Performance indicators for irrigation and drainage

This paper summarises the performance indicators currently used in the Research Program on Irrigation Performance (RPIP).Within this Program field data are measured and collected to quantify andtest about 40 multidisciplinary performance indicators. These indicatorscover water delivery, water use efficiency, maintenance, sustainability ofirrigation, environmental aspects, socio-economics and management. Theindicators now are sufficiently mature to be recommended for use inirrigation and drainage performance assessment.     

常温超高压提取水飞蓟素的研究

为了研究超高压提取水飞蓟素的最佳工艺条件,采用超高压方法在常温条件下提取,正交试验优化设计,紫外分光光度法测定水飞蓟素含量,并与有机溶剂回流提取结果比较.试验得到:超高压提取的最佳工艺条件如下:溶剂75%乙醇,压力400MPa,液固比50mL/g,提取时间3min;提取物纯度28.8%,水飞蓟素收率2.424%,分别高出回流提取35.8%和12.2%.最后得出,超高压提取具有提取温度低(室温)、耗时短、耗能少、提取物纯度高,为水飞蓟有效成分的提取提供了一个新方法.     

小型梳穗收获机收获损失的分析与试验

小型梳穗收获机运用梳穗收获原理,一次完成田间站秆谷物梳脱、粒穗分离、复脱、清选和装袋等工序.梳穗收获中,谷物损失率是衡量小型梳穗收获机性能的重要指标.为此,对影响其损失率大小的因素进行了分析,进行了一系列室内外单因子性能试验和正交试验,找出了最佳的结构参数.     

柴油机燃烧过程及NOx排放的试验研究

测量分析柴油机气缸压力、负荷特性、NOx、HC、CO和烟度等废气排放,并测量分析了供油提前角对动力性、经济性及排放的影响.试验结果表明:供油提前角提前时,柴油机气缸压力增加,NOx增加;负荷增加时,NOx排放浓度增加;但NOx比排放除了在小负荷时较大外,在中等及大负荷时基本保持不变.     

柴油机燃用菜籽油的耐久性试验研究

柴油机燃用菜籽油植物油的短期耐久试验证明了植物油可作为一种代用燃料,但同时也暴露出了一系列的问题.试验后观察试验柴油机的主要零部件可看到:燃烧室的表面有大量的积碳、喷油器结焦、气门黏滞、缸套轻微刮伤等现象.这导致了柴油机性能的下降、油耗的升高和经济性的下降.其中,喷油器结焦和气门黏滞是性能下降的主要原因.     

Controlled water table management as a strategy for reducing salt loads from subsurface drainage under perennial agriculture in semi-arid Australia

Recent community based actions to ensure the sustainability of irrigation and protection of associated ecosystems in the Murrumbidgee Irrigation Area (MIA) of Australia has seen the implementation of a regional Land and Water Management Plan. This aims to improve land and water management within the irrigation area and minimise downstream impacts associated with irrigation. One of the plan objectives is to decrease current salt loads generated from subsurface drainage in perennial horticulture within the area from 20 000 tonnes/year to 17 000 tonnes/year. In order to meet such objectives Controlled Water table Management (CWM) is being investigated as a possible ‘Best Management Practice’, to reduce drainage volumes and salt loads.During 2000–2002 a trial was conducted on a 15 ha subsurface drained vineyard. This compared a traditional unmanaged subsurface drainage system with a controlled drainage system utilizing weirs to maintain water tables and changes in irrigation scheduling to maximize the potential crop use of a shallow water table. Drainage volumes, salt loads and water table elevations throughout the field were monitored to investigate the effects of controlled drainage on drain flows and salt loads.Results from the experiment showed that controlled drainage significantly reduced drainage volumes and salt loads compared to unmanaged systems. However, there were marked increases in soil salinity which will need to be carefully monitored and managed.     

35CrMo旋转接头激光表面硬化技术的试验研究

用L9(34)正交试验法研究35CrMo旋转接头激光相变硬化工艺参数优化组合,分析了旋转接头激光相变硬化方法.试验结果表明:激光相变硬化层硬度比渗氮淬火提高了30%,耐磨性提高了1倍,表面残余应力为压应力;满足了旋转接头工作要求,为改进旋转接头表面处理方法提供了依据.     

375型柴油机燃油系优化匹配的实验研究

在375型柴油机减烟试验中，应用正交设计试验找出最显著影响因素，采用旋转回归设计试验建立了综合性能随喷油嘴启喷压力及供油提前角而变化的关系，通过燃油系优化匹配，达到了较好的减烟节油效果。     

分析阶梯流量井流试验数据的线性回归法

文中应用线性回归法，对一次阶梯流量井流试验数据进行适当交换后，可得回归直线方程，与目前采用的多次阶梯流量井流试验数据的分析相比较，在同样可以得到井流实验欲求的井损系数C，综合参数和含水层导水系数T三个参数的情况下，至少可以使抽水量的变化次数减少两次。实际算例表明，一次阶梯流量井流与多次阶梯流量法的计算结果非常吻合。     

滚筒式残膜回收机的理论设计和试验研究

农用塑料薄膜都是聚乙烯烃类化合物,自然条件下极难降解,在土壤中可存在200～400年.为此,介绍了残膜对农业生产的危害和残膜回收机研究的重要性;并设计了一种滚筒式残膜回收机,阐述了该机的工作原理及其有关设计参数.通过试验表明:该机结构简单,工作可靠,动力消耗少,适应性广.