ZigBee和线阵CCD技术在西藏智能温室中的应用

利用西藏地区太阳能丰富的优势,采用太阳能资源为主要供能方式,为智能温室系统构建基于Zig Bee协议的无线传感网络和nRF2401无线传感器的双层无线通信网络,以减少西藏地区有线布线成本和解决温室群控制问题。同时,在传统智能温室中结合线阵CCD技术,为智能温室系统提供实时、直观的作物生长状况数据,有效提高对温室内环境因素的监控效率及温室智能自动化控制程度,以满足现代化高效节约型农业的发展形势需求,以及西藏地区特定的地理环境对于农业自动化的需求。     

电子政务在我国农机安全监理业务中的应用探析

对怎样因地制宜，充分利用现有条件和资源发展我国电子政务进行了探索，提出了使用VPN这种花钱少、见效快、管理方便、高效安全的技术手段来构建农机安全监理业务系统．并给出在市级农机安全监理站建立内部业务网络。县级农机安全监理站建立客户终端的方案。     

基于改进YOLO v4的群体棉种双面破损检测方法

针对研究人员难以利用计算机视觉对棉种这类尺寸较小的物体进行双面检测,导致检测效果不佳的问题,设计了一款新型棉种检测分选装置,利用亚克力板在强光和白色背景下透明的特点,将棉种通过上料装置滑入透明亚克力板的凹槽中,随着转盘的转动,同一批棉种的正反两面图像分别由2个不同位置的CCD相机采集得到.利用改进YOLO v4的目标检...     

电量系统的数据拟合与计量方法

在电量信息采集、传输、存储的过程中,常出现丢失数据或数据突变的情况。介绍一种离散数据曲线拟合和计量方法,鉴别数据采集过程中丢失的少量数据信息,并根据采集数据值判断、自动拟合丢失的数据,进而根据这些基本量计算电量信息。     

毛竹和重组竹腐朽前后的表面颜色及耐腐性能

以毛竹和重组竹为研究对象,用绵腐卧孔菌(PV)、密粘褶菌(GT)两种褐腐菌和彩绒革盖菌(CV)、变色栓菌(TV)两种白腐菌进行腐朽试验,比较分析了毛竹和重组竹腐朽前后表面视觉性质及其质量损失差异。结果发现:毛竹和重组竹颜色均发生了显著变化,主要表现为明度(L~*)降低,色度值(C)、红绿轴色品指数(a~*)和黄蓝轴色品指数(b~*)显著增大,其中绵腐卧孔菌对毛竹及重组竹的色差影响最大。重组竹(耐绵腐卧孔菌)能达到Ⅰ级强耐腐水平;毛竹(耐绵腐卧孔菌)和重组竹(耐密粘褶菌和彩绒革盖菌)达到了Ⅱ级耐腐水平;毛竹(耐密粘褶菌、彩绒革盖菌和变色栓菌)和重组竹(耐彩绒革盖菌)为Ⅲ级稍耐腐水平。整体来看,重组竹对白腐菌和褐腐菌的耐腐效果好于毛竹。绵腐卧孔菌虽然对毛竹和重组竹的降解能力最弱,但对其颜色变化的影响却最大。扫描电镜可观察到彩绒革盖菌通过毛竹导管壁上的纹孔进入薄壁细胞、伴胞等,同时通过分泌木质素酶导致其细胞壁降解。     

生防因子螺旋毛壳ND35的细胞壁降解酶与重寄生作用

1　IntroductionSomespeciesofthesaprophyticascomycetegeneraChaetomiumKunzeexFr .arepotentialantagonistsofseveralplantpathogenicfungi ,forexampleRhizoctoniasolaniandPythiumultimumwhichcauseseedlingdamping -offandVenturiainaequaliswhichcausestheapplescabChae…     

Simultaneous measurements of quantum yield and CO2 uptake for the assessment of non-assimilative electron flow in tree leaves

Using attached and detached leaves ofAcer palmatum Thunb. andRhaphiolepsis umbellata Makino, pulse-modulated chlorophyll fluorescence and CO₂ exchange were measured. Quantum yield of photosynthesis was determined from the fluorescence parameter(Fm′−Fs)/Fm′, where (Fm′−Fs) was defined as the difference between steady state chlorophyll fluorescence (Fs) and maximum fluorescence (Fm′) elicited by a saturating light pulse. The rate of electron transport through photosystem II (total electron flow) was calculated from the product of quantum yield andA (PFD), whereA is the rate of absorbed photons as given by leaf absorptance, and PFD is the photon flux density at the leaf surface. The rate of electron transport dependant on CO₂ uptake (assimilative electron flow) was calculated from the gross photosynthetic rate in a leaf. The difference between the rates of total and assimilative electron transport was denoted as the rate of non-assimilative electron transport which depends on photorespiration and oxygen reduction. Available data provided quantitative information on the rate of non-assimilative electron flow in intact leaves. When leaf photosynthesis ofA. palmatum was measured under sunlight, the rates of total and assimilative electron transport were determined to be approximately 900 and 150 μmol equiv. e/mg Chl·h, respectively. The difference (750 μmol equiv. e/mg Chl·h) was attributed to the activity of non-assimilative electron flow. The ratio of total to assimilative electron flow was found to increase gradually with rising in irradiance. The results suggest that non-assimilative electron flow occurred at much higher rate than assimilative electron flow at high irradiance. Implications of the results are briefly discussed in relation to photosynthesis limitation in tree leaves.     

碱蓬和盐地碱蓬花粉形态研究及其在分类上的贡献

借助光学显微镜和扫描电镜研究了碱蓬属2种植物碱蓬和盐地碱蓬的花粉形态，并对不同生境条件下盐地碱蓬4变式的花粉形态进行了对比研究，研究结果表明：花粉粒外部形态成球形；大小在15.4-24.0μm之间；具有散萌发孔，萌发孔数量在46－55之间，萌发孔直径为3．1－5．4μm；花粉粒表面光滑，其上散布许多颗粒状小突起，萌发孔上亦有数目不等的小突起。以上数值在不同种间有较明显的差异，在盐地碱医宵同生态变式间亦有差异，但差异较小。这些细微的特性差异可为碱蓬属植物分类提供参考依据，是研究该属植物分类及生态的新资料。     

窥镜技术在植物根系监测中的应用

窥镜探测技术是传统内窥镜技术与现代计算机技术、微电子技术、图象处理技术等新技术的不断发展和融合的产物,窥镜探测系统由窥镜摄影系统、图象处理和图象分析三部分组成,它采用彩色面阵CCD摄像元件,接收信息后送计算机处理。本文给出了窥镜技术在植物根系系统中的设计要点和实际应用。     

Delignification of cell walls of <Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis> during alkaline nitrobenzene oxidation

To clarify the behavior of whole lignins in wood cell walls during alkaline nitrobenzene oxidation, the delignification process from cell walls in normal and compression woods of Chamaecyparis obtusa Endl. (Cupressaceae) was observed using ultraviolet and transmission electron microscopies. The lignin content conspicuously decreased to around 10% after 35min in normal wood. The lignin content in compression wood finally leveled off at aroumd 10% after 50min. In gel filtration of oxidation products in ethyl acetate, a high molecular weight fraction was prominent in extracts from the early stage of the reaction. As the oxidation progressed, the high molecular weight fraction became less prominent in both normal and compression wood. Changes in the weights of cell wall residues during reaction indicated that approximately half of the components other than lignin were also removed from the cell walls. This shows that the majority of lignin with relatively high molecular weight is removed from the cell walls together with polysaccharides in the early stage of the reaction and that further oxidative degradation occurs in solution in later stages. Only a small amount of the lignin with low molecular weight could be analyzed by gas chromatography.Parts of this report were presented at the 47th (Kochi, April 1997) and 48th (Shizuoka, April 1998) Annual Meetings of the Japan Wood Research Society, and at the Lignin Symposium, Sapporo, October 1997