羧基丁苯胶乳改性脲醛树脂胶粘剂的研究

利用羧基丁苯胶乳对脲醛树脂胶粘剂进行改性,同时在脲醛树脂合成过程中加入一定数量的玉米淀粉等改性剂,进一步提高改性脲醛树脂的综合性能,降低生产成本。羧基丁苯胶乳改性脲醛树脂胶粘剂具有游离甲醛含量低、生产工艺简单等特点,生产出的胶合板的胶合强度和甲醛释放量均满足国家标准。     

Multiple resistance of Papaver rhoeas L. to 2,4‐D and acetolactate synthase inhibitors in four European countries

The issue of cross‐ or multiple resistance to acetolactate synthase (ALS) inhibitors and the auxinic herbicide 2,4‐D was investigated in Papaver rhoeas L., a common and troublesome weed in winter cereals, in a broad‐scale study across four European countries. A combination of herbicide sensitivity bioassays and molecular assays targeting mutations involved in resistance was conducted on 27 populations of P. rhoeas originating from Greece (9), Italy (5), France (10) and Spain (3). Plants resistant to the field rate of 2,4‐D were observed in 25 of the 27 populations assayed, in frequencies ranging from 5% to 85%. Plants resistant to ALS‐inhibiting herbicides (sulfonylureas) were present in 24 of the 27 populations, in frequencies ranging from 4% to 100%. Plants resistant to 2,4‐D co‐occurred with plants resistant to sulfonylureas in 23 populations. In four of these, the probability of presence of plants with cross‐ or multiple resistance to 2,4‐D and sulfonylureas was higher than 0.5. ALS genotyping of plants from the field populations or of their progenies, identified ALS alleles carrying a mutation at codon Pro197 or Trp574 in 2,4‐D‐sensitive and in 2,4‐D‐resistant plants. The latter case confirmed multiple resistance to 2,4‐D and ALS inhibitors at the level of individual plants in all four countries investigated. This study is the first to identify individual plants with multiple resistance in P. rhoeas, an attribute rarely assessed in other weed species, but one with significant implications in designing chemical control strategies.     

All-around 3D plant modeling system using multiple images and its composition

In this study, we developed an all-around 3D plant modeling system that operates using images and is capable of measuring plants non-destructively without any contact. During the fabrication of this device, we selected a method capable of performing 3D model reconstruction from multiple images. We then developed an improved SfM-MVS (Structure from Motion / Multi-View-Stereo) method that enables 3D reconstruction by simply capturing images with a camera. The resulting image-based method offers a high degree of freedom because the hardware and software can comprise commercially available products, and it permits the use of one or more cameras according to the shape and size of the plant. The advantages of the image-based method are that 3D reconstruction can be conducted at any time as long as the images are already taken, and that the desired locations can be observed, measured, and analyzed from 2D images and a 3D point cloud. The device we developed is capable of 3D measurements and modeling of plants from a few millimeters to 2.4 m of height using this method. This article explains this device, the principles of its composition, and the accuracy of the models obtained from it.     

3D modeling and reconstruction of plants and trees: A cross-cutting review across computer graphics,vision, and plant phenotyping

This paper reviews the past and current trends of three-dimensional (3D) modeling and reconstruction of plants and trees. These topics have been studied in multiple research fields, including computer vision, graphics, plant phenotyping, and forestry. This paper, therefore, provides a cross-cutting review. Representations of plant shape and structure are first summarized, where every method for plant modeling and reconstruction is based on a shape/structure representation. The methods were then categorized into 1) creating non-existent plants (modeling) and 2) creating models from real-world plants (reconstruction). This paper also discusses the limitations of current methods and possible future directions.     

饲料中添加不同水平的维生素D_3对草鱼幼鱼生长和体成分的影响

本文以酪蛋白和脱脂豆粕为蛋白源,糊精为糖源,玉米油和豆油为脂肪源的半纯化饲料为基础饲料,研究维生素D3对草鱼(Ctenopharyngodon idellus)幼鱼生长及体成分的影响。维生素D3共设0,100,200,500,1000,2000,3000 IU/kg 7个添加梯度,每一梯度设3个重复,每个重复放养60尾初始体质量(3.86±0.34)g的草鱼,在(26.9±3)℃的流水系统中养殖8周。结果显示:维生素D3对草鱼幼鱼增重率、特定生长率、饲料系数、存活率、体水分、粗蛋白质、粗脂肪含量和血清钙浓度没有显著性影响(P>0.05);对照组和添加100 IU/kg维生素D3的试验组中,草鱼幼鱼的粗灰分显著低于其它试验组(P<0.05);与对照组相比,饲料中添加维生素D3对全鱼钙磷含量、血清磷离子浓度以及碱性磷酸酶活性影响显著(P<0.05)。根据维生素D3对全鱼钙磷含量的影响,草鱼幼鱼饲料中维生素D3适宜的添加量为1000 IU/kg。     

Plasma levels of vitamin D3 metabolites during parr-smolt transformation of Atlantic salmon Salmo salar L.

Plasma vitamin D and vitamin D metabolites were measured in Atlantic salmon parr during smoltification and after transfer to seawater. The fish were fed commercial feed for 5 months under natural light, and Na⁺/K⁺ ATPase was measured as an indicator of the smoltification status. No significant differences were recorded in the level of plasma vitamin D metabolites. However, a tendency of increasing plasma concentration of 25OHD₃ and also a temporary increase in plasma 1,25(OH)₂D₃ and 24,25(OH)₂D₃ were recorded prior to seawater transfer. The minor changes in plasma levels of the metabolites indicate a role of the vitamin D metabolites during parr–smolt transformation, although we do not know whether the increased levels are caused by increased synthesis of the metabolites or by decreased binding to receptors or decreased excretion.     

基于网络的交互式发动机零部件模型虚拟展示

通过Pro/E建立三维模型,再通过3DS MAX,Cult3D等软件,进行发动机零部件的交互制作,最后将交互模型发布在网页上,有利于提高教学效果。     

植株自旋转多视角重建技术在小麦植株三维表型获取中的应用评估

基于多视角重建技术的作物三维表型高通量获取系统成本低、获取效率高,引起越来越多的关注。植物自旋转式拍摄平台易于搭建,但植物旋转过程中产生的抖动对点云三维重建和表型解析精度有一定影响。为评估旋转式多视角成像在小麦植株三维表型解析中的适用性,基于植物旋转设计了便携式小麦植株三维表型高通量采集系统,选取穗期不同品种的小麦植株作为实验样本进行点云重建,基于Hausdorff距离评价了重建点云的精度误差;并基于人工测量数据,对所提取的表型指标精度进行评价。结果表明,植物旋转式重建的点云与相机旋转式重建的点云有较高的一致性,点云精度差距基本控制在0.4 cm以下;获取的叶长、叶宽和株高的均根方误差分别为0.79、0.13和0.53 cm,平均绝对百分比误差分别为3.26%、7.63%和0.74%,表明该方式适合穗期的小麦植株表型重建,具有较高的点云重建和表型提取精度,并为小麦植株表型评价提供了一种低成本的解决方案。     

基于轮廓投影的盆栽水稻三维重建方法研究

近几年,基于图像的高通量水稻表型研究取得了极大进展,但从三维层面进行研究的工作则相对较少。一般而言,相对于二维图像,从三维模型中能提取更为全面的性状参数。三维模型重建是作物三维表型研究的基础,提出一种适用于盆栽水稻三维点云的重建方法。该方法在相机固定、样本旋转的拍摄模式下获取水稻多视角图像,根据相机标定参数以及水稻轮廓二值图,通过轮廓投影方法重建水稻三维可视外壳点云模型,并通过反投影方法进行点云着色。结果表明,该方法对于不同时期及不同品种的水稻样本均能取得较好重建效果。