非班太尔对照品的定值研究

(目的)本文旨在联合使用质量平衡法与差示扫描量热法2种定值方法测定非班太尔对照品的含量。(方法)采用高效液相色谱法测定非班太尔的纯度,采用卡尔费休氏容量滴定法、炽灼残渣检查法、气相色谱法分别测定其水分、灰分和残留溶剂,由质量平衡法公式计算非班太尔对照品的含量;采用差示扫描量热法对非班太尔对照品含量加以佐证。(结果)质量平衡法和差示扫描量热法测定结果经科克伦判定互为等精度,取其算术平均值作为最终定值结果,即非班太尔对照品含量为99.66%。(结论)质量平衡法与差示扫描量热法对非班太尔对照品的定值结果基本一致,2种方法能够更好地保证非班太尔对照品赋值的准确性。     

Quantification of reservoir bags as airway pressure-limiting devices in a nonrebreathing system

ObjectiveTo evaluate the influence of reservoir bag types, volumes and previous use on the peak pressures (Pmax) and the times to develop 30 cmH₂O pressure (P30) within a nonrebreathing system with a closed adjustable pressure-limiting (APL) valve.Study designIn vitro study using three-way factorial design with repeated measure on one factor.SubjectsA total of 75 new anesthesia reservoir bags (five types, three volumes, five bags from each type × volume). The bag types were reusable latex (RL), disposable latex (DL) and three disposable neoprene (DN-1, DN-2 and DN-3).MethodsEach bag was tested three times (treatments): new, after prestretching and 1 week later. The bags were attached to a Bain system and anesthesia machine with closed APL valve and patient port with O₂ flow 2 L minute^–1 until Pmax was reached. The Pmax and time to reach P30 values were determined from recorded pressure traces. General linear mixed model analysis was used to examine the effects of bag type, volume and treatment. One-sided 95% upper prediction limits of Pmax were calculated to test the null hypothesis that predicted Pmax of new bags would be ≥ 50 cmH₂O for each factor combination.ResultsRL bags were the least and DN-3 bags were the most compliant. Prestretching increased compliance in all bag types. Smaller bags of RL, DL and DN-1 were less compliant than larger ones. The predicted Pmax values were < 50 cmH₂O only for DN-3 bags after prestretching. The time to reach P30 was critically low when using 0.5 L bags (median 17 seconds).Conclusions and clinical relevanceTo minimize the risk of barotrauma, highly compliant reservoir bags (e.g. DN-3) are recommended and reusable bags should be avoided. Bags should be prestretched before first use, 0.5 L bags should be avoided and fresh gas flow minimized.     

基于TC35模块的智能家居控制系统

随着这些年的研究,智能家居有很多种实现方式,文章介绍的智能家居控制系统采用单片机和TC35模块组成,使人们通过手机在任何时候,发一个短信,就可以对家中的电器（空调、照明灯,电饭煲、热水器等）进行远程控制。     

微热光电系统燃烧室内截面突变对燃烧的影响

微燃烧室是微热光电（MTPV）系统的重要组成部分。微燃烧室的外表面必须产生一个高而均匀的温度分布，以尽可能高地输出辐射能。通过对截面突变的微燃烧室的试验研究，得到了不同氢氧混合气流量、氢氧体积混合比下燃烧室内的燃烧状况，壁面和出口端面的温度分布。试验结果表明：采用截面突变的燃烧室能很好地控制火焰中心位置，获得稳定的外壁面温度分布规律，可以在截面突变处产生涡流，增强氢气和氧气的混合。     

双向电液比例张力绞车的直接自适应鲁棒控制

设计了基于比例溢流阀调压回路的双向电液比例张力绞车,并进行了理论分析。针对液压系统的不确定性因素以及卷绕机构参数变化对张力控制的影响,提出了直接自适应鲁棒电液张力控制方法,并用张力负载模拟试验系统进行了研究。理论分析与试验均表明,对于具有不确定性因素的张力跟踪控制,所设计的电液张力绞车及其控制策略,具有良好的控制性能。     

液压油液数字建模与仿真

因液压油液的温度、压力及油中已溶解或未溶解的空气量等因素变化时,油液的特性会发生非线性行为变化,从而影响液压系统的性能,为此对液压油的综合特性进行了研究。推导出溶解了空气的液压油液密度及油中空气含量随油液压力、温度变化的函数关系;应用Matlab软件编制的仿真程序,对液压油的非线性特性进行了大量仿真计算,并讨论了影响液压油密度、体积弹性模量的因素。     

粮食生产的机械化问题

粮食牛产机械化是生产力发展的一个重要方而，也是一种必然趋势。机械化生产手段可以提高粮食产量，确保粮食生产持续发展，提高粮食生产效率和经济效益。粮食生产机械化不仅是农业技术变迁的一种自然发展过程，而且与制度变迁密切相关、互相促进。在粮食生产机械化中，有很多现实问题需要解决。     

车载式拖拉机座椅舒适性测试系统的研究

应用美国模拟器件公司的ADXL105微型力平衡式加速度传感器、美国Cygnal公司F320型单片机组成车载式拖拉机座椅舒适性测试系统，系统易标定、成本低、供电方式简单。试验结果表明，在其他条件相同时，拖拉机座椅固有频率只要避开人体敏感的频率范围，座椅的舒适性就能得到明显的改善。