感应热处理工艺对拖拉机轴类零件扭转强度的影响

对驱动轮工艺轴进行了7种工艺方案的感应热处理表面强化,然后对工艺轴进行扭转破坏试验。通过对驱动轮工艺轴扭转断裂的研究,为驱动轮轴及承受扭力的轴类零件结构设计、工艺流程设计和热处理技术要求提供指导,从而提高其扭转疲劳强度和使用寿命。     

乐都县森林防火之我见

森林火灾是森林最危险的敌人,也是林业最可怕的灾害,它会给森林带来最有害,具有毁灭性的后果,本文针对提出实质性的意见。     

基于SHPB试验的桦木压缩动力学特性

【目的】利用木材动态压缩加载试验研究热磨机研磨解离破碎阶段木材原料受动态压缩载荷的动力学特性，并研究应变率、加载方向对木材原料动力学特性的影响，旨在深化木材原料研磨解离机制的研究，为热磨法纤维分离设备及磨片的齿形结构优化设计提供理论指导。【方法】利用 Hopkinson 杆试验装置对含水率为12.65%、密度为0.50 g·cm －3的桦木试件进行应变率约为400，800，1200 s －1，加载方向为径向、弦向和轴向的动态压缩试验，获得桦木在不同应变率及方向上动态压缩加载的解离特征、动态应力－应变曲线及相应的力学特性。【结果】对比分析各组试验后试件的破坏形态发现：1)当应变率约为400 s －1时，径向、弦向和轴向加载的试件主要发生塑性变形；2)当应变率约为800 s －1时，径向加载试件被解离成几大块，并且有一些“火柴棍”状的小试件从大试件上剥离；弦向加载试件沿加载方向上产生更大的塑性变形，并且在试件上、下两端处沿加载方向产生贯穿性裂纹，试件被解离成三大块；轴向加载试件受载面边缘处的纤维大量产生压溃现象，在加载面上产生贯穿性裂纹且有片状小试件从大试件上剥离；3)当应变率约为1200 s －1时，径向加载试件被解离成大量“火柴棍”状的小试件，并且小试件的尺寸明显小于应变率为800 s －1时；弦向加载试件沿加载方向上产生的塑性变形与应变率为800 s －1时相当，但是试件上端处被解离成许多片状的小试件，并且沿加载方向试件上产生了数条贯穿整个试件的大裂纹；轴向加载试件被解离成大量短粗状的小试件，并且小试件上带有明显的褶皱。对比分析各组试验试件的应力－应变曲线发现：1)动态压缩加载条件下桦木的应力－应变曲线可以由屈服点应变分为弹性阶段和屈服后弱线性强化阶段2部分；2)桦木沿径向加载应变率约为400，800，1200 s －1时，其屈服强度和韧性模量分别为4.56，10.49，14.22 MPa 和2.88，8.32，20.70 kJ·cm －3，应变率从400 s －1增加到1200 s －1时，屈服强度和韧性模量分别增加了2.11和6.19倍；3)桦木沿弦向加载应变率约为400，800，1200 s －1时，其屈服强度和韧性模量分别为5.87，7.90，9.65 MPa 和2.53，7.41，12.92 kJ·cm －3，应变率从400 s －1增加到1200 s －1时，其屈服强度和韧性模量分别增加了0.64和4.10倍；4)桦木沿轴向加载应变率约为400，800，1200 s －1时，其屈服强度分别为22.90，71.41，96.37 MPa 和18.79，67.74，114.32 kJ·cm －3，应变率从400 s －1增加到1200 s －1时，其屈服强度和韧性模量分别增加了3.21和5.08倍。【结论】随着应变率的增加，桦木的解离程度加大，径向加载最易解离，轴向加载最难解离；桦木的动态压缩屈服强度、动态压缩韧性模量具有很强的应变率敏感性，是一种应变率敏感材料。     

退化高寒草甸斑块根—土复合体特征研究

高寒草甸斑块的根-土复合体对局部水土流失过程具有调控作用,为研究其特征及抗侵蚀效应,本研究选取三江源区达日县境内典型中度退化草甸的植被斑块为研究对象,调查草甸斑块中心与边缘植物群落特征,测定斑块边缘0～10 cm土层和斑块中心0～20 cm土层的容重、含水率、毛管孔隙度等土壤物理性质,并开展单根拉伸和根-土复合体直剪试验。结果表明：受优势种矮嵩草的分布影响,地上生物量主要分布在斑块中心,根系主要分布在0～10 cm土层;斑块中心区域土壤抗剪强度、内摩擦角和粘聚力均随土层深度的增加而减小;斑块边缘区域土壤粘聚力,抗剪强度明显高于斑块中心区域,草甸斑块植物根系是土壤抗剪强度的主要影响因素。草甸斑块根-土复合体能明显增加退化草甸土壤的抗侵蚀能力,研究结果可为深入研究高寒草甸根系固土功能及水土流失调控提供科学依据。     

Strength and Microstructure of Sulphoaluminate Cement Containing Ultra- Fine CaCO3

The existence of ettringite in sulphoaluminate cement hardened paste is mainly in the form of pole-like crystal,which causes unfavorable effect on the cement.In this paper the strength and microstructure of the sulphoaluminate cement containing ultra-fine CaCO_3 weze discussed.Experimet results show that the strength of sulphoaluminate cement was obviously improved by adding 3% of ultra-fine CaCO_3.After curing for 28d,the compressive strength of cement paste and mortar is 100.6MPa and 94.1MPa respectively,and the bending strength of the mortar reached 12.5MPa.SEM study on hardened paste of sulphoaluminate cement containing ultra-fine CaCO_3 showed that its structure was dense and homogeneous,there was hardly any massive crystall detected.     

Experiment for Condensing Heat Transfer Performance in a New Type of Horizontal Three Dimensional Inner Microfin Tubes

A new type of three dimenstional inner microfin tube is devoloped. Under four different pressures and in the range of condensing mass velocities from 33 to 153 kg/m2 . s,and by the experimental study of the three kinds of tubes with different microfin parameters, the performances of the condensation heat transfer for R11 in the horizontal microfin tubes and obtained. The experiments show that the inner microfin tube is a hopeful and nighty effective condensing heat transfer enhancement tube.     

Dropwise Condensation Heat Transfer Coefficient on the Horizontal Circular Surface with Radial Gradient Surface Energy

A theoretical model is developed for the dropwise condensation heat transfer on the horizontal circular surface with radial gradient surface energy based on the heat transfer model of individual condensate drop and the size distribution model of condensate drop on homogeneous condensation surface.The effect of variation of contact angle on the gradient surface on condensation heat transfer and condensate drop size distribution is taken account of in this model.The theoretical calculation method was obtained to predict the dropwise condensation heat transfer coefficient on the horizontal circular surface with radial gradient surface energy under various wall subcooled temperature,contact angle profile on wall surface,and working fluid.The effects of surface energy gradient,wall subcooled temperature,and thermophysical properties of condensate on the condensation heat transfer are discussed respectively.The calculation results show that the condensation heat transfer coefficient increases slightly with the increase of wall subcooled temperature.As latent heat and surface tension increasing,the condensation heat transfer coefficient increases.A larger surface energy gradient induces a larger condensation heat transfer coefficient.     

Solution the Polarization Field Strength inside Ellipsoid in a Homogeneous Dielectric

The solution of polarization field strength in ellipsoid and a homogeneous dielectric in condition of a constant external field is obtained with strict derivation and ellipsoidal coordinate. The conclusion that some textbooks given: the direction of polarization field strength with the direction of external field holds strict anti-parallel must be supplemented with additive certain conditions, otherwise it will not be correct. By means of the latticework and the step change calculation, the angle value of polarization vector with the external field is calculated and the changing situation about the angle value with the change of three half axes of ellipsoid is analysied.