人在环路模拟驾驶仿真实验系统研发

汽车是人机协同控制的复杂系统,基于NI PXIe8108实时控制器、PXI7842R数据采集卡、模拟驾驶输入设备及相关软硬件搭建了驾驶模拟仿真系统;用LabVIEW编程语言建立了车辆动力学模型;用虚拟引擎Unity3D软件开发了视景系统;并通过数据库技术使仿真过程与视景系统相结合,实现仿真过程与三维动画实时视景系统的数据交互。结果表明：通过人在环路模拟驾驶仿真实验,使仿真过程中引入了驾驶模拟操纵,实现了人在环路的人机交互式仿真,得到汽车相关性能仿真结果,为驾驶过程中人和汽车协同控制仿真和极端工况下的仿真,提供了一种安全、可靠的人车协同控制仿真环境。     

Dynamic Modeling and Simulation of 440 t/h Steam-cooled Cyclone Separator for CFB Boiler

A dynamic mathematical model of the steam-cooled cyclone separator in a 440 t/h CFB boiler has been established.Based on the mathematical model,simulation model of the cyclone separator is created with the advanced continuous simulation language(ACSL).The validity of this model has been verified by the simulation experiments and analysis.This model can provide a theoretical guidance for operation and optimal design of the cyclone separator.     

Calculating the Hollowing-center Grounding Device Resistance Based on the Surface Charge Simulation Method

An equivalent model for hollowing-center grounding device is proposed, the hollowing-center grounding device resistance is calculated with the surface charge simulation method and the computer programme is programmed based on this model. The accuracy of the model and method is validated by experimentation.     

STUDY OF DIGITAL SIMULATION MODEL FOR THE MAGNETIZING CHARACTERISTIC OF REACTANCE TRANSFORMER

Based on the experiment, magnetizing characteristic and its mathematical model of iron for the reactance transformer DKB has been studied in this paper. Its simulating calculation model has been achieved and implemented by program. The result of the simulation is satisfactory compared with that of the experiment.     

Monitoring and Assessment of Tie on the Caiyuanba Yangtze Bridge

The monitoring and assessment scheme of the Caiyuanba Yangtze Bridge is present by sensitivity analysis. The mechanics character of the six ties is studied by numerical simulation, and then the sensor location and selection are discussed considering the technique of sensor and construction situation. The trend of the displacement at the sensor location is analyzed according to different damage level of ties, the pattern associating with several displacements which are sensitive to damage at ties is bring forward to improve assessment reliability. The result can assist implement of structural health monitoring system to the same type as this bridge.     

Analysis on Longitudinal Cracks and Deflection of the Pre-stressed V-shape Slab Roof Structure

In this paper, the finite element method is used to analyze the behavior of the prestressed V-shape Slab Roof structure, especially the effect of temperature change on the stress of slab. The calculated results indicate that when the temperature changes, the tensile stress at the lower extreme fibers of the flange plate near rib exceeds the tensile strength of concrete subjected to the combined action of triaxial stresses and results in the longitudinal cracks of the flange plate. The deflection analysis is based on the mechanical model of the prestressed V shape slab with the longitudinal cracks. The calculated results are in general agreement with the field observations.     

Soft-switching Analysis Phase-Shifted-FB-ZVS-PWM DC-DC Converter With Saturable Inductor

Compared with the traditional full-bridge(FB)zero-voltage-switched(ZVS) pulsewidth-modulated(PWM) converter, the FB-ZVS-PWM converter with a saturable inductor has a wider load range with ZVS and smaller circulating energy as well as smaller duty cycle loss. By analyzing the operation principle of the converter, this paper studies design considerations of the parameter bringing about ZVS and dead time of the switch, and gives out the design method, finally simulation testing has been carried out.     

Harmonic Analysis and Suppression of High-frequency Welding Devices

This paper analyzes the structure and line current waveform of 3-phase AC voltage regulation circuit. As an application of 3-phase AC voltage regulation circuit, a high-frequency welding device's simulation model and harmonic analysis of line current are presented. Results of simulation are compared to field measurements. The two are in a good agreement, so this simulation model is correct. Two single-tuning filters and one second-order HPF are designed according to the device's harmonic condition. Simulation results of the circuit with filters indicate decrease of the harmonics in current of power supply, and the waveform is close to sinusoidal wave, which prove correctness of the solution to harmonics pollution.     

Rectangular Cover System of Manifold Method and Its Auto Mesh Algorithm

In contrast to the finite element method, another form of numerical method which is based on the using of rectangular math covers in manifold method is proposed. In this method, the element data is not a necessary in the input data files and it can be incorporated with the CAD technology conveniently. The theory and application of the method are discussed and the auto mesh algorithm of the cover system is also given in this paper. The numerical examples indicate that the method and the algorithm are accurate and effective.