performance when strong GxE in breeding for village poultry is expected.     

基于仿人智能控制的长输管道新型退磁仪的智能化实现

对于年金的时间价值的研究,往往假定利率在整个期间内是固定不变的.但事实上,由于受到多种因素的影响,利率通常具有不确定性.因此,本文采用可逆MA(1)模型对随机利息力进行建模,在此基础上,研究了期末付虹式年金和期末付平顶虹式年金的时间价值问题,给出了上述两种形式年金现值的期望和方差的递推公式.通过数值仿真分析了相关参数对期末付虹式年金现值的期望值的影响,其结论对投资者的投资决策提供了参考依据.     

Reducing crude protein variability and maximizing savings when formulating corn-soybean meal-based feeds

Crude protein in corn and soybean meal have been documented to vary, and such inherent variability can result in under- or over-feeding of CP when feeds are formulated, leading to reduced bird growth, added input costs, and increased environmental pollution. The purpose of this study was to compare 2 grain-handling techniques and 2 feed formulation methods (linear vs. stochastic programming) to reduce CP variability in finished feeds and determine resulting costs or savings. The 2 grain-handling techniques were placing all the random batches of each delivered ingredient in to (1) a single bin (1-bin method) or (2) segregating above- and below-average samples into 2 bins (2-bin method). A fast way of estimating the composition of the ingredients is now available (near-infrared reflectance spectroscopy). Microsoft Excel workbooks were constructed to solve broiler starter feed formulation problems. Formulating feeds by linear and stochastic models based on the 2-bin method reduced CP variability by at least 50% compared with the 1-bin method. Formula cost was reduced by ˜20 cents per ton (averages of August 2012 United States ingredient prices) when the 2-bin method was used with the linear model. Formulating feed with a margin of safety increased formula cost by $3.40 per ton. Stochastic feed formulation increased formula cost to meet the specified CP level in feed at any probability of success, and formula cost was reduced substantially with the 2-bin method (up to $6.47 per ton). The magnitude of savings and reduced feed variability suggested that, regardless of the costs associated with building extra bins, the 2-bin method can be economically efficient in the long run. Therefore, it could be possible to split the batches of feed ingredients at a feed mill into above- or below-average bins before feed formulation to reduce CP variability and to maximize savings.     

应用Excel软件分析敌敌畏农药对两广二号家蚕的安全间隔期

应用Excel软件中的曲线方程分析判断敌敌畏农药对两广二号家蚕的安全间隔期。结果表明：敌敌畏1000倍液的安全间隔期是6d多，其数学模型为幂函数曲线方：y=88．0653x-1834本方法克服以往家蚕的农药安全期无数学模型可循或使用的BASIC方法陈旧繁杂的缺点，也避免英文统计软件SPSS难以在农村普及的不足，是一种计...     

E－凸集的几个基本性质

利用比较与分析的方法，由E-凸集的定义出发，研究了E-凸集的若干基本性质．所得结果丰富并深化了凸分析的基本内容，拓宽了广义凸性在优化理论及其应用中的研究范围．     

各向同性人造板材料弹性模量测量及其标准差评价

弹性模量是衡量人造板材料力学性能的重要指标,用标准差法对其进行综合评价尤为必要,对其实测及方差分析具有较好的应用价值。采用三点弯曲静力法和悬臂梁自由端振动法,测定各向同性HDF、三合板和OSB试材的静弹性模量和动弹性模量。在实测数据分析中,为反映总体弹性模量实测值数据集的离散程度及落在样本统计值某一区内的概率,还确定了其置信区间,评价了置信度。结果表明:各向同性人造板材料的静弹性模量和动弹性模量测试结果一致,其置信区间越大,置信水平越高。     

影响荷斯坦奶牛产犊间隔的因素及其研究进展

产犊间隔（calving internal,CI）又称胎间距,即两次产犊间的时间间隔,能够综合反映奶牛发情、配种、妊娠和产犊等繁殖性能,是衡量奶牛繁殖性能的一个重要指标,同时也是影响奶牛产奶量和产犊数量的重要因素,对奶牛养殖经济效益具有直接影响。最新研究显示,适宜产犊间隔与牛群泌乳能力相关,泌乳能力越高,适宜产犊间隔应越长。但是,即使中国规模化牛场产奶量已经有了大幅提升,中国大多数牧场还在追求更短的产犊间隔。为此,作者对影响荷斯坦奶牛产犊间隔的因素及其研究进展进行概述,并简要阐述了产犊间隔对牛场经济效益的影响,以期为中国荷斯坦奶牛养殖确定适宜产犊间隔提供一定的借鉴和理论依据。     

基于DPSA算法的“单库-单站”水资源优化调度方法研究

提出了单座水库与单座补水泵站水资源优化调度的非线性数学模型,模型以年内各时段的缺(弃)水量的平方最小为目标函数,各时段水库供水量和泵站引提水量为决策变量,各时段水库库容为状态变量,以年调节水库可供水量、泵站年引提水总量、水库与补水泵站的联合运行准则(泵站闲时补库、忙时供水)等为约束条件,并以南水北调东线一期江苏境内"骆马湖-皂河站"为实例,采用动态规划逐次逼近法进行求解。结果表明,相同供水保证率时,50%、75%、95%来水频率下泵站补水量、缺水量、弃水量比常规调度均有减少。     

动物脂肪沉积程序化及精氨酸的调控作用

脂肪的过度沉积常伴随着胰岛素抵抗、Ⅱ型糖尿病等代谢病症,既危害人类健康,带来经济负担,也会在农业生产中影响畜牧产品的质量。脂肪的沉积,始于胚胎期脂肪组织的发育,是一系列程序化作用的结果。脂肪沉积受多方因素影响,营养干预可以通过胚胎环境中的糖皮质激素浓度、线粒体功能、表观遗传、食欲中枢发育等方面影响胚胎脂肪沉积程序化。论文阐述了动物出生前后营养状况对脂肪沉积程序化的作用,对脂肪沉积的机制进行了初步探讨,并介绍了精氨酸营养在脂肪沉积中的应用。饮食中添加精氨酸为治疗脂肪过度沉积,提高畜牧生产水平,改善人类生活质量,开拓了新的思路。