Tillage and land use effects on soil microporosity in Ohio, USA and Kolombangara, Solomon Islands

Micropores are important to soil moisture retention and plant growth. Microporosity and pore size distribution were evaluated using mercury intrusion porosimetery on aggregates from 35-year-old experiments started in 1962 at Wooster (40.5 °N, 82 °W) and South Charleston (39.8 °N, 84 °W) in Ohio, USA and from three land use practices on Kolombangara (8 °S, 157 °E) in Solomon Islands. Tillage treatments in Ohio included: moldboard plowing (MP), chisel plowing (CP), and no-till (NT) with continuous corn. The land use treatments in Kolombangara included: natural forest (NF), traditional farming (TF) and topsoil removal (TR). Pore size measured in aggregates ranged from 0.2 to 100 μm in diameter. Median pore radius was significantly (P < 0.05) larger for NT than for MP and CP treatments at Wooster, but not at South Charleston. Tillage treatments had significant effect on the volume of both storage and residual pores for both sites in Ohio. Volume of storage and residual pores were higher for Wooster than South Charleston soil. At Kolombangara, the NF treatment had significantly larger median and peak pore radii, and microporosity than TF and TR treatments. There was, however, no significant difference among treatments in the volume of pore size distribution. These data support a recommendation for adoption of no-till or conservation tillage in soils of the temperate region, and of minimal disturbance and effective erosion control in soils of the tropics.     

Influence of tillage and crop residue on soil physical properties and yields of rice and wheat under shallow water table conditions

An experiment was conducted to evaluate the effects of tillage and residue incorporation on soil properties and yields of rice (Oryza sativa L.) and wheat (Triticum aestivum L.) in rotation for 4 years on a silty clay loam of an Aquic Hapludoll with natural water table fluctuating between 0.05 and 0.97 m depth The rice experiment was laid out in split plot design with four levels of tillage, viz. conventional puddling (CP), puddling by four passes of rotavator (PR), reduced puddling by two passes of rotavator (ReP), and direct seeding without puddling (DSWP) and two levels of residue, viz. residue incorporation (RI) and residue removal (RR) in four replications. The treatments for wheat were zero tillage (ZT) and conventional tillage (CT) with RI and RR superimposed over the plots of rice. Tillage for rice increased puddling index and bulk density (BD) over the years. The increase was significantly higher in CP and PR than in ReP. In wheat season, BD was higher under ZT than under CT but the differences were not significant. Puddling decreased saturated hydraulic conductivity with time, which became significantly lower in CP and PR in the fourth year than in ReP in the first year. Infiltration rate (IR) also decreased with time and was lowest in CP and PR. In wheat season, IR was at par under ZT and CT. Rice yield in PR was maximum and at par with that in ReP. But wheat yield was lowest in PR and highest in DSWP, and was at par in DSWP and ReP. Thus, rice yields were optimum under ReP, in which changes in soil properties were least, and wheat yields were optimum both under ZT and CT in the DSWP and ReP plots of rice under shallow water table conditions of the silty clay loam.     

Tillage and cropping sequence impacts on nitrogen cycling in dryland farming in eastern Montana, USA

Information on N cycling in dryland crops and soils as influenced by long-term tillage and cropping sequence is needed to quantify soil N sequestration, mineralization, and N balance to reduce N fertilization rate and N losses through soil processes. The 21-yr effects of the combinations of tillage and cropping sequences was evaluated on dryland crop grain and biomass (stems + leaves) N, soil surface residue N, soil N fractions, and N balance at the 0–20 cm depth in Dooley sandy loam (fine-loamy, mixed, frigid, Typic Argiboroll) in eastern Montana, USA. Treatments were no-tilled continuous spring wheat (Triticum aestivum L.) (NTCW), spring-tilled continuous spring wheat (STCW), fall- and spring-tilled continuous spring wheat (FSTCW), fall- and spring-tilled spring wheat–barley (Hordeum vulgare L.) (1984–1999) followed by spring wheat–pea (Pisum sativum L.) (2000–2004) (FSTW-B/P), and spring-tilled spring wheat–fallow (STW-F). Nitrogen fractions were soil total N (STN), particulate organic N (PON), microbial biomass N (MBN), potential N mineralization (PNM), NH₄-N, and NO₃-N. Annualized crop grain and biomass N varied with treatments and years and mean grain and biomass N from 1984 to 2004 were 14.3–21.2 kg N ha⁻¹ greater in NTCW, STCW, FSTCW, and FSTW-B/P than in STW-F. Soil surface residue N was 9.1–15.2 kg N ha⁻¹ greater in other treatments than in STW-F in 2004. The STN at 0–20 cm was 0.39–0.96 Mg N ha⁻¹, PON 0.10–0.30 Mg N ha⁻¹, and PNM 4.6–9.4 kg N ha⁻¹ greater in other treatments than in STW-F. At 0–5 cm, STN, PON, and MBN were greater in STCW than in FSTW-B/P and STW-F. At 5–20 cm, STN and PON were greater in NTCW and STCW than in STW-F, PNM and MBN were greater in STCW than in NTCW and STW-F, and NO₃-N was greater in FSTW-B/P than in NTCW and FSTCW. Estimated N loss through leaching, volatilization, or denitrification at 0–20 cm depth increased with increasing tillage frequency or greater with fallow than with continuous cropping and ranged from 9 kg N ha⁻¹ yr⁻¹ in NTCW to 46 kg N ha⁻¹ yr⁻¹ in STW-F. Long-term no-till or spring till with continuous cropping increased dryland crop grain and biomass N, soil surface residue N, N storage, and potential N mineralization, and reduced N loss compared with the conventional system, such as STW-F, at the surface 20 cm layer. Greater tillage frequency, followed by pea inclusion in the last 5 out of 21 yr in FSTW-B/P, however, increased N availability at the subsurface layer in 2004.     

Soil Nutrients Status after Fifty Years of Tillage and Nitrogen Fertilization

Long-term studies are valuable in assessing the impact of crop management practices on soil sustainability and function. This study used two calculation scenarios, fixed depth and Equivalent Soil Mass (ESM) to assess (i) soil nutrient status and (ii) soil organic carbon (SOC) after 50 years of nitrogen (N) fertilizer application rates (0, 22, 45, and 67 kg N ha^?1) and tillage [clean tillage (CT), reduced tillage (RT), and no-tillage (NT)] in a dryland winter wheat-sorghum-fallow cropping system. The soil organic matter (SOM) content increased by 33% with NT and RT compared with CT. The SOC at 0–30 cm was 39% greater than 30–60 cm depth with both fixed depth and ESM calculations. Soil nutrient specifically soil calcium (Ca), magnesium (Mg), and phosphorus (P) associated with N rates were no different than the control. Crop nutrient removal may eventually reduce soil nutrient contents with only N application. Nutrient addition specifically P should be considered in the future.     

Effects of tilling no-till soil on losses of atrazine and glyphosate to runoff water under variable intensity simulated rainfall

Herbicides released through agricultural activities to surface waters and drinking water systems represent a risk to human and environmental health, as well as a cost to municipalities for removal. This study focuses on the viability of glyphosate tolerant cropping systems as an alternative to atrazine-based systems, and the impact of tilling historically no-till ground on the runoff pollution potential of these systems. Variable intensity field rainfall simulations were performed on 2 m long × 1 m wide plots within a field in first-year disk and harrow following no-till (CT), and within a long-term no-tilled (NT) field, both treated with atrazine and glyphosate according to label. Rainfall sequence was: 50 mm h⁻¹ for 50 min followed by 75 mm h⁻¹ for 15 min, 25 mm h⁻¹ for 15 min, and 100 mm h⁻¹ for 15 min. Runoff was collected at regular time intervals during two simulated rainfall events and analyzed for herbicide concentration, sediment content, and volume. Maximum glyphosate concentration in runoff was 233 μg L⁻¹ for NT and 180 μg L⁻¹ for CT (approximately 33% and 26% of the maximum contaminant limit (MCL) for glyphosate (700 μg L⁻¹), respectively, while maximum atrazine concentrations in runoff was 303 μg L⁻¹ for NT and 79 μg L⁻¹ for CT (approximately 100 times and 26 times the atrazine MCL (3 μg L⁻¹)). Atrazine concentration and loading were significantly higher in runoff from NT plots than from CT plots, whereas glyphosate concentration and loading were impacted by tillage treatment to a much lesser degree. Results suggest that glyphosate-based weed management may represent a lower drinking water risk than atrazine-based weed management, especially in NT systems.     

Simulating management effects on crop production, tile drainage, and water quality using RZWQM-DSSAT

The objective of this study was to explore if more crop-specific plant growth modules can improve simulations of crop yields, and N in tile flow under different management practices compared with a generic plant growth module. We calibrated and evaluated the Root Zone Water Quality Model (RZWQM) with the Decision Support for Agrotechnology Transfer (DSSAT v3.5) plant growth modules (RZWQM-DSSAT) for simulating tillage (NT — no till, RT — ridge till, CP — chisel plow, and MP — moldboard plow), crop rotation {CC — continuous corn, and CS — corn (Zea mays L.)-soybean [Glycine max (L.) Merr.]}, and nitrogen (N) (SA — single application at preplant, and LSNT — late spring soil N test based application) and manure (SM — fall injected swine manure) management effects on crop production and water quality. Data from 1978 to 2003 from a water quality experiment near Nashua (Nashua experiments), Iowa, USA, were used. The model was calibrated using data from one treatment plot and validated for the rest of the plots. Simulated management effects on annual N loading in tile flow were agreeable with measured effects in 85%, 99%, 88%, and 78% of the cases for tillage, crop rotation (CS vs. CC), N application timing (SA vs. LSNT), and swine manure applications (SM vs. SA), respectively. On average, the LSNT plots were simulated to have 359 kg ha^− 1 higher corn yield compared to SA, when the observed increase was 812 kg ha^− 1. Grain yield simulations were not sensitive to differences between RT and NT, between SM and SA treatments, and between CS and CC. We conclude that considering the uncertainties of basic input data, processes in the field, and lack of site specific weather data, the results obtained with this RZWQM-DSSAT hybrid model were not much better than the results obtained earlier with the generic crop growth module.     

Nutrient availability and cocoyam yield under different tillage practices

Research information on the effect of tillage systems on cocoyam (Xanthosoma sagittifolium (L.) Schott) growth, nutrient status and yield is lacking in Africa. The effects of zero tillage with mulch, zero tillage without mulch, manual mounding, manual ridging and conventional tillage on cocoyam yield, growth and nutrient availability were compared during 2 years on an Alfisol (Oxic Tropuldaf) at Owo in the rainforest zone of Nigeria. The surface soil (0–20 cm) was chemically analyzed before and after crop harvest and selected soil physical properties were determined. Concentration of soil organic C, N, P, K and Mg and the leaf N, P and K were significantly influenced (p = 0.05) by tillage, with zero tillage with mulch being the most effective treatment in conserving the fertility of the surface soil (0–20 cm). Soil fertility, as indicated by organic C, N, P, K, Ca and Mg, declined significantly (p = 0.05) over time in all tillage systems, but this decline was more pronounced in the conventional tillage. Zero tillage with mulch, zero tillage without mulch, manual mounding, manual ridging and conventional tillage reduced the soil organic C concentration by 20, 23, 23, 24 and 33%, respectively over the 2-year period. The decreases in soil N concentration were 25, 31, 31, 38 and 56%, soil P concentration were 13, 15, 17, 16 and 26%, and soil K concentration were 16, 26, 31, 37 and 53%, respectively. Tillage did not affect corm and cormel yields in the first year. In the second year, due to the elimination of ploughing, significant differences were obtained in the cormel yield but not of corm yield. In 2005, zero tillage with mulch produced the highest cormel yield (13.5 mg ha⁻¹) of cocoyam followed by zero tillage without mulch (13.2 mg ha⁻¹), manual mounding (12.7 mg ha⁻¹) and manual ridging (12.5 mg ha⁻¹). The lowest cormel yield (9.5 mg ha⁻¹) of cocoyam was produced by conventional tillage. Soil water contents in zero tillage with mulch and zero tillage without mulch were significantly higher (p = 0.05) than in the other tillage systems. Soil bulk density ranging from 1.21 to 1.40 mg m⁻³ correlated positively with leaf nutrient concentration and yield. Cocoyam can be grown successfully on zero tillage, with mulch and without mulch or minimum tillage systems on an Alfisol of the humid tropics.     

耕作方式对土壤螨类群落结构的影响

土壤螨类是土壤生态系统中重要的指示生物之一。为探讨耕作方式对土壤螨类数量、类群数、群落结构以及垂直分布的影响, 试验选取位于东北黑土区中国科学院海伦农田生态系统国家野外科学观测研究站中5种耕作方式(免耕耕作、少耕耕作、平翻耕作、组合耕作和旋耕耕作)试验区内土壤螨类为研究对象, 采用改良干漏斗(Modified Tullgren)法, 于2009年5月、6月和7月3个时期分离0~15 cm土层中的土壤螨类。结果表明: 耕作方式对土壤螨类数量和类群数存在显著影响, 3个时期共捕获土壤螨类2 441只, 免耕耕作、少耕耕作、组合耕作、旋耕耕作和平翻耕作分别捕获土壤螨类366只、436只、553只、819只和267只, 分别隶属于13科、18科、13科、14科和11科。传统的旋耕耕作具有最高的土壤螨类个体数量, 而保护性耕作中的少耕耕作具有最高的土壤螨类类群数。不同时期耕作方式对土壤螨类垂直分布的影响不同, 5月除免耕耕作外其他4种耕作方式均较好地保持了土壤螨类垂直分布的表聚特征, 即0~5 cm土层中土壤螨类的数量显著(P<0.05)高于其他两层(5~10 cm, 10~15 cm), 其中组合耕作和少耕耕作在3个时期中均较好地保持了土壤螨类的表聚特征, 且少耕耕作较好地保持了土壤螨类的多样性。MGP分析结果表明: 土壤甲螨群落随季节的变化在组成上发生变化, 从最初的高等甲螨为优势类群转化为低等甲螨为优势类群, 免耕和少耕的这种趋势较其他耕作方式更为明显, 少耕耕作3个时期土壤甲螨的组成类型分别为P型、G型和O型, 而免耕耕作3个时期土壤甲螨的组成类型分别为P型、O型和G型。少耕和免耕两种保护耕作方式较其他耕作方式更有利于土壤螨类群落结构的稳定性及多样性的保持, 有利于农田土壤生态环境的保护。     

A method for estimating coefficients of soil organic matter dynamics based on long-term experiments

The one-compartment C model C_t=C₀e^−k₂t+k₁A/k₂(1−e^−k₂t) is being long used to simulate soil organic C (SOC) stocks. C_t is the SOC stock at the time t; C₀, the initial SOC stock; k₂, the annual rate of SOC loss (mainly mineralization and erosion); k₁, the annual rate to which the added C is incorporated into SOC; and A, the annual C addition. The component C₀e^−k₂t expresses the decay of C₀ and, for a time t, corresponds to the remains of C₀ (C_0 remains). The component k₁A/k₂(1−e^−k₂t) refers, at time t, to the stock of SOC derived from C crops (C_crop). We herein propose a simple method to estimate k₁ and k₂ coefficients for tillage systems conducted in long-term experiments under several cropping systems with a wide range of annual C additions (A) and SOC stocks. We estimated k₁ and k₂ for conventional tillage (CT) and no-till (NT), which has been conducted under three cropping systems (oat/maize −O/M, vetch/maize −V/M and oat + vetch/maize + cowpea −OV/MC) and two N-urea rates (0 kg N ha⁻¹ −0 N and 180 kg N ha⁻¹ −180 N) in a long-term experiment established in a subtropical Acrisol with C₀ = 32.55 Mg C ha⁻¹ in the 0–17.5 cm layer. A linear equation (C_t = a + bA) between the SOC stocks measured at the 13th year (0–17.5 cm) and the mean annual C additions was fitted for CT and NT. This equation is equivalent to the equation of the model C_t=C₀e^−k₂t+k₁A/k₂(1−e^−k₂t), so that a=C₀e^−k₂t and bA=k₁A/k₂(1−e^−k₂t). Such equivalences thus allow the calculation of k₁ and k₂. NT soil had a lower rate of C loss (k₂ = 0.019 year⁻¹) than CT soil (k₂ = 0.040 year⁻¹), while k₁ was not affected by tillage (0.148 year⁻¹ under CT and 0.146 year⁻¹ under NT). Despite that only three treatments had lack of fit (LOFIT) value lower than the critical 5% F value, all treatments showed root mean square error (RMSE) lower than RMSE 95% indicating that simulated values fall within 95% confidence interval of the measurements. The estimated SOC stocks at steady state (C_e) in the 0–17.5 cm layer ranged from 15.65 Mg ha⁻¹ in CT O/M 0 N to 60.17 Mg ha⁻¹ in NT OV/MC 180 N. The SOC half-life (t_1/2 = ln 2/k₂) was 36 years in NT and 17 years in CT, reflecting the slower C turnover in NT. The effects of NT on the SOC stocks relates to the maintenance of the initial C stocks (higher C_0 remais), while increments in C_crop are imparted mainly by crop additions.     

Soil porosity and water infiltration as influenced by tillage methods

The relations between soil pore structure induced by tillage and infiltration play an important role in flow characteristics of water and solutes in soil. In this study, we assessed the effect of long-term use of various tillage systems on pore size distribution, areal porosity, stained (flow-active) porosity and infiltration of silt loam Eutric Fluvisol. Tillage treatments were: (1) ploughing to the depth of 20 cm (conventional tillage (CT)); (2) ploughing to 20 cm every 6 years and to 5 cm in the remaining years (S/CT); (3) harrowing to 5 cm each year (S); (4) sowing to the uncultivated soil (no tillage (NT)), all in a micro-plot experiment. Equivalent pore size distribution was derived from the water retention curve, areal porosity – from resin-impregnated blocks (8 cm × 9 cm × 4 cm) and stained porosity – from horizontal sections (every 2 cm) of column samples (diameter: 21.5 cm, height: 20 cm) taken after infiltration of methylene blue solution. The pore size distribution curves indicated that the textural peaks of the pore throat radius of approximately 1 μm were mostly defined under NT, whereas those in the structural domain of radii of 110 μm radius—under CT. The differences among the tillage treatments were more pronounced at depth 0–10 cm than 10–20 cm. At both depths, the differences in pore size distribution between the tillage treatments were relatively greater in structural than those in the matrix domain. CT soil had the greatest areal porosity and stained porosity. The stained porosity as a function of depth could be well described by logarithmic equations in all treatments. Cumulative infiltration (steady state) as measured by the double ring infiltrometer method was the highest under CT (94.5 cm) and it was reduced by 62, 36 and 61% in S/CT, S and NT soil, respectively. Irrespective of tillage method, cumulative infiltration rates throughout 3 h most closely correlated with stained porosity in top layers (0–6 cm). Overall, the results indicate that soil pore system under CT with higher contribution of large flow-active pores compared to reduced and no tillage treatments enhanced infiltration and water storage capacity.