基于Modelica语言建模的柴油机稳动态性能仿真与试验

针对传统柴油机建模效率不高、所建模型抽象不易理解、软件平台开放程度差、模型通用性低的问题,采用多领域统一物理建模规范Modelica语言和面向对象的建模思想建立了柴油机的仿真模型。以上柴D4114B型发电用柴油机为例,在解决上述问题的同时模拟了负荷特性下柴油机的稳态过程,最高压力、排温等稳态数据点的实测值与仿真值的最大相对误差为8.9%,证明了所建立的柴油机模型具有较好的稳态性能。在此基础上进行了动态仿真,模拟了转速、单缸循环油量等参数的动态变化规律,并将部分参数的仿真值与实测值进行比较,两者吻合得比较好,证明了所建立的柴油机模型能较好地预测其动态性能,可为后续的基于Modelica语言的柴油机建模提供参考。     

基于无线传感器网络的奶牛行为特征监测系统设计

奶牛等大型动物的疾病和发情状况目前主要依赖饲养员目测判断,大规模集约化养殖仍采用人工观测方法,这不仅带来繁重的人力负担,也容易误判。为了能自动准确地识别奶牛是否发情或生病,该文提出在奶牛颈部安装无线传感器节点,通过各种传感器获取奶牛的体温、呼吸频率和运动加速度等参数,采用K-均值聚类算法对提取的各种参数进行行为特征多级分类识别,以此建立的动物行为监测系统能准确区分奶牛静止、慢走、爬跨等行为特征,从而可以长时间监测奶牛的健康状态。而且,这种监测系统易于推广到对其他动物的监测,对促进养殖业和畜牧业的发展也具有指导意义。     

The use of lysimeter data for the test of two soil–water balance models: A case study

Two soil–water balance models were tested by a comparison of simulated with measured daily rates of actual evapotranspiration, soil water storage, groundwater recharge, and capillary rise. These rates were obtained from twelve weighable lysimeters with three different soils and two different lower boundary conditions for the time period from January 1, 1996 to December 31, 1998. In that period, grass vegetation was grown on all lysimeters. These lysimeters are located in Berlin‐Dahlem, Germany. One model calculated the soil water balance using the Richards equation. The other one used a capacitance approach. Both models used the same modified Penman formula for the estimation of potential evapotranspiration and the same simple empirical vegetation model for the calculation of transpiration, interception, and evaporation. The comparisons of simulated with measured model outputs were analyzed using the modeling‐efficiency index IA and the root mean squared error RMSE. At some lysimeters, the uncalibrated application of both models led to an underestimation of cumulative and annual rates of groundwater recharge and capillary rise, despite a good simulation quality in terms of IA and RMSE. A calibration of soil‐hydraulic and vegetation parameters such as maximum rooting depth resulted in a better fit between simulated and observed cumulative and annual rates of groundwater recharge and capillary rise, but in some cases also decreased the simulation quality of both models in terms of IA and RMSE. The results of this calibration indicated that, in addition to a precise determination of the soil water‐retention functions, vegetation parameters such as rooting depth should also be observed. Without such information, the rooting depth is a calibration parameter. However, in some cases, the uncalibrated application of both models also led to an acceptable fit between measured and simulated model outputs.     

DEM栅格分辨率对多元线性土壤—景观模型及其制图应用的影响

以亚热带丘陵地区为对象,以该区4 km×3 km的5 m、10 m、15 m、20 m、25 m、30 m数字高程模型(DEM)为基础,建立多元线性土壤景观模型,并应用该模型预测研究区内土壤表层有机质含量分布,进而比较不同分辨率DEM中土壤景观模型及其预测制图的精度。结果表明:在本研究区11 km2范围内,随着DEM栅格分辨率降低,坡度、曲率、比汇水面积(对数)频度均表现出了向其中值区集中的趋势;地形因子的这一变化规律对土壤景观模型的影响较小,例如模型的变量、变量系数及R2在不同分辨率DEM中的差异很小;但地形因子的这一变化规律对模型预测制图的精度具有较大影响,各项指标均说明,模型在10~25 m DEM中的制图精度较高,而在更高分辨率(5 m)或更低分辨率(30 m)DEM中较低。本研究结果对其他亚热带丘陵地区具有一定的指示意义。     

All-around 3D plant modeling system using multiple images and its composition

In this study, we developed an all-around 3D plant modeling system that operates using images and is capable of measuring plants non-destructively without any contact. During the fabrication of this device, we selected a method capable of performing 3D model reconstruction from multiple images. We then developed an improved SfM-MVS (Structure from Motion / Multi-View-Stereo) method that enables 3D reconstruction by simply capturing images with a camera. The resulting image-based method offers a high degree of freedom because the hardware and software can comprise commercially available products, and it permits the use of one or more cameras according to the shape and size of the plant. The advantages of the image-based method are that 3D reconstruction can be conducted at any time as long as the images are already taken, and that the desired locations can be observed, measured, and analyzed from 2D images and a 3D point cloud. The device we developed is capable of 3D measurements and modeling of plants from a few millimeters to 2.4 m of height using this method. This article explains this device, the principles of its composition, and the accuracy of the models obtained from it.     

3D modeling and reconstruction of plants and trees: A cross-cutting review across computer graphics,vision, and plant phenotyping

This paper reviews the past and current trends of three-dimensional (3D) modeling and reconstruction of plants and trees. These topics have been studied in multiple research fields, including computer vision, graphics, plant phenotyping, and forestry. This paper, therefore, provides a cross-cutting review. Representations of plant shape and structure are first summarized, where every method for plant modeling and reconstruction is based on a shape/structure representation. The methods were then categorized into 1) creating non-existent plants (modeling) and 2) creating models from real-world plants (reconstruction). This paper also discusses the limitations of current methods and possible future directions.     

海南海花岛软基处理工程中真空预压法的改进与机理分析

疏浚淤泥这种超软土地基目前主要采用排水固结法进行加固,然而,工程实践发现,淤堵是一个重要的问题,新型防淤堵材料和施工工艺是研究的热点。依托恒大海南海花岛真空预压处理工程,引入一种应用于超软土地基处理的新型防淤堵真空预压法。该方法是直排式真空预压方法的进一步改进,将防淤堵排水板取代传统排水板,在连接方式上,将无孔钢丝软管取代了水平波纹管,也将传统的包扎捆绑改进成了三通密封接头,枪钉固定。结合施工动态监测和加固后检测,表明了该方法的加固效果和实用性。在此基础上,结合已有的室内模型试验研究,阐述其抽真空过程中在排水板附近防淤堵的原理和改善机制。     

双吸三元扭曲叶片离心泵的造型

双吸三元扭曲叶片离心泵具有叶片形状复杂与多流道等特征,其三维造型涉及问题较多,在泵的三维造型中具有普遍性.为此,以GAMBIT软件为设计平台,结合一个具体的双吸离心泵的造型实例,介绍了双吸离心泵扭曲叶片叶轮和螺旋形蜗壳等部件三维造型的方法,并给出了创建实体模型的详细步骤及三维模型图;此外,还简要说明了在Gambit软件中建模需要注意的问题.     

拖拉机液压悬挂装置的建模及仿真分析

分析了拖拉机液压悬挂装置的组成及工作原理,建立了系统的数学模型;并应用MATLAB软件对系统进行了稳定性分析和仿真,效果良好.建模仿真技术是研究机组系统整体的最佳设计(匹配)、最佳使用和提高机组效益的有效途径,为解决拖拉机机组系统分析与综合有效途径提供了参考依据.     

基于UG平台的直齿圆锥齿轮的三维精确建模

直齿圆锥齿轮是现代机械中应用最为广泛的一种传动机构。它可以用来传递空间两轴之间的运动和动力，而且传动准确、平稳、机械效率高。为此，介绍了一个在UG平台上建立直齿圆锥齿轮三维模型的新方法，该方法符合《机械原理》一书对直齿圆锥齿轮齿廓线的定义．实现了精确建模的目的。最后通过一个简单的实例。进一步阐明了该方法的实现过程。