不同屠宰方式对猪肉品质的影响

选用不同致晕、放血法及烫毛方法对140头杜长大和杜大长三元杂商品猪进行屠宰,测定其肌肉的肉色、pH值、剪切力、失水率等指标。结果表明：在其他条件相同的情况下,烫毛水温为60℃时,烫毛6min,胴体质量最佳。电击致晕生猪,采用悬挂放血,有出现PSE猪肉的倾向;而CO2致晕生猪,采用水平放血或悬挂放血,肉质指标差异不显著。较好的组合是：电击致晕生猪,采用水平放血;而CO2致晕生猪,采用悬挂放血较好。     

装配式地下粮仓钢板-混凝土组合仓壁轴压受力性能分析

为了研究装配式地下粮仓钢板-混凝土组合仓壁的轴压力学性能,该研究在仓壁试件轴压试验的基础上,对仓壁试件进行非线性有限元分析,模拟试件加载的全过程,进一步分析试件及其组件在加载过程中的受力性能及工作机理,并对钢板强度、混凝土强度、距厚比等不同的参数影响规律进行了分析。结果表明：有限元模拟结果与试验结果吻合较好,在最大试验载荷5 000 kN时模拟轴向压缩总变形与试验平均轴向压缩总变形相对差值为4.2%,建立的有限元模型适用;在弹性阶段仓壁预制块部位混凝土和接头部位止水钢板分别承担了79.7%和50.9%的荷载,峰值荷载主要由混凝土和传力钢板决定,达到峰值荷载后接头部位止水钢板承担更大的荷载,增强止水钢板可以改善试件的延性;相较钢板强度、距厚比和止水钢板厚度,混凝土强度对仓壁试件的初始刚度和峰值荷载影响最大,混凝土强度、钢板强度、距厚比和止水钢板厚度对峰值荷载回归得到的回归系数值分别为0.910、0.154、−0.005和0.301;止水钢板的强度和厚度较小时,试件易发生脆性破坏;结合设计参数分析中得到的荷载-变形曲线,提出2种荷载-变形模型曲线,进一步提出装配式钢板-混凝土组合仓壁轴压峰值荷载简化计算式,得到的计算峰值荷载与有限元峰值荷载相对差值均不超过9%,计算结果具有较高的精度。研究结果可为装配式地下粮仓仓壁的工程设计提供指导和参考。     

哈蟆油蛋白多肽的透皮作用研究

比较酶解前后哈蟆油蛋白多肽的相对分子质量、黏度和透皮情况.采用胃蛋白酶-碱性蛋白酶双酶法制备哈蟆油蛋白多肽,应用旋转粘度计测定酶解过程中黏度变化;以离体小鼠的皮肤为透皮屏障,应用透皮吸收仪测定不同透皮时间透皮液中蛋白多肽的透皮率和分子量分布.双酶法制备的哈蟆蛋白多肽黏度从5278.85 mPa·s(1.0 g/100 ...     

Swine viscera preservation in hypersaturated salt solution after alcohol fixation as a preparation method for educational purposes

The use of live animals for educational purposes is an old practice that is still employed in teaching and research institutions. However, there are several objections to this practice, whether for ethical or humanitarian reasons. Surgical techniques teaching using anatomical pieces and/or preserved cadavers promotes greater learning efficiency, provides exercise repetition and increases the confidence and satisfaction of the students when compared to the use of live animals. The current work aimed to analyse the feasibility of using fresh swine urinary bladder and small intestines (jejunum), obtained from slaughterhouses, fixed in 99.8% ethyl alcohol (EA) and preserved in sodium chloride hypersaturated solution (SCHS) at 30%, for 7, 14 and 21 days, as an alternative method for surgical skills training (SST). Swine viscera, fixed in EA and preserved in SCHS, presented a realistic appearance, absence of odour and maintained the viable morphological characteristics during the performance of the operative techniques. Preservation solutions had low cost, were easy to acquire and did not offers risks to human health. Therefore, urinary bladders and small intestines fixed in 99.8% EA for 30 days and maintained in 30% SCHS at different periods were demonstrated as a good viable option as a preservation method for surgical skills training.     

Protein and energy concentrations of meat meal and meat and bone meal fed to pigs based on in vitro assays

The objective of this study was to develop equations for estimating ileal digestible crude protein (CP) and metabolizable energy (ME) contents of meat meal (MM) and meat and bone meal (MBM) as feed ingredients for pigs based on in vitro assays. Test ingredients were 4 sources of MM and 3 sources of MBM. Ash and CP contents of the ingredients ranged from 3.8% to 33.1% and 46.8% to 82.9% (as-is basis), respectively. In vitro ileal disappearance (IVID) of CP was determined and ileal digestible CP content was calculated by multiplying CP content by IVID of CP. In vitro total tract disappearance (IVTTD) of dry matter (DM) was determined and ME was calculated using gross energy, CP contents, and IVTTD of DM. The IVID of CP and IVTTD of DM ranged from 77.2% to 88.7% and from 82.7% to 92.4%, respectively. Calculated ileal digestible CP and ME contents ranged from 37.8% to 73.5% DM and 2,405 to 3,905 kcal/kg DM, respectively. Ash contents were negatively correlated (P < 0.001) with CP (r = −0.99), in vitro ileal digestible CP (r = −0.97), gross energy (r = −1.00), in vitro digestible energy (r = −0.97), and adjusted ME (r = −0.97). The most fitting equations for ileal digestible CP and adjusted ME were: ileal digestible CP (% DM) = 11.91 − 0.90 × Ash (% DM) + 0.74 × IVID of CP (%) (R² = 0.99) and adjusted ME (kcal/kg DM) = 130.85 − 50.90 × ash (% DM) + 47.06 × IVTTD of DM (%) (R² = 0.99). To validate the accuracy of the prediction equations for ME, mean bias and linear bias were determined using a regression analysis. Calculated ME values of MM and MBM were in a good agreement with data obtained from animal experiments based on a statistically insignificant bias in the models. In conclusion, ME concentrations of MM and MBM as swine feed ingredients can be calculated using ash concentration and in vitro disappearance of dry matter.     

实例教学法在建筑电气施工图识图教学中的运用--以人为本，学以致用

文章针对识图教学过程中运用实例教学的重要性进行阐述,并针对实例教学法在建筑电气施工识图教学中的应用加以探讨,以提供理论参考。     

基于灰色关联法的小型农田水利工程建设项目绩效评价研究

运用灰色关联法原理,采用均方差法计算指标权重,根据近年来湖北省进行小型农田水利工程建设项目绩效评价的实际情况,建立了小型农田水利工程建设项目评价定性定量混合指标体系和模型,应用该模型和方法对湖北省2012年第二批20个小农水重点县工程建设项目进行了评价(作为研究,各县、市名以汉语拼音字头代替)。结果表明:LHK、SSS、ZJS、DJK、XTS等14个县为优秀,XCX、TMS、JSX等5个县为良好,CYX为一般,无及格等级的重点县。评价结果与实际基本相符。证明本文所提出的模型和方法可应用于实际,是一种快速便捷的评价工具。     

粉煤灰磁粉表面化学镀铜的研究

粉煤灰磁粉是热电厂生产过程产生的固体废弃物粉煤灰中的一种成分,由于其有内在的磁性和微导电性,通过表面金属化后,能用于制备电磁屏蔽和吸波材料。笔者采用置换反应法在粉煤灰空心磁粉表面进行了化学镀铜的研究。扫描电镜(SEM)和能谱(EDX)分析结果表明,该化学镀方法能在其表面获得良好性能的金属镀层。     

SrNi2Fe16O27铁氧体的合成与性能研究

采用柠檬酸法合成出超微W型铁氧体。用XRD、VSM测试其结构和磁性能。试验结果表明,该法在1000℃制得的铁氧体性能优于其他方法制得的铁氧体,控制pH值、水量和柠檬酸的量对铁氧体的结构和磁性能都有一定的影响。     

半挂牵引车车架异常断裂原因分析

建立了以板壳单元为基本单元的半挂牵引车车架有限元分析模型,针对半挂牵引车在使用过程中车架异常断裂问题,应用NASTRAN有限元分析软件对车架强度进行了静态及模态分析。有限元分析结果表明,车架断裂现象是由于第4横梁与纵梁连接铆钉处和侧翼板前部的第1个铆钉连接处,应力值已大于或接近材料的最小屈服强度,及在该处出现较大的交变应力而产生的。有限元计算结果与实车车架断裂结果相吻合,证明所采取的建模方法和分析方法是可行的。根据实际工艺要求,给出了该车架结构的改造方法,实际改造结果表明改造方法是非常有效的,断裂区的强度有明显提高。与原结构相比,在弯曲和扭转工况下,最大应力值分别下降38%和57%。