琼岛杨一年生播种苗生长节律研究

于2019年5月6日到12月25日对海南省琼岛杨Populus qiongdaoensis一年生播种苗的苗高、地径生长量进行定期观测,采用Logistic方程进行生长进程拟合,研究琼岛杨的苗期生长节律。结果表明,琼岛杨苗高和地径生长都呈现"慢—快—慢"的"S"形生长规律,且苗高、地径生长量与Logistic方程的回归相关性达到极显著水平,其相关系数分别达0.994和0.996。苗高生长速生期约119 d,占生长期的39.67%,占苗高年总生长量的63.77%;地径生长速生期约125 d,占生长期的45.42%,占地径年总生长量的66.15%。     

秃杉大径级用材林抚育采伐技术的研究

结合国家林业行业标准《秃杉速生丰产林》编制的要点,对秃杉大径级用材林抚育采伐进行了专项调查和研究;结合具体实际培育过程,有的放矢地提出了培育目标、分区生长指标以及抚育采伐的原则、对象和范围,为秃杉大径级用材林的培育提供了技术保障。     

不同配方保鲜液对康乃馨鲜切花保鲜效果的影响

为提高康乃馨鲜切花的保鲜效果,以鲜切花康乃馨马斯特(Dianthus caryophyllus L.Master)为试材,以乙醇、蔗糖、8-羟基喹啉、硝酸钙的不同混合液为保鲜液,测定不同保鲜液处理对马斯特相关指标的影响。结果表明:不同保鲜液处理在增大花径、保持鲜切花水分平衡、延缓花瓣膜透性增加、抑制鲜切花体内膜脂过氧化等方面均优于对照;其中保鲜液采用3%乙醇+3%蔗糖+200mg·L~(-1) 8-羟基喹啉+200mg·L~(-1)硝酸钙处理效果最好,相比对照能够延缓衰老进程、提高观赏价值,可以作为康乃馨鲜切花的理想保鲜液进行使用。     

Morphological and Physiological Responses of Plantain (Plantago lanceolata) and Chicory (Cichorium intybus) to Water Stress and Defoliation Frequency

Plants are often subjected to periods of water stress. There are little data examining the effect of water stress on the forage species Plantago lanceolata and Cichorium intybus. In two pot experiments with P. lanceolata and C. intybus, morphological responses under optimum, dry, and very‐dry water treatments with weekly, fortnightly and 3‐weekly defoliation intervals and physiological responses under optimum and very‐dry water treatments were measured. A third experiment compared the rooting depths of P. lanceolata and C. intybus under field conditions. These findings suggest that both P. lanceolata and C. intybus can survive and continue to grow under water stress conditions with the main differences between the two species being attributable to morphological characteristics (root mass, taproot diameter and shoot mass fraction) rather than differences at a physiological level. Overall, the results suggest plantain may be more productive under moderate drought due to its greater shoot mass fraction, whereas chicory may be more productive and persistent under severe drought due to its greater root mass, taproot diameter and root depth under field conditions.     

帽儿山地区脂松种源试验林生长指标分析

引进优良的外来树种可以丰富本国或本地区林业建设的树种资源,增加木材产量和林产品的种类。通过对引进的美国东部7个脂松种源进行试验,得出更适宜栽植区的种源。在树高方面,较好的4个种源依次为MIDC(Dickenson County,Michigan)、MNCNF(Chippewa National Forest,Minnesota)、MIMC(Manistee County,Michigan)和WIOC(Oneida County,Wisconsin);2004年高生长较好的4个种源依次为WIOC、MIDC、MIMC和MNCNF;2005年高生长较好的4个种源依次为MIDC、MIMC、MNCNF和WIOC;地径较好的4个种源依次为MIDC、WIOC、MIMC、MNCNF。该4个种源间各项生长指标差异不显著;在保存率方面,7个种源间差异不明显。     

炭化条件对竹原纤维炭孔隙结构的影响分析

为研究炭化竹原纤维的特性,进一步提升竹原纤维的使用性能,拓宽竹原纤维的应用领域,采用可控电炉制备了不同炭化温度和不同保温时间条件下的炭化竹原纤维,利用全自动比表面积及孔隙度分析仪测试了炭化竹原纤维的比表面积、比孔容及平均孔径,探讨了炭化条件对其性能的影响。结果表明：随炭化温度的升高和保温时间的延长,炭化竹原纤维的比表面积、比孔容和孔径分布先增大后减小,在较优的工艺条件下,炭化竹原纤维的比表面积和比孔容最大值分别可达819.35m2/g和0.7358cm3/g,平均孔径最小可达2.0836nm。     

修剪方式对广玉兰大树移植成活率及生长的影响

为提高大树移植成活率及探索修剪方式与大树移植成活生长的关系,以20a以上生广玉兰为试材,以全冠移植为对照(CK),分别采用剪去1/3枝叶量的轻度修剪(QX)、剪去2/3枝叶量的中度修剪(ZX)和不留枝叶的截干回缩修剪(JX)3种方式修剪后移植,经过3a连续试验观察,研究不同修剪方式对广玉兰大树移植成活率和生长的影响。结果表明,与CK相比,3种修剪方式极显著提高广玉兰移植后的成活率和新生叶片数、第2年(2013年)和第3年(2014年)的侧梢数、侧梢长度和底径以及第1年(2012年)和第3年(2014年)冠幅生长;与其他2种修剪方式相比,JX显著提高广玉兰移植成活率、第2年(2013年)和第3年(2014年)的侧梢数、顶梢长度、侧梢长度及冠幅生长以及第3年(2014年)的新生叶片数;显著提高第2年(2013年)和第3年(2014年)的侧梢底径。表明截干回缩修剪更有利于广玉兰大树移植的成活和复壮生长。     

The effect of orifice shape and the injection pressure on enhancement of the atomization process for pressure-swirl atomizers

The following paper presents results of studies on the atomization process of water in pressure-swirl atomizers with different shapes of orifice using a laser diffraction technique. The effect of the shape of the orifice and the injection pressure on the droplet size distributions and mean droplet diameters was analyzed. The results obtained showed that droplet size decreases with an increasing injection pressure and droplet size distributions are expanded. The smallest droplet diameters were obtained by atomization in profiled and conical shaped orifice atomizers, however the largest droplet diameters were achieved for plain orifice atomizers. The analysis of the interfacial surface produced by the atomizers has shown that the greater enhancement of the atomization process had occurred using profiled and conical shaped orifice atomizers compared with plain orifice atomizers. The correlation for the Sauter mean diameter as a function of the Reynolds number and the ratio of orifice length to diameter has been proposed. The paper is related to agricultural water management. The data obtained are important from the point of view of the design of atomizers, agricultural treatments and crop protection.     

保定地区几个早熟苹果品种(系)生长观察

为筛选适宜保定地区栽植的早熟苹果品种,以嫁接在SH40中间砧上的不同早熟苹果品种(系)为试材,测定了不同品种(系)早熟苹果树体生长发育指标和果实品质。结果表明:除嘎啦早熟变异外,其他供试品种(系)树体生长较好,3年生时Xu2-7、Xu3-2树高330.0~352.5 cm,4年生时为394.0~417.5 cm,Xu3-2、藤牧1号、信浓红4年生为336.5~381.0 cm。4年生时,干径以Xu2-5最大;短枝、中枝、叶丛枝均以Xu2-5最多,长枝以Xu2-7最多,总枝量以Xu2-5最多;藤牧1号短枝所占比例最高(57.4%)。应用模糊综合评判法得出Xu2-5、Xu2-7、信浓红、藤牧1号果实品质较高。     

Evaluating and Comparing the Natural Cell Structure and Dimensions of Honey Bee Comb Cells of Chinese Bee,Apis cerana cerana (Hymenoptera: Apidae) and Italian Bee,Apis mellifera ligustica (Hymenoptera: Apidae)

The hexagonal structure of the honey bee comb cell has been the source of many studies attempting to understand its structure and function. In the storage area of the comb, only honey is stored and no brood is reared. We predicted that honey bees may construct different hexagonal cells for brood rearing and honey storage. We used quantitative analyses to evaluate the structure and function of the natural comb cell in the Chinese bee, Apis cerana cerana and the Italian bee, A. mellifera ligustica. We made cell molds using a crystal glue solution and measured the structure and inclination of cells. We found that the comb cells of A. c. cerana had both upward-sloping and downward-sloping cells; while the A. m. ligustica cells all tilted upwards. Interestingly, the cells did not conform to the regular hexagonal prism structure and showed irregular diameter sizes. In both species, comb cells also were differentiated into worker, drone and honey cells, differing in their diameter and depth. This study revealed unique differences in the structure and function of comb cells and showed that honey bees design their cells with precise engineering to increase storage capacity, and to create adequate growing room for their brood.