论中国现代大学精神的重构

传承、弘扬和培育优良的大学精神，是现代大学共同面临的现实间题。笔者从现代大学精神的内涵和基本功能的阐释入手，提出了现代大学精神的本质。在此基础上，分析了现代大学精神缺失的表象，进而提出要树立新的理念重构现代大学精神。     

基于芯样的沥青路面抗剪性能评价指标

以沥青路面的取芯芯样为研究对象,采用动载单轴贯入试验方法,通过有限元理论分析和对比试验确定了试验条件和参数,确定以一定作用次数下的贯入深度作为指标,能够较好地评价沥青路面的抗剪切性能.     

Epidemiological Cut-off Values (ECOFFs) of Salmonella from Chicken Intestinal Tract for Three Animal-specific Antibiotics

In order to establish epidemiological cut-off values (ECOFFs) of Salmonella for three animal-specific antibiotics (florfenicol,apramycin and danofloxacin) in Guangdong province.A total of 166 strains of Salmonella isolates from chicken intestinal tract from veterinary clinics and farms in Guangdong province in 2017 were recruited in this study,the minimum inhibitory concentrations (MIC) of florfenicol,apramycin and danofloxacin were determined in triplicate for each bacterial strain using the agar dilution method on Mueller-Hinton agar plates according to the CLSI reference method (CLSI-M100-S26).ECOFFs were calculated for the MIC data sets by application of nonlinear regression analysis,NRI(normalized resistance interpretation) and ECOFFinder software.MIC distribution of florfenicol,apramycin and danofloxacin against Salmonella from 2 to >512,4 to >512 and 0.015 to 64 μg/mL,respectively.MIC₅₀ and MIC₉₀ for apramycin,florfenicol and danofloxacin were 256 and >512,16 and >512,0.5 and 16 μg/mL,respectively.MIC distribution of apramycin and florfenicol presented obvious unimodal shape,while that of danofloxacin was a discontinuous multi-peak.The ECOFFs of florfenicol,apramycin and danofloxacin were recommended to be 16,16 and 0.125 μg/mL,respectively.In present study,the ECOFFs of Salmonella from chicken intestinal tract for apramycin,florfenicol and danofloxacin were determined,which provided scientific basis for resistance surveillance.     

当前我国青少年主流价值观的建构

当前我国青少年主流价值观的建构应通过课堂教育、典型感化、参与社会实践活动等途径，教育和引导他们树立社会主义的主流价值观。     

当代大学生择业观存在的问题及其引导

本文分析了大学生择业观取向发展轨迹, 剖析了大学生择业观取向的内在冲突, 阐明了通过择业观念、就业指导、职业生涯规划、社会实践、创业教育等途径来帮助大学生确立正确的择业观。     

头孢氨苄免疫层析表面增强拉曼光谱检测方法研究

【目的】 建立一种简便、快速、灵敏度高、特异性强的头孢氨苄免疫层析表面增强拉曼光谱(SERS)检测新方法。【方法】 制备金银复合核壳结构的纳米贵金属,用来标记头孢氨苄抗体和拉曼信号分子5,5’-二硫代双2-硝基苯甲酸 (DTNB),合成拉曼免疫探针,用透射电子显微镜和双光束紫外分光光度计对纳米金和修饰拉曼信号分子的金银复合核壳结构进行表征。将合成的拉曼免疫探针固定在微孔板上,待测样品中的头孢氨苄与包被在硝酸纤维素膜上的头孢氨苄抗原竞争结合拉曼免疫探针,通过免疫层析试纸条结合共聚焦拉曼光谱仪读取DTNB的信号值,建立头孢氨苄定量检测技术,并应用于实际牛奶样品的检测。【结果】 透射电子显微镜和双光束紫外分光光度计表征结果显示,纳米银成功包裹在金颗粒表面。用共聚焦拉曼光谱仪检测免疫层析试纸条上拉曼信号分子的特征峰,拉曼信号分子特征峰为1 062、1 154、1 334和1 558 cm^-1,其中1 334 cm^-1处特征峰信号最强,选取此处峰高定量测定头孢氨苄的含量。头孢氨苄免疫层析表面增强拉曼光谱检测的线性范围为0~1 ng/mL,检测限为0.001 ng/mL,头孢氨苄的半数抑制质量浓度为0.05 ng/mL。与头孢克洛交叉反应率为111.1%,与头孢曲松钠、头孢夫辛酯、头孢噻吩钠交叉反应率均低于0.1%。实际样品加标浓度为1、4和8 ng /mL,回收率分别为94.4%、103.3%和97.5%。【结论】 本研究建立的头孢氨苄免疫层析表面增强拉曼光谱检测方法操作简便、快速、灵敏,耗材成本低廉,可满足奶牛养殖农场和乳品加工企业进行大批量样品初筛检测需求。     

741杨缺素症状和最适pH值的研究

用溶液培养法研究了741杨的缺素症状和最适pH值。观察了5种大量元素的缺素症状,缺素对苗木生长和生物量的抑制顺序为N>K>P>Mg>Fe.缺素对叶绿素含量的抑制顺序为N>Fe>K>Mg>P.缺素会降低叶内其它必需元素的含量。741杨苗木生长的最适pH值为4.84～7.03,适应pH值为7.46～8.22,它能在pH4.84～8.22的范围内正常生长,在极限pH值(pH4和pH10)生长受抑制较大,但未出现坏死等症状。     

Indices of soil nitrogen availability for an ecological site classification of British forests

An adequate supply of nitrogen (N) is essential for the successful establishment and sustainable productivity of forest stands. N deficits may necessitate the use of artificial fertilisers. Availability of N in the inorganic forms, and the relative abundance of the NO₃-N and NH₄-N components, influences the species composition of natural forest vegetation. Hence it is essential to use reliable measures of soil N supply that fully reflect its ecological significance. The new Ecological Site Classification (ESC) used in British forestry employs a multi-factorial definition of soil nutrient regime (SNR), including soil N. To develop this, a soil and vegetation study was made at 89 forest sites throughout Great Britain covering the major soil types used for forestry. “Total N” levels were compared with separate pre- and post-incubation measures of the two inorganic N components as potential indices of soil N supply. Multivariate statistical analysis showed that the major discriminant chemical variables for the sampled soils were pH, calcium and NO₃-N and that these were also the main variables influencing the species composition of the ground vegetation. Total N and NH₄-N were less effective discriminant variables for these sites. In some infertile soils the levels of NH₄-N or total N may be of greater importance, as NO₃-N is usually in very limited supply. A multivariate gradient of SNR, which incorporates the NO₃-N measures, has been adopted for use within the ESC system. The position of a site on this gradient can be estimated quantitatively from soil type, ground vegetation species composition and humus type. This enables soil N supply and overall SNR to be assessed in a simple but effective way that guides the operational management of British forest soils for sustainable productivity. It will also be possible to use these techniques to monitor the nutritional status of forest sites over time.     

Manufacture and mechanical properties of binderless boards from kenaf core

Binderless boards were prepared from finely ground powders of kenaf (Hibiscus cannabinus L.) core under varying manufacturing conditions. This research was designed to investigate their mechanical properties and evaluate the various manufacturing conditions: pressing temperature and time, pressing pressure, board density, board thickness, grain size of raw materials, and addition of furfural. The mechanical properties (i.e., modulus of rupture and elasticity, internal bonding strength) of boards increased with increasing board density and met the requirement for 15 type medium-density fiberboard (MDF) by JIS A 5905-1994. Thickness swelling and water absorption of boards exceeded the maximum permitted levels for 15 type MDF and S20 grade hardboard by JIS A 5905-1994, which indicates the low water-resistant property of binderless boards. In contrast to that in usual wood-based materials, internal bonding strength showed significant correlations with other board properties: modulus of rupture and elasticity, thickness swelling, and water absorption. We confirmed experimentally that the best manufacturing conditions proved to be as follows: pressing temperature 180°C, time 10min; pressing pressure 5.3MPa; board thickness 5mm; board density 1.0g/cm³; average grain size 53µm; and powder with no furfural content.Part of this paper was presented at the 52nd Annual Meeting of the Japan Wood Research Society, Gifu, April 2002