螺旋输送与筛筒组合式分离装置性能试验

大中型谷物联合收割机分离装置存在体积庞大、振动强等问题,小型谷物联合收割机分离装置缺乏对断茎秆的处理能力且分离能力较弱。为此,提出了一种螺旋输送与筛筒组合式分离装置。通过室内试验,研究了搅龙转速、装置倾角和分离筛孔尺寸对分离性能的影响,得出了最优结构和运动参数组合,实现了籽粒、颖糠及茎秆在输送过程中的有效分离,为清选装置在谷物联合收割机上的应用提供了依据。     

土壤养分有效性测定及其方法

在提出土壤养分有效性测定概念的基础上 ,本文对各种土壤养分有效性的测定方法进行了总结 ,讨论了这些方法的测定机理、测定效果及近几年的进展。这些方法包括用于磷钾等元素测定的树脂法、用于氮测定的生物培养法和化学提取法、磷测定的氧化铁试纸法和氢氧化铁透析管法和钾的四苯硼钠法     

In-field calibration of a dielectric soil moisture meter designed for use in an access tube

Abstract. The in-field calibration of a dielectric probe to measure soil water content is described. The probe uses an access tube analogous to that of the neutron probe. The dielectric constant was measured at soil depths of 10, 20, 30, 40, 60 and 100 cm. Cores of soil were then taken from the face of pits dug 30 cm from the access tube and their soil water contents determined by oven drying. The dielectric constant values measured by the probe were calibrated against water contents from these cores. We found that sensor depth needed to be included to achieve a good calibration model that explained 72% of the variance. It is argued that depth needs to be included because of artefacts introduced during the installation of the access tube.     

三种辐照方式对黑松花粉萌发和花粉管生长的影响

研究了低能氮离子束、紫外线与γ射线辐照对黑松花粉萌发和花粉管生长的影响。结果表明,低能氮离子注入对黑松花粉的损伤效应与γ射线和紫外线照射的不同,主要表现在氮离子束剂量-萌发率效应曲线呈"马鞍型"和氮离子束注入诱发花粉管顶端肿胀,这说明低能离子束的作用机制可能与γ射线和紫外线的不同。认为花粉是研究离子注入生物学效应机制的理想模式系统。     

单叶省藤组培苗与实生苗的造林效果分析

通过在黄梁木和八宝树林分下设置组培丛芽苗与组培单芽苗、组培单芽苗与实生苗造林试验,对不同苗木的造林效果进行分析.研究结果表明:组培单芽苗的保存率、萌蘖数和萌蘖率总体上高于丛芽苗;丛芽苗造林后1.5 a的母茎长显著大于单芽苗,3~4 a时二者无显著差异,而造林后8 a单芽苗的母茎长超过丛芽苗,二者间存在显著差异;在造林后4 a内丛芽苗的藤丛总茎长明显大于单芽苗,造林后8 a丛芽苗的总茎长略优于单芽苗,但二者之间的差异不显著.组培单芽苗的保存率、萌蘖数和萌蘖率均高于实生苗;两者母茎长和藤丛总茎长在不同年龄时均无显著差异.     

池塘养殖加料车设计

针对目前池塘养殖中投饵机大部分加料都是依靠人力完成,劳动强度大,在陡峭斜岸上对投饵船进行加料困难的现状,设计一种无动力出料的节能定量加料车。加料车使用旋转下料阀进行定量下料,使用剪叉式升降平台调整加料高度。通过设计位于下料阀出料口的球形限位旋转连接件调整加料管的倾角实现无动力出料。基于圆柱凸轮设计新型伸缩加料管。加料车通过车体的移动、剪叉式升降平台的升降、加料管倾角和长度的调整实现定向、定距、定点的饲料添加。制作加料车样机,以投饵船和固定式投饵机为加料目标进行加料试验,试验结果表明加料车对不同规格饲料具有通用性,1.2 m的伸缩长度和1.5 m的升降高度能满足投饵船和固定式投饵机的加料需求,调整灵活,加料速度为6.2 kg/min。设计的加料车使用灵活,能代替人工给投饵船和固定式投饵机加料,减轻人工劳动强度,提高养殖过程的机械化水平,为进一步实现自动化和智能化打下基础。     

Bioactive Properties of Peptides and Polysaccharides Derived from Peanut Worms: A Review

Peanut worms (Sipunculids) are unsegmented marine worms that usually inhabit shallow waters. Peanut worms are good source of bioactive compounds including peptides and polysaccharides. Many recent studies have investigated the bioactive properties of peptides and polysaccharides derived from peanut worms in order to enhance their applications in food and pharmaceutical industries. The peptides and polysaccharides isolated from peanut worms have been reported to possess anti-hypertensive, anti-oxidant, immunomodulatory, anti-inflammatory, anti-cancer, anti-hypoxia and wound healing activities through the modulation of various molecular mechanisms. Most researchers used in vitro, cell culture and animal models for the determination of bioactivities of peanut worm derived compounds. However, studies in humans have not been performed considerably. Therefore, it is important to conduct more human studies for better utilization of marine bioactive compounds (peptides and polysaccharides) derived from peanut worms. This review mainly focuses on the bioactive properties of peptides and polysaccharides of peanut worms and their molecular mechanisms.     

稻麦两用螺旋舀种式排种器排种性能试验

设计了一种稻麦两用螺旋舀种式排种器,确定了该排种器关键部件的结构和参数;运用Design-Expert软件进行数据分析,得到最优参数组合,采用响应面试验方案,进行台架验证试验。结果显示:播种水稻时,在转速为45 r/min、倾斜角度为3°、出种孔长度为9 mm情况下的合格率为78.20%,重播率为3.71%,空穴率为1%,穴距合格率为97.93%,穴距变异系数为16.17%;播种小麦时,在转速为60 r/min、倾斜角度为1°、出种孔长度为9 mm,此组合下的合格率为93.37%,重播率为3.44%,空穴率为3.19%,穴距合格率为93.60%,穴距变异系数为25.50%。     

新疆‘晚丰’巴旦木花粉萌发培养基组分的筛选

为提高人工授粉中巴旦木的产量,本研究采用花粉离体培养法,筛选新疆‘晚丰’巴旦木品种花粉萌发中不同培养基组分的配方施用量,研究不同培养基配方组分对花粉萌发的影响。实验中在培养基内添加尿素、硼酸、氯化钙、吲哚乙酸、赤霉素和蔗糖,均能促进花粉萌发和花粉管生长,在一定范围内,花粉萌发率和花粉管长度均随培养基配方组份量的增加而增加,但超过一定添加量时,促进作用逐渐减弱并出现抑制作用。研究结果显示:添加0.1%尿素、0.01%硼酸、0.005%氯化钙、0.0001%吲哚乙酸、0.0015%赤霉素和10%蔗糖时,新疆‘晚丰’巴旦木品种花粉萌发率最高,花粉管长度也达到最大值。本研究结果为实践生产中人工授粉和相关研究提供参考和理论依据,也为进一步顺利进行亲和授粉研究提供前期理论基础。     

花粉管通道法转化荔枝的初步研究

为开拓荔枝转基因育种新途径,以GUS基因作为报告基因,用花粉管通道法转化授粉后24 h的‘新球蜜荔’荔枝雌花,并统计座果率、成苗率、转化率。结果显示：共获得303株实生苗,经PCR检测和GUS染色法证实外源基因整合到4株荔枝苗基因组中,转化率为1.32%。此研究结果为荔枝生物技术育种提供了一种简单有效的途径。