高等级公路测量基准面的确定及长度变形分析

分析了高等级公路平面控制网导线边投影长度变形与测区平均高程及投影带宽度的关系．根据长度变形是否满足国家标准GB50026－93要求（≤2．5cm／1km）而确定坐标系统．给出了不同坐标系统之间的换算关系．文中算例表明：用简单算法能达到公路工程测量的精度要求．     

Occurrence of microsatellites in spinach sequences from computer databases and development of polymorphic SSR markers

Microsatellites are valuable tools as molecular markers in plant breeding. To establish genetic linkage maps or for population studies, information about the occurrence and usability of microsatellite markers in different species is necessary. Sequences of spinach Spinacia oleracea from computer databases were therefore searched for the presence of microsatellites. Sixty simple sequence repeats were found in 237 spinach sequences with a total of 349.4 kb DNA. After removing duplicated sequences, 50 different microsatellites with various motifs remained. Differences between nuclear and chloroplast DNA were not in the number of microsatellites but in their type and length. Chloroplast sequences from spinach contain only short strings of A and AT repeats, whereas nuclear sequences show a wider variety of motifs. Flanking primers for polymerase chain reaction (PCR) analysis were designed for 13 of these microsatellites and tested with two different varieties of spinach. Twelve primer pairs gave amplification products and seven of these showed polymorphisms in the variety ‘Wiremona’ but only one in the variety ‘Monatol’. These markers may be used for linkage analysis or population studies in spinach.     

大豆品种间DNA限制性片段长度多态性（RFLP）的分析

用６２个大豆ＤＮＡ分子探针与５种限制性内切酶组合，对大豆基因组ＤＮＡ限制性片段长度多态性（ＲＦＬＰ）进行分析，结果表明，所选用的两对材料，其多态性ＲＦＬＰ标记的频率均高达６０％，可作为ＲＦＬＰ作图较理想的亲本，ＲＦＬＰ标记的多态性类型表现为共显性，少数为显性，其中一些标记揭示了２个或２个以上的独立分离的基因座位，不同限制性内切酶的揭示多态性的能力上差异不显著，在杂交片段长度上差异显著并都大于预期，     

突脉青冈纤维特征和化学成分研究

对突脉青冈纤维形态和化学成分的测定和分析，揭示了突脉青冈纤维形态和化学成分的特征及其纤维形态随树龄的变化规律，结果表明：突脉青冈木材可作为林产工业的纤维材料使用。     

火炬松材性变异规律的初步研究

对生长于广西南宁地区相同环境下来自美国的１８个种源１０年生火炬松的材性进行了研究。包括：材笥的种源变异。材性的地理变异模式及其与原产地气候因子的相互关系，材性因子间及其与生长因子、形态因子的相关分析。     

鹅掌楸种源材性遗传变异与选择

在鹅掌楸两个种及其杂种多地点７年生种源试验林中,随机抽取３块试验林共２８２株样本,分别遗行木材基本密度（ＢＤ）和纤维长度（ＦＬ）的测定分析,在分布型拟合与精度分析的基础上,进行一般线性方差模型分析,结果为：中国鹅掌楸种源间ＢＤ和ＦＬ均差异显著（a=0.05),５个北美鹅掌楸种源间ＢＤ和ＦＬ未达到显著差异,地点间差异及种源与地点的交互作用不显著,平均值Ｔ检测表明中国掌楸与北美鹅掌楸两种间ＢＤ和ＦＬ均不存在显著差异,鹅掌楸的ＢＤ总均值为0.397g/cm^3,ＦＬ总均值达１.603mm,属于中小密度,长纤维或近长纤维树种,差异分析揭示了种内差异是掌释属的主要变异来源,种内种源间存在选择的遗传基础,性状遗传相关分析认为,鹅掌楸ＢＤ和ＦＬ之间相互不密切（r=0.157),两本材料状与各生长因子间相关亦不密切,说明他们之间基因连锁不紧密,可独立选择。BD种源广义遗传力为H^2BD=0.65,受遗传控制较强,ＦＬ为Ｈ^FL=0.29,受遗传控制中偏弱,两性状年－年间遗传相关密切,在上述分析结果的基础上方３种标准进行了鹅掌楸属材料种源选择,其中,在“强度选择”条件下,选出ＢＤ优良的种源为庐山和桑植,ＦＬ优良的种源为浏阳和赣武夷,均为中国掌楸种源,北美种源虽然与中国种源在总体上不存在明显差异,但多数处于中等水平上,对照杂种夫性系ＢＤ和ＦＬ的均超过鹅掌楸性状总均值,但未超过最好的种源。     

Genetic Relationships among Prunus mume var. pendula Using AFLP Markers

Genetic relationships among Prunus mume var. pendula were studied by using AFLP markers. 18 accessions representing 14 cultivars ofPrunus murne var. pendula were selected from the germplasm collection at the Research Center of China Mci Flower. Seven Mse I-EcoR I AFLP primer combinations revealed 450 legible bands, and 269 of which were polymorphic markers. A similarity matrix was prepared using the simple matching coefficient of similarity and Nei‘s (72) distance coefficient. A UPGMA dendrogram demonstrated the genetic relationships of the cultivars. The information given by AFLP markers was basically consistent with the morphological classification and the evolutionary history of the morphotypes, and roughly supported the new revised classification system for Chinese Mci Cultivars. But there were still several exceptions: 1) the ‘Guhong Chuizhi‘ inserted between the ‘Tiaoxue Chuizhi‘ and the ‘Danfen Chuizhi‘; 2) the ‘Wufu Chuizhi‘ kept off the Pink Pendant Form, and the ‘Moshan Chuizhi‘ was removed from Viridiflora Pendant Form; 3) the ‘Danbi Chuizhi‘ and the ‘Shuangbi Chuizhi‘ of Viridiflora Pendant Form got together well but fell within the Pink Pendant Form.     

Promoting old-growth characteristics and long-term wood production in Douglas-fir forests

Trade-offs among wood production, wood quality and ecological characteristics in the management of harvested forest stands are explored through model simulation of various silvicultural regimes. Long-term production of merchantable wood, production of various types of high-quality wood, and the level of certain quantitative ecological indicators are projected for coniferous forests of Pacific Northwestern USA. The set of ecological indicators used is based on the species composition and physical structure of old, unlogged forest stands. Simulations are performed with an ecological model of forest stand dynamics that tracks the fate of live and dead trees. Short rotations (<50 years) produce the least amount of high-quality wood over the multi-century simulation period. They also fail to generate ecological attributes resembling those of old forest stands. Production of high-quality wood is moderate to high under all rotations of 80 years or more; however, most ecological indicators require longer rotations unless alternatives to clearcutting are applied. Alternatives examined include retention of 15% cover of live tree canopy at each harvest in combination with artificial thinning between harvests. Thinning from below can expedite the development of large live and dead trees, and canopy height diversity without greatly diminishing wood quantity or quality. Proportional thinning retains understory stems, thereby expediting the recruitment of shade-tolerant trees. A possible drawback to thinning, particularly proportional thinning, is the diminished production of clean-bole wood at rotations of 150 and 260 years. It is concluded that most wood quantity, wood quality and ecological objectives can be met with long rotations (ca. 260 years). Certain objectives can be met with shorter rotations (80–150 years) when treatments of thinning and canopy tree retention are applied.     

纤维性质对成纸性能的影响

对纤维的三个基本性质－长度、强度和粗度对纸性的影响进行了综述，着重讨论了对强度性质的影响。