发动机曲轴的损伤及修复

介绍了发动机曲轴的运行环境,分析了发动机曲轴的损伤形式、损伤部位及特点,简述了曲轴技术状况的检查方法.针对发动机曲轴的损伤程度和不同的损伤类型,给出了修理尺寸法、堆焊、电弧喷涂、电刷镀和手工电弧焊修复工艺,并对堆焊和电刷镀修复工艺进行了详尽地介绍和分析.     

Cover crop evapotranspiration under semi-arid conditions using FAO dual crop coefficient method with water stress compensation

Cover cropping is a common agro-environmental tool for soil and groundwater protection. In water limited environments, knowledge about additional water extraction by cover crop plants compared to a bare soil is required for a sustainable management strategy. Estimates obtained by the FAO dual crop coefficient method, compared to water balance-based data of actual evapotranspiration, were used to assess the risk of soil water depletion by four cover crop species (phacelia, hairy vetch, rye, mustard) compared to a fallow control. A water stress compensation function was developed for this model to account for additional water uptake from deeper soil layers under dry conditions. The average deviation of modelled cumulative evapotranspiration from the measured values was 1.4% under wet conditions in 2004 and 6.7% under dry conditions in 2005. Water stress compensation was suggested for rye and mustard, improving substantially the model estimates. Dry conditions during full cover crop growth resulted in water losses exceeding fallow by a maximum of +15.8% for rye, while no substantially higher water losses to the atmosphere were found in case of evenly distributed rainfall during the plant vegetation period with evaporation and transpiration concentrated in the upper soil layer. Generally the potential of cover crop induced water storage depletion was limited due to the low evaporative demand when plants achieved maximum growth. These results in a transpiration efficiency being highest for phacelia (5.1 g m⁻² mm⁻¹) and vetch (5.4 g m⁻² mm⁻¹) and substantially lower for rye (2.9 g m⁻² mm⁻¹) and mustard (2.8 g m⁻² mm⁻¹). Taking into account total evapotranspiration losses, mustard performed substantially better. The integration of stress compensation into the FAO crop coefficient approach provided reliable estimates of water losses under dry conditions. Cover crop species reducing the high evaporation potential from a bare soil surface in late summer by a fast canopy coverage during early development stages were considered most suitable in a sustainable cover crop management for water limited environments.     

液压挖掘机铲斗机构的动力分析

液压挖掘机铲斗机构可视为驱动力矩随时间变化的铰链四杆机构。分别用拉格朗日方程和质量凝聚法对其进行了动力分析，为设计者分析、决策和控制提供了计算依据，对于计算机求解具有普遍意义。     

农田优化灌溉动态管理基本程序与方法研究

从土壤———作物———大气连续体角度出发 ,利用田间试验资料和气象资料 ,分析了影响优化灌溉方案制定的有关因子 ,确定出春小麦、春玉米不同生长阶段土壤水分控制下限标准 ;在土壤水分平衡理论的基础上 ,建立了时域滚动预报灌溉日期的方法 ;并以春小麦、春玉米农田为例进行了检验 ,结果比较理想     

闸门的优化设计

用平面体系的方法进行结构分析，对排灌机械中平面钢闸门的面板－梁格体系的优化设计进行了探讨，用边界搜索法将有约束优化问题转换为无约束优化问题，给出了优化设计程序框图进行实例理论验证，结果表明，彩本文介绍的优化方法设计，闸门的叶体积可减小２０％左右。     

灯泡贯流式水轮发电机定子三维温度场的研究

建立了发电机定子三维温度场计算的数学模型，以水轮发电机的半齿、半槽为计算区域，用有限元方法对5500kW／6471kVA灯泡贯流式发电机定子的温度场进行了求解，得到了发电机定子的温度场、各部件温度最高点及分布。通过求解定子机座和定子轭部的体平均温度，为机组的设计提供参考。     

水泵用新型单相感应电动机仿真研究

作为三相感应电动机单相运行的一种特殊接线方式，与三相感应电动机在三相对称电源上运行相比，SEMIHEX接线方式具有更高的功率因数和效率，其起动转矩较低，非常适用于微型水泵用电动机。为便于该电机的推广使用。本文建立了SEMIHEX接线方式电动机的动态仿真数学模型，然后对其起动过程进行了仿真计算，计算结果与试验结果较吻合。     

Effects of planting density on the productivity and water use of tea (Camellia sinensis L.) clones: I. Measurement of water use in young tea using sap flow meters with a stem heat balance method

Sap flow meters based on the stem heat balance method were used to measure the mass flow rates or water use in young potted tea (Camellia sinensis L.) plants of clones AHP S15/10 and BBK35. The meters were constructed on site and installed onto the stem or branch sections of field growing plants in an experiment originally designed to study the effects of plant population density and drought on the productivity and water use of young tea clones. The objective of the study was to use the SHB method as a first attempt to use sap flow meters for determining the water use of young tea growing in the field under well watered conditions in Tanzania. The results are reported and recommendation made for further work on using the technique.     

灌溉水利用系数综合测定法实例分析

灌溉水利用系数是衡量农业节水效果的关键指标。目前各地区统计出的灌溉水利用系数差异极大。很多数据明显的存在错误，难以作为比较与衡量的标准。影响灌溉水利用系数正常测定的主要原因是传统测定方法存在测定工作量巨大、测定条件难以保证等。通过开展对灌溉水利用系数资料的搜集、整理并对灌区进行实地调研，在了解目前灌区灌溉水利用系数测量中存在问题及原因的基础上，对灌区灌溉水利用系数测量计算方法进行了分析研究，提出了测定灌溉水利用系数的综合测定计算方法。该方法既克服了传统测量方法中工作量大，需要大量人力、物力才能完成的缺点，又弥补了只测量典型渠段而引起较大误差的不足，而且能反映出灌区渠系用水情况、灌溉工程质量及灌溉用水管理水平等。以漳河灌区为例进行了应用分析。     

水化学分析方法在水电工程勘探中

水电工程有限的勘察及水文地质钻探仅能获取少量水文地质信息，而在工程勘察特别是平硐中，易取得出水点的水样，通过水化学分析可以获得更多的水文地质资料。通过对四川省自一里水电站平硐出水点水化学样的系列采集和测试，运用水化学成分离子比例分析法、灰色关联分析法和D、18O同位素分析等多种方法提取了平硐区水文地质信息，分析了山区平硐裂隙水的来源、补给高度及岩层渗透性等水文地质特征，探讨了水化学分析方法在分析水电工程水文地质条件中的应用。