WEPP模型中的CLIGEN与BPCDG应用对比研究

通过对遂宁组紫色土产流、产沙侵蚀的观测,运用迄今为止最为复杂的土壤侵蚀预测模型WEPP模型进行单次降雨侵蚀预测,与实测值比较,并对比通过气候生成器CLIGEN和断点生成器BPCDG的产生的气候参数对预测值的影响。通过分析比较结果,认为WEPP模型对遂宁组紫色土侵蚀过程预测合理,而且利用断点生成器BPCDG的预测结果要优于气候生成器CLIGEN的预测结果。     

Re-defining tillage erosion: quantifying intensity–direction relationships for complex terrain

Abstract. Current tillage erosion models account for the influence of tillage direction in the magnitude of the soil (tillage) transport coefficient. It is argued here that this is counter-intuitive and causes significant problems in modelling tillage erosion in areas of complex terrain. This article examines whether a re-modelling of tillage erosion is possible that separates tillage direction (an interaction with the landform) from the soil transport coefficient (a measure of tillage intensity representing the combination of implement erosivity and soil erodibility). Experimental data for mouldboard ploughing upslope, downslope and cross-slope at Coombe Barton Farm, Devon are examined. Integration of data for all directions into a single relationship, which relates translocation in the direction of tillage to slope in the direction of tillage and translocation perpendicular to tillage to slope perpendicular to tillage, is not possible using previously published methods of analysis. However, when total translocation distance is regressed against the tangent of the slope at 45° to the tillage direction (bisecting the tillage direction and the direction of overturning) it is found that a single relationship can be used to describe tillage in all three directions. Therefore, this relationship is used to determine a single value of the soil transport coefficient ( k _fTa) for constant soil and implement conditions but different tillage directions. This redefinition of tillage is important both for true estimation of tillage erosion severity, the adirectional coefficient being 40% larger than the directional coefficient, and for modelling of tillage erosion in complex terrain. These improvements are vital when tillage erosion simulation is used to direct soil conservation strategies.     

绵羊实验性乳酸酸中毒研究——Ⅲ.肾功能和尿液的改变

将12只2～3岁健康绵羊分为Ⅰ组(3只)、Ⅱ组(6只)和Ⅲ组(3只),分别按2.5,5.0,10.0 g/kg体重的剂量,向瘤胃内注入50%D—L消旋体乳酸溶液,各处理组均出现酸中毒症状.乳酸酸中毒时,肾脏的损伤程度与瘤胃内注入乳酸的剂量水平有关.各处理组瘤胃内注入乳酸后,尿素氮显著升高.第Ⅰ组尿液pH下降迅速,恢复亦快;第Ⅱ组尿液pH下降和回升均较缓慢,而且出现大量蛋白质和血液;第Ⅲ组尿液除见第Ⅰ、Ⅱ组的变化外,还出现肌红蛋白、酮体和尿胆素原.     

哈尔滨市工农兵钢箱索梁桥模型试验研究

对哈尔滨市工农兵钢箱索梁桥的模型进行了试验和分析。结果表明,该桥设计采用的理论与试验结果基本相符,为桥梁的修复设计提供了可靠依据。     

菌根生物技术应用现状与研究进展

论述了菌根的类型、功能及其在林业上的应用现状，并指出菌根生物技术研究进展与方向，为林业生产提供参考。     

Analysis of a Long-term Experiment with Repeated-measurement Models

Long‐term experiments are a classical case of repeated measurements. Traits are measured on the same experimental unit over many years so that correlations arise between the observations made on the same plot in consecutive years. This paper describes the analysis of a three‐crop‐rotation long‐term experiment. We analysed the yields of the crops and the organic carbon content in the topsoil over 30 consecutive years. Several variance–covariance approaches are discussed and the trait‐specific best fit is interpreted. Mixed models are used to describe the structure of the experiment. Both yields and soil organic carbon show a more or less pronounced variance heterogeneity. Especially for yields, the heterogeneity of cycles and years is dominant. The consideration of correlations results in a better model fit in all cases.     

浅谈建立郑州市道路路面养护管理系统

路面管理系统是通过对路面运行状况、使用性能、使用周期、进行对比、分析，预测路面管理的最佳养护预算投资并在最佳养护经济投资条件等各种因素限制下，寻求道路养护管理最佳战略决策。     

日粮锌、硒水平对肉鸡肠道黏膜屏障结构的影响

为了探讨微量元素锌和硒相互作用对肉鸡肠道黏膜屏障结构的影响，将24只1日龄AA肉鸡随机分3组，分别饲喂添加有高锌高硒(锌1000mg／kg、硒5mg／kg)、低锌低硒(锌34mg／kg、硒0．08mg／kg)或常锌常硒(锌50mg／kg、硒0．15mg／kg)的日粮45d后，观察肠黏膜上皮细胞、上皮内淋巴细胞和盲肠扁桃体的形态结构变化。结果表明：高锌高硒或低锌低硒组肉鸡的肠黏膜结构有明显的损伤，表现为肠黏膜上皮细胞萎缩，绒毛长度下降，上皮内淋巴细胞数量减少；盲肠扁桃体的弥散淋巴组织和淋巴小结中，淋巴细胞数量减少，细胞出现肿胀，有的核消失，结缔组织增生，淋巴小结萎缩。尤其是高锌高硒组的损伤最为严重。而常锌常硒组肉鸡肠黏膜和盲肠扁桃体的形态结构正常。结论：日粮中按锌50mg／kg、硒0．15mg／kg的比例添加，对于维持肠道黏膜的正常屏障结构是合适的。过高或过低的锌和硒对小肠黏膜有毒性作用，破坏其屏障功能；而且高锌和高硒可相互促进以增强其毒性作用。     

胶合板厂生产规划模型与运用

本文根据胶合板厂实际情况，建立了杨木胶合板厂生产规划模型。该模型考虑各主要设备工段、产品组合、产品混合、产品价格、流动资金、原材料供应以及市场约束等问题。本模型能够满足市场竞争，获取最佳利润，同时还能解决胶合板厂“三板”（表、背、芯单板）不平衡问题。