氮在凋落物-土壤界面连续体转移研究进展

凋落物-土壤界面连续体是森林生态系统的最重要部分,也是氮素生物地球化学循环最活跃的场所。土壤氮元素的生物地球化学循环广义上可分为转运和转化2个环节,真菌和细菌分别在这2个环节上扮演重要角色。降雨、氮沉降和温度等变化能够改变森林生态系统的氮生物地球化学循环过程,在全球变化加剧背景下,深入了解凋落物-土壤界面连续体内氮的转运和转化过程和机制尤为重要。本文综述了凋落物-土壤界面连续体的研究现状,通过应用N示踪、分子生物学测序和N-DNA-SIP分子探针技术,研究氮转运和转化的微生物群落及其过程的可行性,并提出今后森林生态系统凋落物-土壤界面连续体的氮循环模式,强调了真菌的转运和细菌的转化过程在氮固持中的贡献,有助于森林生态系统氮固持力和机制系统认知,为开展温带森林生态系统管理和氮排放控制提供了思路。      

基于热交换的漂浮育苗温室除湿系统研究

基于热力学第二定律,设计了热交换式漂浮育苗温室保温除湿系统。该系统主要由热交换换气机和环境监控系统组成,通过将温室大棚外新风与棚内空气强制对流交换进行换气除湿,使新风温度升高,实现温室热能回收。环境监控系统可现场和远程了解温室大棚内部环境和除湿系统工作状态,实时自动对温室湿度进行调控。将系统应用于烟草漂浮育苗温室,运行结果表明,系统具有良好的保温、除湿能力,试验大棚较对照大棚平均相对湿度降低6.7%,系统平均热回收效率为59.35%,烟苗平均茎高增加0.4 mm、茎围增加0.6 mm。     

活塞-缸套周期性瞬态传热仿真

为解决计算柴油机单个零部件传热时边界条件难以确定的问题,用耦合传热的方法,把活塞、缸套传热时的外边界条件变成内边界处理,利用有限元软件进行建模仿真。以X6130型柴油机为例,用有限元分析软件ANSYS建立了活塞-缸套的三维模型,并对其额定工况下一个工作循环内的瞬态传热进行了仿真计算,得到了活塞-缸套上关键点的温度波动曲线。部分计算结果和实验结果对比表明：用耦合方法模拟活塞-缸套之间的传热过程是可行的,且仿真结果与实测数据吻合较好。     

板翅换热器平直翅片的传热与阻力性能试验

对11种不同结构参数的紧凑式板翅换热器平直翅片的传热和流动阻力进行了试验研究,分析比较平直翅片间距、翅片高度、翅片长度对其传热和流动阻力的影响。结果表明,翅片间距对传热和流动阻力影响较小,而翅片长度和高度对其传热和流动阻力有重要影响。同时对11种翅片的220个试验数据点进行了j因子和f因子的试验关联式拟合,拟合关联式的误差范围为±10%。     

复合式分离型热管在原油采出液余热回收中的应用

通过蒸汽辅助重力泄油(Steam Assisted Gravity Drainage,SAGD)技术开采稠油时,采出液温度较高,对其进行热回收的节能潜力较高,油田采用热管式换热器回收采出原油的余热,将其作为工业或生活用热具有研究价值。考虑到现场空间要求和工程设备模块化的特点,利用U形管壳式换热器、螺旋板式换热器作为分离型热虹吸热管蒸发段和冷凝段,并建立复合式分离型热管模型,分析其换热性能、循环压降、充液率及换热能力。采用新疆油田油水二次换热区的分离型热管系统验证该模型,结果表明:复合式分离型热管计算模型可行;复合式热管具备U形管壳式换热器、螺旋板式换热器的优点,换热性能强,系统换热能力可以满足实际要求,有较好的环境适应性。     

农地流转对农业生态效率的影响及作用机制分析

探究农地流转对农业生态效率的影响,对促进中国农地的高效、低碳利用和农业的绿色发展具有重要意义。本文基于2005—2021年的中国省级面板数据,采用SBM模型对各省份农业生态效率进行测度,用固定效应模型、门槛回归模型和中介效应模型实证分析了农地流转对农业生态效率的作用机制,揭示了农地经营规模和农业机械化服务在两者之间的中介作用。结果表明：1）中国农业生态效率在2005—2021年间总体呈上升趋势,但存在地区差异,其中东部地区>西部地区>中部地区;2）农地流转显著提高了农业生态效率,且该影响存在门槛效应,当农地流转面积超过门槛值后,对农业生态效率的正向影响会下降;3）农地流转通过扩大农地经营规模、推动农业机械化服务提高农业生态效率。为提高农业生态效率,本研究建议：加快推动农地流转水平,扩大农地经营规模,推动农业机械化服务,结合区域差异性,重视西部地区的农地流转。     

辽宁省农村土地流转的金融服务探索

随着经济全球化的发展和我国现代化产业结构的不断调整,粮食安全的支撑重要性越发明显,但农村目前的青壮年劳动力却面临主动或被动脱离土地的窘境。如何推动农村土地流转,提升土地利用率,增加农业生产效应,加强其相关金融服务是一项重要有效途径。通过研究,发现辽宁省农村土地流转的金融服务存在一系列的问题,并给出相应的政策建议。     

Temperature modeling of a land-based aquaculture system for the production of Gracilaria pacifica: Possible system modifications to conserve heat and extend the growing season

Temperature control is a major cost for numerous aquaculture systems. Solar thermal engineering techniques can be used to identify inexpensive methods for conserving and capturing heat. Gracilaria pacifica, also known as the culinary ingredient ogo, is currently grown in land-based tanks at a site in Goleta, CA where influent sea water temperatures infrequently reach the 21–28 °C range that provides for optimal growth. The major objective of this study was to explore various designs of a G. pacifica tank culture system that maintain optimal water temperature year round to maximize growth. A model was constructed and calibrated by comparing results to a one-third scale pilot system operated in Davis, CA. For model calibration the most sensitive parameter such as cover optical properties were adjusted first and less sensitive parameters were adjusted later. The pilot system consisted of six tanks, three insulated with foam and a clear polyethylene cover (experimental), and three uninsulated and uncovered (controls). The model had weather data inputs including air temperature, humidity, wind speed, and solar radiation. The model was then compared to a full-scale system operated in Santa Barbara during the winter. The experimental pilot system was 4.93 °C warmer than the control pilot system under optimal weather conditions. The full-scale experimental system was 2.80 °C warmer than the control system under non-ideal conditions. The model demonstrated predictive accuracy under most weather conditions. Furthermore the model is robust enough to accept estimated values for many inputs and still produce accurate results, this suggests a simpler model may be feasible. A polyethylene cover and insulation are not sufficient in general for raising the water temperature to the optimum range during the winter; they may be during other times of the year when more solar energy is available, thereby extending the growing season.     

胚胎冻融技术及其在我国肉羊产业中的应用

胚胎冻融技术可使胚胎移植不受时间、地点的限制，从而达到提高胚胎移植效率的目的，研究和优化胚胎冻融技术对胚胎移植工程的发展具有重要的意义。主要对胚胎冻融技术的原理、特点及其在肉羊产业中的应用情况进行了综述，旨在阐明胚胎冻融技术对我国肉羊产业发展的重要作用。     

Factors Affecting Recipients' Pregnancy,Pregnancy Loss,and Foaling Rates in a Commercial Equine Embryo Transfer Program

During 11 breeding seasons, 351 7- to 10-day-old horse embryos were nonsurgically transferred into recipients that ovulated between 3 and 10 days earlier. Pregnancy rates at 14 and 40 days and foaling rates were 77.8% (273/351), 69.2% (243/351), and 64.4% (226/351), respectively. Pregnancy loss between 14 and 40 days was 11% and between 40 days and delivery was 7%. The transfer of quality grade 3 to 4 embryos resulted in a significantly lower pregnancy rate at 14 days compared with the transfer of grade 1 to 2 embryos (46.2% vs. 79%; P < .05). Eight-day-old embryos resulted in significantly lower pregnancy losses than day 9 or 10 embryos, as occurred for embryos between 400 and 1200 μm compared with embryos <400 μm. Embryos recovered from mares >20 years resulted in a significantly higher pregnancy loss rate than those recovered from younger mares. The same happened for embryos coming from mares affected by reproductive pathologies compared with healthy mares performing sport activity. None of the evaluated parameters influenced recipients' foaling rate significantly.