Season-specific varietal management as an option to increase rainfed lowland rice production in East African high altitude cropping systems

Due to land expansion and an increase in productivity, rice production in sub-Saharan Africa has been growing at a rate of 6% in the past decade. Rainfed rice production systems have accounted for a large share of this expansion. In these systems, the potential growing period not only depends on the length of the rainy season and thus water availability, but is often, especially in the highlands of East Africa, bordered by the onset of the cool period of the year, when low minimum temperatures compromise rice yields. The objective of this study was to investigate the yield potential of 30 rice varieties contrasting in crop duration and cold tolerance in the highlands of East Africa, with its limited length of growing period. A field trial was conducted in the cropping seasons in 2016 and 2017 at the Fogera rice research station, Ethiopia. As a function of the onset of rains, rice was sown mid-July in 2016 and early July in 2017. Early sowing in 2017 led to an extended crop duration and significantly lower yields of the short-duration varieties, and to a shortened duration and significantly higher yields of the medium- and long-duration varieties, when compared to late sowing in 2016. Late sowing compromised yield of the medium- and long-duration varieties because of low temperatures during booting stage, which led to high spikelet sterility. Early sowing resulted in low yields of the short-duration varieties, probably due to low solar radiation during the cloudy rainy season, which coincided with the vegetative stage. Therefore, choice of variety should be a function of the variable onset of the rainy season and related sowing date. However, crop models precisely calibrated for potential varieties and the respective environmental conditions could fully support the selection of a suitable variety, depending on the date of sowing, for example with the help of online tools or smartphone applications.     

不同加工处理方式对芝麻油风味的影响研究

以传统作坊式水代法芝麻油、传统作坊式压榨芝麻油、商品芝麻油为研究对象,采用顶空固相微萃取与气质联用技术（HS-SPME-GC/MS）和聚类分析对不同芝麻油挥发性化合物进行了检测和系统对比。结果表明：通过聚类分析,发现水代芝麻油和商品芝麻油的挥发性化合物组成相似程度更高;此外,芝麻油中吡嗪类化合物、含硫杂环化合物和苯系物因不同加工处理方式的差异显示出较大变化,其中3-乙基-2,5-二甲基吡嗪、4-甲基噻唑、愈创木酚等可作为区别三种芝麻油的关键风味物质。     

黑木耳功能性成分及其干燥技术研究进展

本文综述了黑木耳功能性成分以及干燥技术的研究进展,以期为黑木耳干燥技术的选取、应用和黑木耳产品开发的方向提供更多的参考。     

不同剥制机械对苎麻纤维产量及品质的影响

为明确不同纤维剥制机械对苎麻纤维产量和品质的影响,以苎麻品种‘中苎3号’为试验材料,研究了3种剥制机械（简易刮麻器、回拉式剥麻机、反拉式剥麻机）对原麻颜色、出麻率、单纤维强力和含胶量的影响。结果表明,不同机械剥制原麻产量与品质存在显著差异。3种机器剥制的原麻颜色均偏黄色,简易刮麻器剥制的麻纤维明度最亮,反拉式剥麻机剥制的原麻红色最深。简易刮麻器剥制麻与回拉式剥麻机剥制麻出麻率无显著差异,显著低于反拉式剥麻机剥制麻,但反拉式剥麻机出麻率较高,原因主要是总胶质含量显著较高（28.21%）。不同剥制机械所获原麻的单纤维强力也存在显著差异,由高到低依次为简易刮麻器＞回拉式剥麻机＞反拉式剥麻机。综上所述,简易刮麻器剥制原麻质量最好,回拉式剥麻机优于反拉式剥麻机。上述结果为苎麻剥麻机的选择提供理论依据。     

滴灌施肥对幼龄茶树生长和养分吸收的影响

通过田间试验,研究了龙井43、白叶1号品种茶园滴灌施肥对幼龄茶树生长、养分吸收、品质成分等的影响,分析了不同施肥模式下的施肥成本投入情况。结果表明,与常规开沟施肥相比,采用滴灌施肥后,即使在化肥减量25%的情况下,树高、主干直径、树幅都显著增加,修剪物生物量增加明显;茶树对养分的吸收量明显增加,而养分的渗漏损失明显减少,从而提高了养分利用效率。从滴灌施肥的次数上分析,龙井43品种,在试验条件下年施肥次数7次可以达到较好效果,而白叶1号品种,年施14次的效果较好。     

基于主成分分析的不同茶树品种在湖北地区的适应性评价

为客观准确地评价19个茶树品种在湖北地区的适应性。本研究以‘福鼎大白茶’（CK）为对照,对19个茶树品种在湖北地区的茶苗成活率、新梢物候期、产量性状、制茶品质和抗逆性等指标进行系统比较分析,并应用主成分分析法对不同茶树品种在湖北地区的适应性进行综合评价。结果表明,在主成分分析时前3个主成分的累积方差贡献率达到76.96%,分别为“产量抗性因子”“物候期因子”“品质因子”;以前3个主成分的线性回归方程和贡献率构建适应性综合评价模型,综合得分超过CK的有10个品种,其中‘茶农98’‘鄂茶12’‘陕茶1号’和‘岚里香’4个品种的综合评价得分明显高于其他品种,为最适宜湖北及相似茶区推广应用品种;综合得分低于CK的有9个品种,其中‘白叶一号’‘中黄1号’‘漕溪1号’和‘鸟王106’4个品种的综合得分明显低于其他品种,为不适宜湖北及相似茶区推广应用品种。     

不同限水条件下施肥方式对小麦产量构成因素的影响

为了提高水分和肥料的利用效率,2015~2016年进行了限水条件下施肥方式对产量构成因素影响的试验。结果表明:底施三元素复合肥+春季浇2水(拔节水+开花水)的产量最高;在相同水分或肥力条件下对穗数的影响较小,穗粒数、不孕小穗数随着水肥条件的不同变化较大,说明在小麦生产中水分和养分是制约小麦生产的主要因素。     

夏玉米产量时空变化及气候年型分析

定量分析夏玉米同一品种产量及产量构成要素时空变化,探讨造成产量时空差异的气候年型组合变化特征。基于2004～2013年夏玉米种植区郑单958多点田间试验数据分析表明,夏玉米区域平均产量为9 055 kg/hm~2,年际差为1 635 kg/hm~2,变幅为18.1%;地点差4 258 kg/hm~2,变幅为47.1%。夏玉米区域平均千粒重为313 g,年际变幅为13.1%;地点变幅为27.8%。夏玉米区域平均穗粒数为479,年际变幅为18.0%,地点变幅为38.7%。千粒重的增加导致夏玉米产量显著增加。穗粒数显著降低和时空差异大是造成产量波动和时空差异变幅大的主要原因。夏玉米产量和产量构成要素,低产点受各气候要素变化的影响显著;平产点受温度和日最高温度大于33℃的天数影响显著;高产点受降水影响显著。     

Response of industrial hemp to Salsola kali subsp. tragus densities under organic and conventional fertilisation

A 2-year field study was conducted to determine the effects of different nutrition systems and Salsola kali subsp. tragus densities on industrial hemp yield and its components. Experiments were conducted as a split plot in a randomised complete block design with three replicates. Factors were fertilisation (poultry manure, vermicompost and nitrogen fertiliser) as the main plot and weed density (0, 5, 10, 15 and 20 plants/m²) as the subplot. Results indicated that the maximum number of racemes per plant, seeds per raceme, 1000-seed weight, biomass, grain yield and harvest index (HI) of industrial hemp were obtained using vermicompost and were reduced with nitrogen fertiliser application. All measured properties in hemp plants decreased due to increasing S. kali subsp. tragus density, especially at 15 and 20 plants/m². The most significant reduction in hemp grain yield and its components was observed by increasing weed density with the application of nitrogen fertiliser. The application of vermicompost at high weed densities resulted in greater hemp grain yield and its components compared with nitrogen fertiliser. It is recommended to apply organic fertilisers, especially vermicompost at high S. kali subsp. tragus densities.     

CCA木材防腐剂活性成分检测方法比较试验

文章介绍了CCA木材防腐药剂中CuO、CrO3、As2O5等活性成分的常规化学分析方法,并与仪器分析方法进行了比较。结果表明,常规化学分析与仪器分析的结果相接近,两者之间的偏差很小,不需做修正便可应用于工业生产上。