On Determinative Parameters of SDOF Systems in Elasto- plastic Earthquake Response

Parameters dominating elasto- plastic earthquake response of SDOF systems,relation between ground motion amplitude and elasto- plastic response of SDOF systems are presented in this paper.     

垄膜沟种涌泉灌溉技术要素的试验研究

在垄膜沟种农田进行了涌泉灌灌水试验，通过对水流推进过程观测，分析了田面水流运动特性，研究了沟宽对田间灌水均匀度的影响，并对垄膜沟种涌泉灌溉技术要素进行了探讨。结果表明，涌泉灌田面水流推进曲线可用幂函数表示。随着沟宽的增大，灌水均匀度呈下降趋势。从灌水质量和管网成本两方面综合考虑，试验条件下灌水技术要素的入沟流量、沟宽和灌水器间距分别以80～100L/h、20-30cm和4～5m为宜。     

残膜回收工艺和收膜机构

介绍了田间残膜的特性及机械化收膜工艺、残膜同收机中常用收膜机构的种类及工作特性，为残膜回收机的研究设计及主要工作部件结构的优化组合提供参考。     

Effects of arrangement of surge-rootirrigation emitters on growth,yield andwater use efficiency of apple trees

Six-year old apple trees were selected for field experiment. The objective of this study was to obtain the reasonable arrangement of surge-root irrigation emitters in apple orchards. There were three factors: the buried depth H( 25,40,55 cm),the horizontal distance L( 30,40,60 cm) between the emitters and the trunk of the experimental tree,and the number of the irrigation emitters N( 1,2,4). The effect of the arrangement of surge-root irrigation emitters on the growth,yield and irrigation water use efficiency( IWUE) of apple trees were studied in Northern Shaanxi where the irrigation quota takes 60%-75% of the field water capacity. The results showed that the arrangement of emitters for surge-root irrigation had a significant effect on apple tree yield and IWUE,especially,the yield and IWUE reached 28 388. 17 kg/hm2 and 16. 83 kg/m3 in treatment T3,respectively. At the same L and N levels( T1,T2,and T3),the yield and IWUE in treatment T3 were the highest,and the yields in treatments T1 and T2 were decreased by 26.22% and 31.48%,while IWUE is reduced by14.02% and 18.12% compared with T3,respectively. At the same H and N levels( T3,T4,and T5),the yield and IWUE of apple trees were decreased with increasing L level. Especially,when L was 30 cm( T3),the yield and IWUE were the highest. The same L and H levels( T3,T6,and T7) could promote the growth of apple trees when N was 2( T3). Compared with treatment T3,it was found that the increment of new shoots was decreased by 8.07%-18.71%,and the fruit diameter was decreased by 5.41%-9.11%. Therefore,two emitters should be arranged symmetrically on both sides of an apple tree,each was buried at a 40 cm depth and 30 cm away from the trunk of the tree to effectively improve the yield and IWUE of the apple tree in mountainous areas in Northern Shaanxi.     

表面油流法显示螺旋离心泵内部流动的研究

对螺旋离心泵叶轮、进水节和进水节与蜗壳交界处的部分端面做了表面油膜、油点试验。通过流谱分析，揭示了表面奇点、分离线与再附着线等流动特征，研究了螺旋离心泵内部流动规律，进而提出了改进螺旋离心泵结构的设想。     

1MC-70型地膜回收起茬机铲刀结构和参数确定及试验研究

通过对1MC-70型地膜回收起茬机起膜、起茬铲刀的作业情况分析，推导出铲刀满足生产要求主要参数的求取方法和公式，并经理论分析和试验研究，确定了铲刀对玉米茬地进行起膜、起茬时主要参数的取值范围和减小牵引阻力的取值规律。通过多副铲刀的对比试验，选取出对玉米茬地进行起膜、起茬作业时，性能良好，牵引阻力较小的铲刀。     

苗期地膜回收机的起膜轮的设计

针对现有苗期地膜回收机都是采用弹齿扎入地膜再回收,容易造成地膜的破损而不便于整体回收的问题,设计了一种柔性弹齿起膜轮,能够在不挑破地膜的前提下,将地膜由下向上整体托起并卷到收膜轮上,从而达到较完整地收集地膜的目的;同时,提出了一种计算滚筒驱动功率的方法.试验表明,该起膜轮能够实现设计要求.     

水稻插秧机植物纤维地膜敷设装置开口机构设计

针对自制的水稻插秧机植物纤维地膜敷设装置由秧爪直接进行开口插秧、而导致开口质量较差的问题,利用ADAMS建立了偏心齿轮式分插机构的运动仿真模型,通过轨迹跟踪及逐次逼近的方法确定了开口刀尖点的最优坐标为(-159.8,54.9)。依此建立双臂同步开口机构仿真模型并对开口插秧过程进行了仿真模拟,结果表明机构满足设计要求。最后,对同步开口机构开口刀的装配结构进行了优化设计。