坝下黄土台地对土坝变形影响问题初探

通过对羊毛湾水库蓄水运行过程与土坝变形及裂缝产生发展过程的分析 ,确认了坝下黄土台地浸水湿陷是导致坝体变形及裂缝产生和发展的根本原因 ,探讨了湿陷性黄土的非饱和湿陷、剩余湿陷和多次湿陷特性 ,及对该土坝现状和未来将造成的影响与应采取的除险加固措施     

金属体积成形过程的无网格RPIM方法分析

建立了基于无网格径向点插值RPIM法的二维体积成形动态显式计算模型.采用具有Delta函数性质的RPIM形函数构造位移域，因此可以很方便地施加本质边界条件.基于防御节点法给出了二维接触碰撞问题的接触力计算方法，避免罚函数法罚因子选择问题，以及拉格朗日乘子法不适合显式算法的问题.采用完全拉格朗日格式和弹塑性本构关系解决金属体积成形过程所涉及的几何非线性和材料非线性问题，并通过将工件变形分解为偏量部分和体积部分，有效消除金属体积成形中的体积自锁现象.数值算例表明，该算法可方便准确处理大变形畸变问题，是模拟金属体积成形过程的一种有效方法.     

Numerical simulation of deformations and forces of a floating fish cage collar in waves

The dynamic behavior of a fish cage collar in waves was investigated using a numerical model based on the finite element method. The floating collar and mooring system were divided into a series of line segments modeled by straight massless model segments with a node at each end. To verify the validity of the numerical model, research data from other authors were cited and compared with the simulated results, the comparison of results showed a good agreement. The numerical model was then applied to a dynamic simulation of a floating cage collar in waves to analyze its elastic deformation and mooring line tension. The simulated results indicated that the greatest deformation of the collar taken place in the position of the mooring line connection point when incident waves were in the same direction. An increase in the length of mooring line would help to decrease the mooring line tension of the collar. Furthermore, the effects of collar dimension, including collar circumference, pipe diameter in cross-section, and pipe thickness, on the dynamic behavior of the floating collar were discussed. The results of this study provided a better understanding of the dynamic behavior of the fish cage collar.     

低压热水锅炉修复工艺

分析了低压热水锅炉锅筒变形的原因,通过采用镶补焊接等措施使修复后的锅炉各项技术指标达到国家标准,满足了使用要求。     

基于P300高性能BCI打字机的研究与实现

利用Gleeble-3800数字控制热/力模拟试验机研究了Q690低碳微合金钢在变形温度850~1150 ℃，应变速率0.01~30 s-1条件下的高温单道次压缩变形行为.建立了基于动态材料模型(DMM)的加工图，结合OM观察变形体微观组织确定了该钢种的高温热变形机制.结果表明：应变量0.7及以下的加工图中包含2个峰区(1 000~1 120 ℃，0.01~0.37 s-1和1 100~1 150 ℃，3.16~30 s-1)和3个加工失稳区(850~900 ℃，0.01~0.32 s-1和850~900 ℃，10~30 s-1以及1 000~1 085 ℃，1~30 s-1).应变量超过0.8的加工图包含2个峰区(1 025~1 100 ℃，0.01~0.38 s-1和1 100~1 150 ℃，3~30 s-1)，失稳区为低温(850~900 ℃，0.01~30 s-1)以及应变速率1 s-1以上的中低温度(850~1 100 ℃)范围，在这两个峰区峰值点附近的热变形显微组织为均匀的完全动态再结晶组织，因此，这两个区域均适合Q690钢的热加工变形.     

Practical usefulness of a therapeutic soft contact lens for a corneal ulcer in a racehorse

Therapeutic soft contact lenses (TSCL) were applied to a thoroughbred racehorse with corneal ulcer refractory to topical medication. The insertion of the TSCL was conducted on day 36 using a nose twitch under sedation, auriculopalpebral nerve block, and topical anesthesia. The lens was retained, with the duration of wear lasting 114 days. Ocular pain improved immediately and fluorescein tests were negative 17 days after insertion. The horse was able to undergo training and ran in two races while wearing the TSCL. Thus a TSCL was found to be clinically useful for treating corneal ulcers in racehorses.     

哺乳期内猪母仔间行为联系的研究

选择经产东北民猪,长白猪各6头,与其仔猪一起作为研究对象,研究了不同猪种哺乳周期内母、仔间的行为联系。结果表明,随着产后日龄的增加,母、仔间接触的行为逐渐减弱,哺乳过程也发生了一系列行为变化。     

浅谈桥梁变形成因及观测方法

桥梁变形的原因有:自然条件及其变化、与桥梁本身相联的原因、人为设计及施工不合理.观测方法:大地测量方法、特殊的测量方法、摄影测量方法.     

有限元法钢丝滚道轴承接触问题研究

对钢丝滚道球轴承滚动体与钢丝滚道的点接触问题进行研究,由Hertz接触理论给出接触区的主要几何参数,应力极值以及接触体弹性趋近量的计算公式,并根据实际应用进行简化,计算出所研究轴承接触区的主要参数。在对钢丝滚道球轴承点接触理论分析的基础上,利用有限元法对钢丝滚道球轴承的接触问题进行仿真。对仿真的结果进行分析,并且与理论计算的结果和实际工作过程中的结果相比较,对其不同之处进行分析。     

高等级公路测量基准面的确定及长度变形分析

分析了高等级公路平面控制网导线边投影长度变形与测区平均高程及投影带宽度的关系．根据长度变形是否满足国家标准GB50026－93要求（≤2．5cm／1km）而确定坐标系统．给出了不同坐标系统之间的换算关系．文中算例表明：用简单算法能达到公路工程测量的精度要求．