紫花苜蓿种子吸胀期胚根线粒体AsA-GSH循环对低温胁迫的响应

为探究胚根线粒体抗坏血酸-谷胱甘肽(AsA-GSH)循环响应低温胁迫的抗氧化作用机制,以紫花苜蓿种子为材料,研究了不同温度(10和20℃)处理下发芽特性、不同吸胀时间(6、12和24 h)胚根线粒体AsA-GSH循环酶活性、抗氧化物以及过氧化氢(H₂O₂)含量的变化规律。结果表明,吸胀12和24 h后,10℃处理的胚根线粒体H₂O₂含量高于20℃。吸胀24 h期间,10℃处理的胚根线粒体谷胱甘肽还原酶(GR)活性均低于20℃。吸胀12和24 h后,10℃处理的胚根线粒体抗坏血酸(AsA)含量均低于20℃。10℃条件下吸胀24 h后,与20℃处理相比,胚根线粒体谷胱甘肽(GSH)含量显著降低(P<0.05)。苜蓿种子在10℃条件下吸胀萌发时,主要通过降低AsA-GSH循环中GR、单脱氢抗坏血酸还原酶(MDHAR)、过氧化物酶(POD)活性和AsA、GSH含量,使胚根线粒体内的H₂O₂积累,产生氧化损伤,继而影响种子萌发的正常进程。     

施肥对不同品种麦田CO2通量的影响

为探讨施肥对小麦田间CO2释放量的影响,本研究设计以4个不同施肥水平为主处理,以3个不同年代的主栽品种碧玛1号、烟农15号、山农11号为研究对象,采用封闭式静态暗箱技术,应用LI-6400型便携式光合仪(美国)在作物生长期测定土壤CO2释放量和光合速率。同时测定了环境影响因素土壤温度和水分等。研究结果表明,施肥有利于增加土壤CO2释放量,且中氮处理水平释放量最多;土壤温度和水分对土壤CO2释放量有一定的影响,土温越高,水分越大,CO2释放越多;麦田CO2交换量与小麦根系活性呈正相关。     

粤选1号匍匐翦股颖新品系果岭草坪 夏季性状及高温胁迫效应

粤选1号匍匐翦股颖新品系是丛Penncross建坪的老果岭中分离出的无性系。在广州地区夏季果岭草坪密度、绿叶盖度、叶片老化指数、抗坏血酸含量显著高于原品种Penncross，叶片质膜相对透性低。持续高温(36℃)胁迫下，新品系叶片中游离脯氨酸含量显著增加，而原品种在高温胁迫第3d才开始显著增加，新品系游离脯氨酸含量明显高于原品种；高温胁迫下新品系叶片可溶性蛋白含量增加并高于Penncross，而Penncross在高温胁迫2d后显著下降；新品系匍匐茎可溶性糖含量增加，高温胁迫5d后，Penncross显著高于新品系；新品系匍匐茎淀粉含量显著高于Penncross；高温胁迫对叶片相对含水量和叶绿素含量无明显影响。     

Control Strategy and Simulation Study on NiMH Battery Quick Charging for Regenerative Braking of HEV

Based on the result of NiMH battery performance experiments, changing trend of maximal temperature and difference in temperature of HEV NiMH battery in different SOC and different charging current is analyzed. Considering the working situation of HEV NiMH battery and the theory of battery quick charging, a control strategy for NiMH battery quick charging is described which adapts to HEV regenerative braking system based on Mascc law. By Modeling and simulating the process of NiMH battery quick charging with this strategy, constant voltage charge method and constant current charge method, validates this control strategy.     

Analysis on Longitudinal Cracks and Deflection of the Pre-stressed V-shape Slab Roof Structure

In this paper, the finite element method is used to analyze the behavior of the prestressed V-shape Slab Roof structure, especially the effect of temperature change on the stress of slab. The calculated results indicate that when the temperature changes, the tensile stress at the lower extreme fibers of the flange plate near rib exceeds the tensile strength of concrete subjected to the combined action of triaxial stresses and results in the longitudinal cracks of the flange plate. The deflection analysis is based on the mechanical model of the prestressed V shape slab with the longitudinal cracks. The calculated results are in general agreement with the field observations.     

Artificial Neural Networks Models for Flow Stress during High Temperature Plastic Deformation of Al-Li Alloy

Using gained experimental data to develop the models of stable flow stresses at high temperature plastic deformation by statistical methods for alloy materials, precision of the models is poor and at the same time the processes of modeling are complicated with great workload. On the basis of the data obtained on Gleeble-1500 Thermal Simulator,the predicting models for the relation between stable flow stress during high temperature plastic deformation and deformation strain, strain rate and temperature for 1420 Al-Li alloy have been developed with BP Artificial Neural Network method. The results show that the model on basis of BPNN is practical and it reflects the real feature of the deforming process. It states that the difference between the real value and the output of the model is in order of 5 percent.     

Numerical Simulation of Flow field and Temperature field in Combustion Chamber Widened Suddenly

The flowfield and temperature field are numerically Simulated by the mathematical model of the fluid flow and heat transfer in circular combustion chamber widened suddenly. The distributions and influence factors of the flow field and temperature field are studied in it. The results have the guiding significance for the design of combustion chamber. The mathematical models can serve as the quantitative analysis methods for design.     

Recommendations on Shrinkage and Temperature Reinforcements in Concrete Slabs

The mechanism of shrinkage cracking is discussed with a simple member, which is fully restrained and subjected only to an axial restraining force caused by shrinkage, while a simple procedure is presented for the determination of the number and spacing of the cracks and the average crack width. With the simple model, some examples are shown to compare the provisions for minimum shrinkage and temperature reinforcement in GB 50010-2002 Code, ACI 318-02 Code and AS 3600-1988 Code. The results show that the provisions in GB 50010-2002 Code are too weak in comparison with the others. Finally, some recommendations are proposed.     

EFFECT OF MICRO-GALLIUM ON THE INTERGRANULAR SEGREGATINN OF PHOSPHORUS IN CARBON STEELS

The effect of small amounts of gallium on the intergranular segregation of phosphorus in carbon steels is discussed, with the help of the impact test, fracture morphology and micro-structure analyses, combined with composition analysis on the fracture surfaces by Auger electronspectrometer. The results show that gallium in the steel with a content of gallium more than ten thou-sandth can suppress, to some extent, the intergranular segregation of phosphorus and retard the tempering process. As a result, the temper embrittlement of the steel disappears and the embrittlement transition temperature declines.