祥云新松叶蜂种群动态研究

１９９２￣１９９５年对祥云新松叶蜂的种群动态进行了研究，结果分析表明，影响种群动态的主导因子是茧期死亡率，茧期死亡主要由天敌引起。由于祥云新松叶蜂幼虫具有驱赶天敌的利己激素，捕食性天敌昆虫对幼虫不能产生明显的控制作用。影响幼虫期死亡率的主要因子是温度。通过死亡率低海拔大于高海拔，同一海拔阴坡大于阳坡。由于祥云新松叶蜂危害云南松老叶，且对天敌抵抗力强，具有持续数年危害的特点。     

Effect of culling age of does on milk and meat production in Japanese-Saanen goats

A functional herd dynamics model was developed to estimate the effect of culling age on milk and meat production for Japanese-Saanen goats in relation to changes in prices of milk and meat. The model simulates life cycle production of bucks and does and their kids. Every production trait is first modelled as an individual trait and thereafter as a trait in the herd using a herd dynamics model. At the individual level, the survival curve function, the litter size function and the production traits function are combined. Data on growth and lactation were used to fit growth and lactation curves to estimated parameters using non-linear least squares regression technique and used in the production traits function. Using herd dynamics, the individual level functions are combined with the total number of animals function to estimate the total herd output and income efficiency at the herd level. Here, variables of culling days including the effect of difference in meat price value among goat categories (bucks, does, male kids and female kids) are used. Analysis of interrelations among the culling days of does, the price ratio and the income efficiency indicated that optimal culling days of does was shortened with an increase in the price ratio of meat to milk. However, when meat price value was different among goat categories according to actual situation of Japanese goat production, the optimal culling days of does could be fixed regardless of the change in price ratio and was calculated as 1730 days. This functional herd dynamics model can aid in decision-making regarding culling under several situations especially when there is a wide fluctuation in prices at local markets.     

松黄叶蜂的种群动态研究

研究了松黄叶蜂卵、幼虫在油松针叶上的数量变动规律和幼虫的种群动态 ;根据松黄叶蜂各虫期、虫态林间存活率和死亡率调查 ,推算出松黄叶蜂自然种群消减动态 ,提出了松黄叶蜂的防治对策     

Population dynamics and habitat connectivity affecting the spatial spread of populations – a simulation study

In this paper we show how the spatialconfiguration of habitat quality affects the spatial spread of apopulation in a heterogeneous environment. Our main result is thatfor species with limited dispersal ability and a landscape withisolated habitats, stepping stone patches of habitat greatlyincrease the ability of species to disperse. Our results showthat increasing reproductive rate first enables and thenaccelerates spatial spread, whereas increasing the connectivity has aremarkable effect only in case of low reproductive rates. Theimportance of landscape structure varied according to thedemographic characteristics of the population. To show this wepresent a spatially explicit habitat model taking into accountpopulation dynamics and habitat connectivity. The population dynamicsare based on a matrix projection model and are calculated on eachcell of a regular lattice. The parameters of the Leslie matrix dependon habitat suitability as well as density. Dispersal between adjacentcells takes place either unrestricted or with higher probability inthe direction of a higher habitat quality (restricted dispersal).Connectivity is maintained by corridors and stepping stones ofoptimal habitat quality in our fragmented model landscape containinga mosaic of different habitat suitabilities. The cellular automatonmodel serves as a basis for investigating different combinations ofparameter values and spatial arrangements of cells with high and lowquality.This revised version was published online in May 2005 with corrections to the Cover Date.     

4种杀虫剂灌根对设施甜瓜主要害虫种群动态的影响

以新甜瓜为试验材料,通过小区试验评价了25％噻虫嗪WG、70％吡虫啉WG、10％氟啶虫酰胺WG及50％氟啶虫胺腈WG各3000倍液灌根处理对设施大棚甜瓜瓜蚜、烟粉虱和朱砂叶螨种群动态的影响.结果表明:3种主要害虫的发生与作物季节有关,空白对照处理最高虫量分别为33.88、92.30和480.80头·株-1.噻虫嗪、吡虫...     

爬壁机器人翻越焊缝过程动力学建模研究

用于远洋渔船外板除锈的爬壁机器人在进行壁面作业时需要翻越焊缝,采用充气轮的爬壁机器人在翻越焊缝后会出现轮胎压缩量的减小,导致磁铁气隙增大、磁铁吸附力减小,从而削弱爬壁机器人的负载能力,降低了壁面行走可靠性,为此对爬壁机器人翻越焊缝的动力学过程进行研究。首先,将驱动轮轮胎简化为弹簧阻尼器,建立爬壁机器人翻越焊缝过程的动力学模型,并将驱动轮的翻越焊缝过程划分为不同的阶段;其次,利用数值方法求解该动力学模型,分析不同胎压下驱动轮翻越焊缝过程中爬壁机器人的运动状态;最后,进行了爬壁机器人翻越焊缝过程试验,结果表明,机器人翻越焊缝过程的试验结果与数值仿真结果基本一致,验证了本文所建动力学模型的正确性与合理性。     

长输管道水力瞬变仿真

根据各种管道边界的瞬变方程和管道水击的连锁Ａｌｌｉｅｖｉ方法，针对具有实际元器件和边界的长输管道的不稳定流动，设计了基于特征线差分解法的分析流程和仿真计算程序。利用长输管道水击数值计算所得线路上各节点的瞬态值进行Ｂ样条曲线拟合，实现了水力瞬变过程中线路水力坡降线及某些水力参数变化情况的图形输出 。     

预氧丝原位炭化无粘结剂C/C复合材料氧化动力学研究

采用恒温热重法测定了在空气中，０．１ＭＰａ，６７３Ｋ到９７３Ｋ下预氧丝（即预氧化聚丙烯腈纤维）原位炭化无粘结剂Ｃ／Ｃ复合的氧化失重率；并利用扫描电镜分析了这种复合材料氧化前后的结构，氧化动力学测定结果表明：该材料在氧化开始时，其氧化速率随时间的增长而增大，然后随时间的延长而减小，并趋向恒定，研究表明：该材料中预氧丝与基体炭界面结合处是空气中氧的扩散通道，杂质为空气中氧的吸附起到了有附活性中心的催化     

高功率激光系统中空间滤波器的程序编码

提出了建立大型激光装置的程序编码的初步方案及需要开展的计算机编码工作内容，并完成了空间滤波器系统的Ｆｏｕｒｉｅｒ编码模块，给出了计算图样 。