PROBABILISTIC EVALUATION FOR STEEL FRAME COLUMNS OF TALL BUILDINGS

Based on properties of parameters and test data of dom-estic steel,this paper analyses the reliability and partial coefficient forresistance of steel frame columns of tall builings.The result may serveas a scientific basis.It is not only for domestic steel instead of importedsteel in building tall steel structures,but also for compiling concerendstandards.     

Resource Management in Application System

Application system generally refers to all kinds of computer information system. It aims at improving the sharing and application of the resource. The resource in application system usually means data resource. For computer management and maintenance, there are not only data resource, but also program resource and network resource. Effective management of this resource is key to ensure proper work of the application system. In this paper, the basic pattern and policy for resource management is put forward and a method to build and realize the resource layer that lies between database layer and application layer is to be found. This management layer, which skillfully connects the application system with resource and establishes good base for application and exploitation of system, is named as resource management system.     

COUPLING ANALYSIS METHOD FOR INTERACTION BETWEEN FOUNDATION WITH CAVERN AND FRAME STRUCTURE

In this paper,the interaction between foundation withcavern and frame structure is studied by the coupling methods of BEMand FEM.On the interface between the foundation and structure,thecoupling analysis needs to satisfy both the condition of displacementcompatibility and force equilibrum.A calculating program for two-dim-ensional problem is worked out in the computer,SIEMENS 7570C.Twoengineering examples are calculated and the results are compared withthose obtained by the comventional simplified method and with the observedresults from the engieering structures.It indicates that it is necessaryfor the weak rock foundation with shallow cavern,in the buried depth,to take the interaction into account.     

A PRACTICAL METHOD OF DESIGNING WALL BEAMS IN FRAMES

Brick masonry wall-beams in frames are girders,carrying brick masonrywalls in buildings with only one or two storied reinforced concrete frames atthe bottom of it.How to anaIyse and design such an element is an outstand-ing problem.In this case,there are no analytical and designing rules in thestate code in force.Therefore,designers have to seek other methods,in whichmost are very conservative and expensive.In order to change this case,thispaper provides an analytical and practical mathod for designers.     

德宏水牛及其杂交品种体尺测定

试验对36～39月龄全放牧饲养的15头德宏、摩本、尼本水牛进行了体尺测定研究，此项试验根据水牛品种不同分为三个处理组。结果显示，杂交水牛尼本的鬐甲高、十字部高、坐骨节宽比德宏水牛分别提高5.5%、7.4%、9%，差异显著。杂交水牛摩本的鬐甲高、十字部高、坐骨节宽比德宏水牛提高5.9%、8.0%、11.9%，差异显著。摩本的肢长指数优于尼本，差异显著。此项试验结果表明，用尼里、摩拉与德宏水牛杂交，提高了德宏水牛的体尺与体况。     

荷电颗粒多相湍流数学模型的构建

随着静电喷雾技术的发展,对荷电多相湍流的研究也不断深入,由于这一流动现场极其复杂,模型构建的难度增大.在多相湍流模型建立的理论基础上,采用双流体模型,考虑湍流脉动与电场耦合作用,引入“体平均”概念,构建了荷电多相湍流数学模型.“双流体”多相湍流模型在工业领域模拟复杂湍流中的成功应用和不断发展,为荷电多相湍流提供了新的工程模拟模型和方法.在单相荷电流体湍流模型方程建立的基础上,根据“双流体”多相湍流模型建立的理论基础,把荷电颗粒当作拟流体处理,借用拟流体多相湍流描述方程建立的方法,推导了荷电颗粒拟流体多相湍流的描述方程,为进一步获得荷电颗粒拟流体多相湍流模型提供了基础.     

摆动式花生收获机整体载荷的试验与分析

从理论上建立了摆动式花生收获机的空间力系模型.在此基础上,围绕摆动式花生收获机的主要试验参数-传动速比、偏心距、栅条长度与前进速度的改变进行了摆动式花生收获机整体载荷的试验.试验证明:花生收获机在工作时所受载荷平衡,通过二次回归旋转组合试验测定整体载荷随4因素的变化规律是显著的,结合花生收获机的实际工作条件分析了回归方程的适用范围.本试验为摆动式花生收获机在功率消耗、力的平衡等方面的进一步改进提供了依据.     

淄博市发展玉米收获机械化的经验与启示

玉米是我国的第二大粮食作物,但是玉米生产过程机械化水平较低,尤其是玉米收获环节机械化水平低,且总体上发展缓慢.因此,玉米收获机械化是我国北方玉米主产区农业机械化发展的重点.近年来,山东省玉米收获机械化出现快速发展势头,特别是山东省淄博市玉米收获机械化水平已经超过了50%,有些县区已经基本实现了玉米收获机械化.为此,从经济基础、农艺技术和农机技术基础、支持政策和农机管理等方面总结分析了淄博市发展玉米收获机械化的经验,并分析了全国玉米收获机械化发展所面临的农业生产工艺技术路线、农业技术装备体系及其农业机械化组织路线问题.在此基础上,提出了推进玉米收获机械化发展的措施.