三维复合材料复合裂纹特殊边界元法

利用两相复合材料位移基本解，将受复合载荷作用下复合材料三维裂纹问题，归为求解一组超奇异积分方程，并分析了对裂纹尖端应力奇性和方程组求解理论方法；进而以反映裂纹前沿应力奇性的密度函数基本解表示位移间断，根据Taylor积分及其特征展开特性，给出方程组数值求解方法；最后，以三维矩形裂纹为例，讨论了应力强度因子（SIFs）收敛性及其变化规律。     

复合材料模型分析加筋地基承载力

利用复合材料模型模拟加筋地基，按照土塑性力学分析加筋地基的变形和破坏，并按传统滑移线解法推导出浅基础加筋地基的承载力设计公式，利用实例比较探讨了本文方法与传统极限分析法的优缺点。     

基于遗传算法的泵汽蚀试验数据拟合

文章对标准的遗传算法进行改进，采用了浮点数直接编码方式最优保留策略、算术交叉和非一致性变异算法等方法，并对泵汽蚀试验数据拟合问题进行分析，引入了此改进的遗传算法。最后给出了一组汽蚀试验数据，分析采用常规方法拟合和基于遗传算法拟合。结果说明了本文提出方法的可行性。     

Combining deliberative and computer-based methods for multi-objective land-use planning

This paper reports the outcomes of a deliberative workshop comparing land-use plans proposed by land-manager or domain experts with those derived using a computer-based decision support system (DSS). The DSS integrates four main components, a geographic information system, land-use systems simulation models, impact assessments and land-use planning tools. The land-use planning tools draw on the other components to generate and evaluate alternative patterns of land use and management. Since the land-use planning tools are based on multi-objective genetic algorithms (mGAs) it is possible to generate a range of alternative plans that define the structure of the trade-off between the objectives. The workshop tasked the delegates with specifying land-use plans that achieved the best compromise between two objectives known to be non-commensurable and conflicting. The nature of the best compromise was dependent on their individual perspectives. The delegates proposed allocations both as individuals and in researcher-facilitated sub-groups. The mGA allocations were then compared with those derived by delegates and were found to be broadly similar in performance. Differences in the range of allocations considered feasible were explained by the hard and soft constraints on allocations agreed between the delegates and articulated within the workshop process. The hypothesis that part of the difference in performance between the mGA and delegate allocations was due to the delegates blocking together fields with the same land use for convenience of management was proved. The analysis of the group allocations revealed that the decision-making process had failed to improve on the individual allocations. From these results it was concluded that there was a potential role for mGA based land-use planning tools in researching into, and deliberating on, the possible impacts of policy or other factors affecting land-use systems. It was further concluded that the tools should not be used in isolation since there was the need for stake-holder inputs to adequately define the range of feasible and practical land-use plans.     

Inverse Modeling to Quantify Irrigation System Characteristics and Operational Management

Remotely sensed (RS) data is a major source to obtain spatialdata required for hydrological models. The challenge for thefuture is to obtain besides the more direct observable data(landcover, leaf area index, digital elevation model andevapotranspiration), non-visible data such as soilcharacteristics, groundwater depth and irrigation practices.In this study we have explore the option of using inversemodeling to obtain these non-RS-visible data. For a commandarea in Haryana, India, we applied for the 2000–2001 rabiseason a RS-GIS-combined inverse modeling approach to derivenon-RS-visible data required in the regional application ofhydrological models. A Genetic Algorithm loaded stochasticphysically based soil-water-atmosphere-plant model (SWAP) wasdeveloped for the inverse problem and used in the study. Theresults showed good agreement with the inventoried data suchas soil hydraulic properties, sowing dates, groundwaterdepths, irrigation practices and water quality. The deriveddata could be used to predict the state of the system at anytime in the cropping season, which can be used to evaluateoperational management strategies.     

沼气池发酵原料配比及快速启动技术探讨

本文对沼气池发酵原料的配比、预处理、发酵微生物、浓度、CN比、pH值、温度等七个主要因素作了定量试验研究,并提出了较为合理的配方比例和沼气池快速启动的方法.     

遗传算法在离心泵叶片优化设计中的应用

对遗传算法在流体机械优化设计中的应用现状作了较为全面的总结；提出了将遗传算法应用于离心泵叶片优化设计中，分析了遗传算法在离心泵优化设计中应用的可行性以及存在的问题；对离心泵优化设计的发展提出了一些新建议和尝试。     

BMC材料气门罩壳的振动分析

在内燃机表面噪声中,气门罩壳是主要的噪声源之一.将BMC材料用于气门罩壳,采用有限元方法对其进行模态分析和谐响应分析,并与铸铝罩壳进行了比较,计算结果表明,BMC材料用于气门罩壳具有减振、降噪的作用.     

回转筒内秸秆碎料回转周期和料层完全混合时间研究

基于试验和理论分析,研究了回转筒型固态发酵罐内秸秆粉碎料的料床回转周期,建立了数学模型,其计算准确度达95%以上;结合图像分析法和料床回转周期,发现筒内上下料层完全混合时料层所转圈数与筒体转速关系不大,与筒内料体积填充率呈线性关系。由此回归并推导出只需知道筒内料体积填充率和筒体转速,便可预测上下料层完全混合的公式,其计算准确度达90%以上。提出了以上研究成果在工业级发酵罐中应用的方法。     

对两个材料力学问题的探讨

在材料力学中,对铸铁试件的轴向压缩破坏一般都认为破坏断面与杆件横截面成45°角;在材料的应力分析上,只对平面应力状态进行研究,对三角形单元的应力研究轻少。为此分别采用实验方法和分析法,对上述两个问题进行探讨。其实验结果是:铸铁试件的压缩破坏一般在55°左右,考虑内摩擦力的影响后,得到了很好的理论解释;而对三角形单元的应力分析,用应力圆法求解简单方便。对这两个问题的研究,将有助于材料力学的应用与发展。