履带板用高锰钢强韧化研究

本文根据履带板的失效特征和机理,提出了高锰钢的铬、钼再合金化,稀土、钛变质处理和重结晶热处理工艺综合强韧化方案.经实验证实,综合机械性能显著改善.     

苹果的3种优良砧木

介绍了“B9”、“CG80”、“75-7-1”三种苹果矮化钻木，并以生产上应用较多的M26作为对照，研究了其矮化程度、早果性、嫁接亲和力、树体产量等性状。     

几种绵羊常用粗饲料GI的测定及其代谢能模型化研究

在测定5类9种粗饲料及3个混合粗饲料的常规成分基础上,实测了它们的粗饲料分级指数(GI):大青山草地早熟禾3.4758、沙打旺3.3731、苜蓿1.7202、混粗C21.1797、青干草1.1029、混粗C10.7852、羊草0.5684、玉米青贮0.4152、玉米秸0.1985、谷草0.1728、混粗D0.0805、苏丹草0.0687,并就GI与饲料相对值(RFV)对粗饲料品质的分级进行了比较,表明GI要优于RFV,同时证明:GI还可以用于混合粗饲料的优化与牧草刈割期的确定。研究并建立了预测粗饲料代谢能(ME)的模型:ME(MJ/kg)=-11.7492 0.5959IVDM(D%)-0.0044[IVDM(D%)]2,其中IVDMD为体外干物质消化率。     

Food intake and energy expenditure in growing cats with and without a predisposition to overweight

Overweight and obesity are multifactorial diseases caused by an imbalance in energy metabolism. An underlying genetic predisposition is often a factor in these conditions. In the cat breeding family of the Institute of Animal Nutrition at the Vetsuisse Faculty, University of Zurich, a segregating overweight phenotype with a genetic contribution was observed. From this breeding family, 26 kittens were followed from birth up to 8 months of age. During this time, food intake was measured using an automatic feeding station, and energy expenditure was investigated using indirect calorimetry at the ages of 4 and 6 months. Dual‐energy X‐ray absorptiometry (DEXA) was performed and blood glucose, leptin and insulin were measured at the ages of 4, 6 and 8 months. The kittens were also weighed daily for the first 2 weeks of life, every second day until weaning and once per week until 8 months of age. The body condition score (BCS) was evaluated monthly between 2 and 8 months of age. The main finding of this study is that a predisposition to overweight is connected to a higher food intake early in life, with no significant alterations in energy expenditure. The leptin blood levels were related to body fat percentage, and insulin sensitivity did not seem to be affected.     

X射线荧光光谱法快速测定稻谷中的镉

探索了一种对稻谷中重金属镉的快速、直接的测定方法,以适用稻谷集中收购、存储和流通过程中快速检测的的需要。样品无需前处理,直接磨成粉状即可上机测定。该方法采用X射线荧光光谱分析的原理,样品中的待测元素受激产生特征X射线,并由高性能探测器接收,得到镉元素的信号强度,然后根据信号强度与浓度的比例关系,经过软件处理自动计算样品中镉的含量,20min内完成精确定量。检出限可达到0.034mg/kg,实物标样标准偏差为0.016。此方法简单快速,并且准确性高,重现性好,可广泛应用于稻谷中镉的快速检测。     

Pedotransfer functions to assess adsorbed phosphate using iron oxide content and magnetic susceptibility in an Oxisol

Adsorbed phosphate in soils can be chemically extracted; however, this process is both time‐consuming and not cost‐effective if large numbers of samples have to be analysed. Indirect assessment of adsorbed phosphate by pedotransfer functions (PTFs) can help optimize fertilizer strategies. This study aimed to evaluate the spatial variability of adsorbed phosphate (P_ads), iron oxides and magnetic susceptibility (MS) in oxisols and to calibrate PTFs to predict P_ads. A total of 308 soil samples were collected from Hapludox and Eutrudox soils formed from sandstone in Brazil. The contents of clay (196–607 g/kg), iron oxides (40–165 g/kg), MS (1.2–29 × 10^?6 m³/kg) and P_ads (327–842 mg/kg) were in the range of typical values for these highly weathered soils. This study showed that the attributes studied were spatially dependent. Geomorphic surfaces enabled understanding of spatial variability and helped to develop a more efficient sampling scheme to calibrate PTFs. Moreover, the adsorbed phosphate in these oxisols could be predicted by a PTF using iron oxides and MS as predictors. The MS attribute enabled the most accurate prediction (concordance coefficient = 0.95, root‐mean‐square error = 46 mg/kg and relative improvement in root‐mean‐square error = ?4.12) of spatial variability through PTF compared to other predictors.     

秃杉大径级用材林抚育采伐技术的研究

结合国家林业行业标准《秃杉速生丰产林》编制的要点,对秃杉大径级用材林抚育采伐进行了专项调查和研究;结合具体实际培育过程,有的放矢地提出了培育目标、分区生长指标以及抚育采伐的原则、对象和范围,为秃杉大径级用材林的培育提供了技术保障。     

轻钢结构抗震节能体系在“塞上农民新居”中的应用

针对宁夏地区农民传统住宅抗震性差，建筑外围护结构保温性能差，采暖系统能源消耗量大，环境污染严重等问题，提出采用轻钢结构配以轻质保温板材的轻钢结构抗震节能体系，以期为宁夏农村住宅设计提供指导性建议。     

冷冲高硬度材料模具失效的原因与对策研究

在日常的应用中,我们发现,制作材料是高合金钢的模具要比硬质合金制作的模具耐用,我们进而研究了其失效的方式以及失效的比例,研究结果显示,硬质合金的失效主要体现在掉渣和崩刃,而高合金钢的失效主要体现在正常的磨损方面。在制作的过程中,高合金钢会由于在加热的不适当而使得碳化物不均匀,或者使得硬度不稳定等原因而没有充分发挥材料的潜在能力,文章对如何提高高合金钢的寿命提出了具体方案。