Improvement of Appearance Traits of elite Rice Zhenshan 97B by Molecular Introgression of Targeted about 800 kb Interval from Indica Rice Jiafuzhan Genome

Rice appearance trait is mainly mean grain length (GL), grain width (GW), ratio of length and width (L/W), chalkiness (CH) and transparence (TR). Appearance is the first impression, and rice appearance traits effect significantly the value of commodity. Hybrid rice is relatively low quality, especially on rice appearance quality,which restricts partially its extend and badly export of hybrid seed and rice in China.Shanyou 63, the most famous hybrid rice combination of China, could not be also sustainable application because of its poor qualities. In this studies, We attempt to improve appearance quality of the elite rice maintainer of Zhenshan 97B by using molecular approach of genomic interval targeted introgression. Three F2 populations were constructed to study the classical and molecular genetic of rice appearance traits, at the same time, molecular marker-asisted toimprove the main maintainer line, Zhenshan 97B were performed. There some following results:Three F2 populations were constructed based on crosses of Guangluai 4×Jiafuzhan (GJ popu.), Minghui 86×Jiafuzhan (MJ popu.) and Zhenshan 97B×Jiafuzhan (ZJ popu.). ZJ popu and GJ popu were produced to reconstruct the linkage maps related with rice appearance traits based on BSA, and detect QTL of target traits based on IM.In ZJ popu, 9 QTLs of target traits were detected. The interval, RM169～RM516 on Chromosome 5, was genetic locus of GW, L/W, CH and BW, and the explained variances were 10.9%, 14.9%, 12.0% and 14.2%, respectively.RM214 on chromosome 7, RM339 on chromosome 8 were genetic loci if CH and BW, and the explained variances were 9.4%, 10.0%, 11.0% and 12.1%. besides there is a genetic locus, RM347, of G/W on chromosome 3, and the explained varance was 10.3%. In GJ popu, 5 QTLs of rice appearance traits were detected. The interval, RM169-RM516 on Chromosome 5, were also the genetic loci of GW, CH and BW, and the explained variances were 9.0%, 12.5%, and 13.6%, respectively. RM264～RM80 on chromosome 8 was the genetic loci of GW amd L/W,and the explained variances were 14.7% and 13.4%. The genotypes of all QTLs, except RM214, from Jiafuzhan contributed to improving riee appearance traits.The research was to improve the rice appearance quality of Zhenshan 97B by introgressing QTLs of rice appearance traits from Jiafuzhan, a donor parent, by means of MAS in the process of recurrent backcrossing, 4 SSR markers were used to detect the target genotypes from donor parent, and 70 SSR primers to identify the genetic background of recurrent parent. Consequently, there were 19 target individuals in BC3, in which the mean value of GL, GW, L/W, CH and BW were 6.06±0.04mm, 2.50±0.02mm, 2.43±0.02, 29.5±2.7 and 29.4±2.7%, respectively,and the mean homologous degree (HD) to recurrent parent is up to 98.22%. Compared to Zhenshan 97B, GL, CH and BW decreased 0.17 mm, 34.9% and 34.5% respectively and however L/W increased 0.19. which accounted separately for 25.37%, 54.79%, 54.57% and 10.50% of thedifference of every trait between two parents. It is very luckly to find a individual, 13BC2-3BC3 line, whose GL, GW, G/W, CH and BW were 6.04 mm, 2.43 mm, 2.49,2.5% and 2.5% separately, There is very important signification for it to be used in hybrid rice breeding improving appearance traits. In the research, MAS efficiency of 3 loci (with 4 markers ) was 5.68% and coincident degree was 73.08%.     

基于SD-SVD-Burg的玉米叶片铜铅污染甄别与程度诊断

为研究一种快速甄别作物受重金属污染的元素类别和所受污染程度的方法,于2017年设置不同梯度铜(Cu)、铅(Pb)胁迫下的玉米盆栽实验,对玉米的紫谷、绿峰和红边3个光谱特征区间的高光谱数据进行光谱一阶微分和奇异值分解处理,并结合Burg算法绘制功率谱密度曲线,同时利用2014年采集的光谱数据作为验证组检验该模型的稳定性。结果表明:健康玉米叶片与不同浓度Cu、Pb胁迫下玉米叶片光谱信号的功率谱密度曲线的波峰数及波峰坡度均不相同。功率谱曲线平均功率和玉米叶片中Cu、Pb含量的相关系数最高可达0.9958,证明该方法在对玉米进行污染元素种类辨别和污染程度诊断方面具有可行性,不同年份Cu与Pb胁迫下绿峰功率谱曲线平均功率与玉米叶片中Cu、Pb含量的相关系数分别为0.9213和0.9915,进一步验证该算法在玉米Cu、Pb污染诊断方面具有稳定性与普适性。     

精准农业中不同取样间距下Kriging插值精度对比研究

为了研究土壤不同养分的合理取样间距,研究选择了平顶山地区典型烟田为研究对象,在面积为4 hm2的地块上以20 m×20 m网格采样,共采集耕层(0~20 cm)土壤样品111个。在GIS软件平台上对采样点进行行列删除,人为改变取样间距大小,并运用地质统计学和普通克里格插值方法进行插值,生成了土壤各养分分布图。同时,随机选取7个样点,并将其在不同取样密度下的Kriging插值结果与实测值进行比较。由插值误差分析、独立检验、面积分析和养分分布图可以看出:在该研究区域内,碱解氮、速效磷、速效钾、速效铁和速效锌以20 m取样间距较为合适,有机质和速效铜的合理取样间距为60 m,速效锰则以40 m取样间距较适宜。研究目的是为该地区确定合理的土壤取样间距提供理论依据。     

农用电动汽车动力系统参数匹配优化及动力性验证

根据纯电动汽车性能的设计指标,对农用电动汽车的电动机、电池组及传动比等动力系统参数进行了合理匹配与优化设计.采用区间优化方法对减速器速比进行了优化设计,在满足电动汽车动力性能要求的前提下,以设计变量的最大可行区间代替其传统的确定性最优值,解决了传动系统齿轮的配齿问题.由优化设计结果,使用ADVISOR软件对整车动力性能进行了仿真分析,并对仿真结果进行了实验验证.     

监测采样间隔对作物模型性能的影响研究

为了获得不同监测采样间隔对作物生长模型的影响规律,避免现有研究和应用中存在的主观性或随意性,以番茄叶片蒸腾速率和CO2交换率为对象,采用3 种采样间隔数据及2 种常用方法进行建模、预测和比较研究。研究结果显示,在15、30、60 min的监测采样间隔下,番茄叶片蒸腾速率模型和CO2交换率模型的预测误差是不同的,GA-BP神经网络模型的预测能力普遍优于纯二次回归模型,但两者的结论是一致的,即对蒸腾速率和CO2交换率而言,最合适的监测采样间隔分别为30 min和15 min。本研究结果为监测采样间隔的设定、试验数据的选取和建模方法的运用提供依据,对作物模型研究和应用具有重要意义。     

浮动平底推杆等宽凸轮机构第Ⅱ类机构综合问题

以浮动平底推杆等宽凸轮机构为研究对象,通过引入往程、返程、向径标定线和等宽映射区间套等概念,阐述了往程/返程运动角、远近休止角的内在规律性关系,运动学尺寸、行程幅值和初位参数间的内在特征关系,输出摇杆返程角位移规律的求解,主副平底容许选择区段和凸轮基圆半径取值域确定,凸轮基圆半径、压力角和宽度的变化规律等,揭示了等宽凸轮机构的设计蕴含着诸多的异质性内涵。还对等宽凸轮机构、共轭凸轮机构进行了比较,得到了两种形锁合机构相同点、差异点。最后给出等宽凸轮机构的一个综合算例。     

生菜叶中磷含量的光谱定量分析

为快速、准确检测生菜叶内的磷含量,提出了应用光谱技术结合化学计量法无损检测生菜叶内磷含量的方法。通过获取不同施磷量下生菜叶片于波长350~2500nm处的反射光谱,对光谱数据进行5点平滑和一阶导数变换后,利用联合区间偏最小二乘算法（siPLS）提取了与生菜叶磷元素相关的4个特征波段,即950~1070nm, 1430~1549nm,1906~2025nm和2144~2263nm。进一步利用连续投影算法（SPA）对全光谱波段和4个特征波段进行特征波长提取,分别筛选出变量63个和25个。分别对4个特征波段、63个和25个特征波长进行主成分降〖JP2〗维,当主成分数分别为7、5和4时,隐含层神经元数分别为7、5和3时,建立了siPLS+BPANN,SPA+BPANN,siPLS+〖JP〗SPA+BPANN生菜叶磷含量检测模型。研究结果表明：siPLS+SPA+BPANN模型的预测结果优于其他模型,验证集相关系数为0.911,验证均方根误差为479mg/kg。     

模拟降雨格局变化对虎尾草分株和根系特征的影响

作为全球气候变化的重要组成部分,降雨格局变化能够对各类植物产生不同的影响.虎尾草为退化盐碱草地恢复的主要先锋种植物之一,降雨格局变化如何影响其分株和根系等特征对于全球变化背景下退化盐碱地的生态恢复至关重要.本研究通过人工模拟降雨格局变化试验,设置了3个降水量(减少30％、不变、增加30％)和2个降雨间隔(1、2d),研...     

滴灌下氮盐交互对加工番茄荧光特性及产量品质的影响

【目的】新疆有着全中国最大面积的盐碱地和加工番茄的种植基地。在新疆开展两年试验以研究加工番茄在氮盐交互下生长、生理、产量和品质的变化规律,获得适宜新疆盐碱地种植加工番茄的合理施氮量和土壤盐分范围,为新疆扩大加工番茄种植面积和合理施氮提供科学的理论依据及技术途径。【方法】试验于2017和2018年在石河子大学现代节水灌溉兵团重点实验基地进行,以当地主栽品种3166为试验材料,2017年试验共设置4个土壤含盐量水平：1.5、4.0、7.0和10.0 g·kg ^-1及4个氮素水平：201、166、131和96 kg·hm ^-2,2018年在2017年的基础上去除10.0 g·kg ^-1的土壤含盐量,增加5.0 g·kg ^-1的土壤含盐量和不施氮量处理。试验测定和分析加工番茄的荧光叶绿素参数、产量和品质指标。【结果】在氮盐交互下,加工番茄荧光参数及产量等指标均呈现出复杂的变化规律。绝大多数的荧光参数及产量受土壤盐分的主导作用较氮素强,在同等氮素水平下,7.0 g·kg ^-1和10.0 g·kg ^-1的土壤盐分对加工番茄荧光指标抑制程度最大;低盐分水平下,166 kg·hm ^-2的中等偏高的施氮量对加工番茄的荧光指标促进作用最大,其次是施氮201 kg·hm ^-2的处理;在中等偏高的盐分水平下,96 kg·hm ^-2的低氮对加工番茄的最好,其次为不施氮水平。加工番茄的鲜果产量总体上符合“盐高产低”的规律,但低氮高盐处理的产量明显高于其他同盐度的氮素水平下的产量。可溶性固形物、VC、可溶性糖和可滴定酸均随着土壤含盐量的增大逐渐增大,糖酸比的最大值均出现在低盐处理,盐分对加工番茄品质的影响远高于氮素,二者交互对加工番茄的品质并无显著性影响。通过图形叠加分析方法,得出了加工番茄获得相对最优产量和品质的合理施氮范围和土壤含盐量区间。【结论】在盐碱程度偏高的土壤可通过少施氮素来提高加工番茄产量;加工番茄获得相对最优产量和品质的合理施氮范围和土壤含盐量区间为N：98.12—119.60 kg·hm ^-2,S：3.57—5.58 g·kg ^-1。     

花期前后高温对玉米花粉发育及结实率的影响

为明确花期不同梯度高温对玉米开花特性和花粉活力的影响,以热敏感基因型玉米品种‘驻玉309’为试验材料,于花期(吐丝前8d～吐丝后8d)进行不同程度高温(31、34和37℃)处理,测定受精结实率、雄穗性状、开花时间、花粉活力及花粉超显微结构,分析生育期前后的高温对受精结实、开花特性及花粉活力的影响。结果表明,花期高温胁迫显著降低玉米受精结实率,对抽雄吐丝间隔期无显著影响,但盛花期提前;极端高温则导致玉米抽雄期显著提前、开花期和盛花期延后,抽雄吐丝间隔期延长;花期高温使花粉粒形态皱缩、萌发孔内陷,显著降低花粉活力,且温度越高,花粉活力降低幅度越大。因此,花期前后高温通过影响玉米影响雄穗开花特性、延长抽雄吐丝间隔期、影响花粉粒形态、降低花粉活力,从而降低玉米的小花受精率和籽粒结实率。