酶制剂对水稻秸秆青贮发酵品质及体外消化特性的影响

为探讨纤维素酶、木聚糖酶及两种酶组合添加对水稻秸秆青贮过程中结构性、水溶性碳水化合物组分含量及体外消化特性和发酵品质的影响,试验设4个处理组:1)0.3%蒸馏水(对照组,CO);2)0.3%纤维素酶(CE);3)0.3%木聚糖酶(XE);4)0.15%纤维素酶+0.15%木聚糖酶(组合酶组,CX),分别于青贮3、7、14、30 d后取样分析。结果表明,与CO相比,CE、XE和CX组显著提高了乳酸、葡萄糖、果糖和蔗糖含量,显著降低了pH值、氨态氮、总挥发性脂肪酸、酸性洗涤纤维、中性洗涤纤维、纤维素和半纤维素含量,减少了干物质损失(P<0.05)。酶制剂显著提高了水稻秸秆青贮饲料24、48和72 h时的累积产气量和干物质体外消化率(P<0.05)。青贮末期CX组有最高的乳酸含量(34.13 g·kg^-1DM)、体外产气量(68.27 mL)、干物质体外消化率(61.31%)和最低的pH值(4.36)。与CE和XE相比,CX组水溶性碳水化合物(葡萄糖、果糖和蔗糖)含量更高。综上所述,添加酶制剂可促进结构性碳水化合物的降解,提高水溶性碳水化合物的含量,改善水稻...     

山药营养面条的研制

通过正交试验和感官评价方法,得到山药面条的最佳配方为山药粉2%,食盐1%,复合添加剂0.2%。各因素对山药面条的影响顺序为山药粉>复合添加剂>食盐,通过检测和观察面条烹煮特性、物性指标和微观结构,对山药面条品质性状进行了分析和评价。山药营养面条品质好,具有山药清香,营养丰富。     

抑制荸荠中多酚氧化酶活性的研究

通过单因素及多因素试验,探讨抑制荸荠中多酚氧化酶活性的效果。L_9(3~3)正交试验结果表明:柠檬酸预煮液的质量分数0.5%,预煮温度100℃,预煮时间5 min为最优预煮条件。     

植酸酶基因PhyA对陆地棉产量性状的影响

在人工控制(培养基、水培、沙培)条件下,植酸酶基因PhyA具有分解利用培养基质植酸磷、提高磷素利用效率的功能,但在田间的表现目前尚未明确。在前期完成的PhyA转基因陆地棉新材料盆栽试验基础上,将其种植在田间条件下,研究PhyA基因对棉花产量性状的影响。结果表明,部分转基因棉花新材料的单株结铃数、铃重、衣分、籽棉产量、皮棉产量与野生型对照存在显著差异,PhyA在田间条件下具有改良转基因棉花部分产量性状的能力。在此基础上,遴选出2个转PhyA棉花优良新品系G3、G2,可用作今后转植酸酶基因棉花新品种培育的基础材料。     

五香‘绿岭1号’薄皮核桃烘烤工艺研究

以‘绿岭1号’薄皮核桃为原料,从烘烤工艺出发,在不添加抗氧化剂的前提下,对比不同烘烤温度下薄皮核桃的干燥速率和氧化程度,优化五香薄皮核桃的烘烤条件,达到缩短烘烤时间、降低氧化程度的目的。结果表明,‘绿岭1号’薄皮核桃在60~90℃梯度升温烘烤条件下,干燥时间、氧化程度均明显低于其他烘烤方式,并且产品质量良好。因此‘绿岭1号’薄皮核桃的最佳烘烤条件是60~90℃梯度升温,其次是持续80℃烘烤。     

双孢蘑菇贮藏条件对其生理生化变化影响的研究进展

贮藏条件是影响双孢蘑菇贮藏效果的重要因素,介绍了气体成分、温度和湿度等因素对双孢蘑菇生理生化变化的影响。     

离心泵叶轮内变工况三维湍流数值模拟

采用工程上广泛使用的标准k—ε两方程湍流模型，对离心泵最佳工况和大流量工况、小流量工况进行了叶轮内部流动的数值模拟，对3种工况下叶轮内的相对流动、径向流动及切向流动进行了分析，探讨了轴向旋涡的特征、叶片流道的挟持约束作用、叶片流道内的压力分布与流量的关系等流动特性。     

Logging pattern and landscape changes over the last century at the boreal and deciduous forest transition in Eastern Canada

Forestry practices associated with the industrial era (since ~1900) have altered the natural disturbance regimes and greatly impacted the world’s forests. We quantified twentieth century logging patterns and regional scale consequences in three sub-boreal forest landscapes of Eastern Canada (117,000, 49,400 and 92,300 ha), comparing forestry maps depicting age and forest cover types for early industrial (1930) and present-day (2000) conditions. Results were similar for the three landscapes, indicating large-scale forest change during the twentieth century. In 1930, previous logging activities had been concentrated in the lowlands and along the main hydrographical network, as compared to a more even distribution over the landscapes in 2000, reflecting a decreasing influence of the environmental constraints on forest harvesting. In 1930, old-aged forests (>100 years) accounted for more than 75% of the unlogged areas of the three landscapes, as compared to less than 15% for the present-day conditions. Logging practices have thus inverted the stand age distribution of the landscapes that are currently dominated by young and regenerating stands. The 1930 forest cover types showed a clear relationship with elevation, with conifers located in the lowlands and mixed and deciduous stands restricted to the upper slopes. Between 1930 and 2000, 58–64% of the conifer areas transformed to mixed and deciduous forests, such that no clear altitudinal relationships remained in 2000. We conclude that twentieth century logging practices have strongly altered the preindustrial vegetation patterns in our study area, to the point that ecosystem-based management strategies should be developed to restore conifer dominance, altitudinal gradients, as well as the irregular structure inspired from old forest stands.     

Effects of Pre-Stratification Storage Conditions on Black Walnut Seed Post-Stratification Germination Capacity

The objective of this work was to quantify changes in the germination capacity of Juglans nigra seeds following storage and then artificial stratification. Seeds were stored at 5 and –20 °C under 5% and 14% internal moisture content (IMC) for 0, 8, 10, and 12 months under conditions with oxygen or under vacuum. Germination percentage (GP) was affected by storage temperature, IMC, and storage period. Seeds stored with 5% IMC succeeded in germinating regardless of the temperature. Seeds stored with 14% IMC did not germinate (–20 °C) or germinated during storage (5 °C). The GP was reduced with the time of storage in seeds at –20 °C and 5% IMC and this effect was avoided in storage under vacuum. In conclusion, the germination capacity of black walnut seeds did not change for up to 12 months at low above-zero temperature and low IMC (5 °C, 5% IMC), being the most cost-effective alternative for long-term storage of black walnut seeds in commercial nurseries. Vacuum storage avoided the decrease of around 50% in average germination capacity of seeds stored for a year at –20 °C.     

斜流泵小流量工况压力脉动数值模拟与实验

基于标准的Smagorinsky亚格子尺度模型,对斜流泵全流场进行大涡模拟并结合压力脉动实验对小流量工况下的压力脉动和内部流场进行研究。实验结果表明,叶轮进口处的脉动幅值最高,随着流量的降低压力脉动幅值逐渐增加,不同工况下叶轮进口、叶轮出口、导叶进口的压力脉动主频为叶频,但导叶出口脉动主频随着流量的变化而变化。大涡模拟表明,0.8Qopt工况下叶轮进口流动状态较好,叶轮进口轴面速度变化较小,而在0.4Qopt工况下叶轮进口流动状态较复杂,轴面速度变化较大,0.4Qopt工况时叶轮进口冲角增加以及受到相邻叶片叶顶泄漏流的影响,在t*=0.041 6时叶片进口吸力面已发生流动分离,当叶轮从t*=0.041 6旋转到t*=0.124 9时,叶片吸力面流动分离加剧,轮缘处的轴面速度明显升高,同时分离涡的旋转强度也逐渐增强,导致该区域的静压下降,逆压梯度上升,促使回流的产生,当回流到达叶片进口时进口处的静压逐渐恢复,因此叶轮进口流动分离是引起叶轮进口压力脉动幅值增加的重要因素。