Evaluation of Cold Tolerance in NERICAs Compared with Japanese Standard Rice Varieties at the Reproductive Stage

New Rice for Africa (NERICA) is a general name for interspecific rice varieties derived from a cross between the high‐yielding Asian rice (Oryza sativa L.) between locally adapted African rice (Oryza glaberrima Steud.). Eight NERICAs were evaluated for cold tolerance (CT) at the reproductive stage and compared with their O. sativa parents and three Japanese standard rice varieties over 3 years. Cold tolerance was evaluated based on the filled grain ratio (FGR) after cold water irrigation. The FGR was greatly reduced by cold water irrigation. NERICA 1, 2 and 7 had higher FGR (51.9–57.9 %), while NERICA 6, 15 and 16 had lower FGR (6.2–14.5 %). NERICA 1, 2 and 7 were less affected by cold stress, with a 31 % mean reduction in FGR, while NERICA 6, 15 and 16 were greatly affected, with their FGRs being reduced by more than 80 %. NERICA 3 and 4 were moderately affected by cold stress, with about 45 % reduction rate in FGR. FGR significantly influenced the grain weights of the varieties with strong positive correlations (r = 0.83–0.91; P < 0.001), and thus, similar trends in grain weights were observed. Grain weights were reduced by 61.7–96.4 % under cold stress. NERICA 1, 2 and 7 showed significantly better performance than NERICA 3 and 4, while NERICA 6, 15 and 16 performed poorly under cold water irrigation. The Japanese varieties Koshihikari (very tolerant) and Ozora (moderately tolerant) were more affected by cold water irrigation than NERICA 1, 2 and 7. On the basis of the mean reduction rate (%) in FGR under cold stress, the varieties were classified as follows: NERICA 1, 2 and 7 as tolerant; NERICA 3 and 4 as moderately tolerant; and NERICA 6, 15 and 16 as susceptible to cold stress. However, NERICA 7 grain yields were lower under cold stress due to both greatly reduced number of panicles per plant and number of spikelets per panicle. Therefore, NERICA 1 and 2 are suitable candidates for production in the highland regions of East Africa and should be promoted for production.     

水稻BWMK1互作基因的分离

为探明BWMK1介导的信号传导途径,采用酵母双杂交系统,构建水稻稻瘟病菌诱导后的cDNA文库,以BWMK1为诱饵,对文库进行筛选,通过验证、测序和基因编码分析,获得了7个BWMK1互作基因BWIP1～BWIP7,分别位于水稻基因组第12、2、3、10、6、4、5染色体上；7个互作基因中,除BWlP2和BWIP7未找到同...     

水稻半外卷叶突变体sol1的表型分析与基因定位

适度卷曲有利于提高水稻叶片的光合效率,增加植株光合产物的有效积累量。我们利用甲基磺酸乙酯(EMS)处理籼型水稻保持系西农1B,获得一个稳定遗传的水稻半外卷叶突变体。该突变体从十叶期开始各叶片逐渐向外卷曲直至半卷状,并伴随茎秆半矮化和叶片披垂,暂被命名为semi-outcurved leaf 1(sol1)。与野生型(WT)相比,sol1的叶片卷曲指数均达到30%以上(P<0.01);倒一、倒二、倒三、倒四节节间长度和穗长极显著缩短,倒一、倒二、倒三叶的叶夹角显著或极显著增加;有效穗数、千粒重、每穗实粒数、结实率显著或极显著下降,一次枝梗数则增加11.3%(P<0.05)。sol1的蒸腾速率、胞间CO2浓度、气孔导度显著高于野生型。石蜡切片显示,sol1倒一叶的泡状细胞体积变小,数量显著增多,表皮细胞体积略微增大。遗传分析表明,sol1的半外卷叶性状受1对隐性核基因调控,定位于6号染色体标记JY6-3和JY6-10之间165 kb的物理范围内,共含15个注释基因。qRT-PCR结果表明,与泡状细胞相关的内卷基因和外卷叶基因RL14、Roc5、REL1在突变体sol1中呈不同程度的上调,NRL、BRD1、OsHox32、ADL1、LC2则呈不同程度的下调。研究结果为SOL1基因的克隆和功能研究奠定了基础。     

PF455S插秧机及其侧离合器手柄的探讨和改善

PF455S插秧机的行走底盘与国产独轮驱动插秧机相比,水田机动性能和通过性较好,但也存在手柄安装夹紧不当等问题。介绍PF455S动力插秧机的系统组成、设计原理与主要参数,对发现的侧离器手柄问题进行改进,达到了设计目的。     

化肥减氮及有机肥配施对水稻产量及土壤养分含量的影响

本文旨在研究等磷、钾量条件下，化肥减氮及有机肥不同用量配施对水稻产量及土壤养分的影响，试验共设6个处理，分别为T1∶80%N+20%有机肥；T2∶80%N+40%有机肥；T3∶70%N+60%有机肥；T4∶70%N+80%有机肥；T5∶60%化肥+100%有机肥；CK：100%N+0，对水稻生育期株高、群体动态、产量、构产因子以及秋季土壤养分含量进行分析，结果表明：1化肥减氮20%时，不会对水稻造成明显减产，且当有机肥配施量为500kg·mu-2时，水稻籽粒产量最高，为775.19kg·mu-2，比CK增产17.20%；2有机肥的施用能提高水稻基本苗，对水稻穗长有显著提高效果，对空秕率影响较大，对枝梗数影响最小；3化肥减氮+有机肥配施可以提高土壤肥力，增加土壤有机质含量，提高土壤碱解氮、速效钾含量。     

杂交稻三香优410的特征特性及栽培技术

三香优410在建瓯种植,表现出丰产性好、抗性较强、米质优良等特性,栽培上要注意选好秧田、培育壮秧、合理密植、科学施肥、做好水管、病虫防治。     

北京龙耘种业有限公司

中单28是中国农科院作物所选育的高产、多抗、优质、中晚熟普通玉米单交种，其组合为中1128x中5493。2005年4月经北京市农作物品种审定，审定编号为：京审玉2005001。2007年3月经山西省农作物品种审定，审定编号为：晋引玉2007008。     

6种钝化剂对糙米镉含量及镉在水稻中的转移和富集的影响

旨在为合理使用钝化剂及水稻糙米镉(Cd)含量与Cd在水稻体内富集和转移的关系提供一定的理论依据。从6种钝化剂中筛选出能够抑制糙米Cd积累的材料,通过对不同超标程度水稻组的产量、糙米Cd含量、各个器官对Cd的富集系数和转移系数进行统计分析,探讨不同钝化剂对Cd在水稻体内转移和富集的影响。结果表明:与对照相比,低、中浓度C材料和FA材料能够降低糙米中Cd浓度;FB材料和中、高浓度FD材料会促使糙米中Cd的积累。水稻各器官对Cd富集能力,无超标水稻为根茎米叶糠,超标水稻为根茎米糠叶;Cd向糙米的转移途径中,在不超标水稻组中糠—米的转移能力最强,在超标水稻组中叶—米的转移能力最强。