The Particle Properties of Panzhihua Vanadium-Bearing Titanomagnetite Concentrate

In order to investigate how to increase the concentrate sintering productivity,the particle properties of the concentrate have been studied. It was found that the essential reasons for low sintering productivity are the difficulties to pelletize and poor permeability because of particle' s size bigger,smooth surface, poor activity and hydrophobe.     

Study on Analysis Methods for Rock Slope FoundationStability of the Highrise Building

Based on the practical project a study on analysis methods for rock slope foundation stability of highrise-building project criterion transfer coefficient method, rotation limit equilibrium method (Sweden slices method) and finite element method was carried out.The authors found that safety factor of criterion transfer coefficient method is larger than that of rotation limit equilibrium method, but is similar to the results of finite element method. So, when rockslope foundation stability of highrise building is to be analysed,the rotation limit equilibrium method is suggested to use.     

水重力式马铃薯静摩擦因数测定仪设计与试验

针对传统斜面法测定马铃薯静摩擦因数存在工作效率、精度较低等问题,提出水重力式马铃薯静摩擦因数测定原理,通过精确控制水的重力来确定马铃薯的静摩擦力,进而计算静摩擦因数,据此设计了马铃薯静摩擦因数测定仪。对甘肃省普遍种植的陇薯10号品种进行静摩擦因数测定。结果表明：带土马铃薯与钢板之间的静摩擦因数为0.420,与塑料板之间的静摩擦因数为0.496,马铃薯之间静摩擦因数为0.442;不带土马铃薯与钢板之间的静摩擦因数为0.455,与塑料板之间的静摩擦因数为0.526,马铃薯之间的静摩擦因数为0.483。由此可见,带土马铃薯的静摩擦因数较不带土马铃薯小,静摩擦因数从大到小依次为：马铃薯与塑料板之间、马铃薯之间、马铃薯与45号钢板之间。为进一步验证重力法的可靠性,进行马铃薯坍塌堆积角仿真和试验。结果发现：重力法条件下不带土马铃薯形成的堆积角与试验结果较接近,其相对误差为1.04%,斜面法条件下不带土马铃薯形成的堆积角与试验结果相对误差为7.73%;斜面法条件下带土马铃薯形成的堆积角与试验结果较接近,其相对误差为0.37%,重力法条件下的堆积角与试验结果的相对误差为4.31%。重力法可以测定马铃薯...     

秸秆旋埋还田后空间分布效果仿真与试验

对传统旋耕机(TR)、秸秆旋埋还田机(SR)和深松+秸秆旋埋还田机(SSR)进行了秸秆还田离散元仿真和田间试验对比。通过设计的秸秆三维坐标测量装置对秸秆在土壤中的空间坐标进行了测量,并在三维绘图软件中还原了秸秆在土壤中的空间状态,及秸秆在三维图中量化及可视化显示。对取样立方体进行分层、横向及纵向划分等探究了秸秆在土壤中垂直分布及水平分布的均匀性。利用离散元软件建立了相应的仿真模型,并与田间试验设定了相同的作业参数,在仿真作业完成后,通过设置不同尺寸的Geometry Bin计算区域内秸秆数量,并分别对应实际田间作业的分层、横向和纵向划分。在分层处理中,仿真与实测结果表明,SR和SSR埋入土壤中的秸秆量都明显大于TR,尤其是埋入土壤下层的秸秆量均是TR的数倍。TR、SR和SSR作业后各层秸秆占比仿真值和实测值的变异系数均呈递减趋势,其中SSR的变异系数最小,分别为28. 8%和28. 7%。3种耕作装备下仿真值与实测值的变异系数相差不大,平均误差为9. 6%。横向和纵向划分中,TR、SR和SSR的各区域秸秆占比仿真值和实测值的变异系数无绝对规律,SSR的变异系数均最小。离散元仿真和田间试验结果表明,SSR秸秆还田后,秸秆在土壤中垂直分布和水平分布的均匀性均最优。离散元仿真较好地拟合了实际田间作业后秸秆的空间分布状态,相对误差在可接受范围内。     

低压管道环状管网水力计算

本文对环状管网运行中仅开启一个出水口的水力计算方法进行了探讨。计算出了特征长度系数、平均特征长度系数和最大特征长度系数,并将其排成数表供直接查用。同时计算出了双环管网平均和最大特征长度系数的回归方程,经比较,本文提出的计算方法简单、可靠,便于设计中应用。     

Simulation of transpiration, drainage, N uptake, nitrate leaching, and N uptake concentration in tomato grown in open substrate

Free-drainage or “open” substrate system used for vegetable production in greenhouses is associated with appreciable NO₃⁻ leaching losses and drainage volumes. Simulation models of crop N uptake, N leaching, water use and drainage of crops in these systems will be useful for crop and water resource management, and environmental assessment. This work (i) modified the TOMGRO model to simulate N uptake for tomato grown in greenhouses in SE Spain, (ii) modified the PrHo model to simulate transpiration of tomato grown in substrate and (iii) developed an aggregated model combining TOMGRO and PrHo to calculate N uptake concentrations and drainage NO₃⁻ concentration. The component models simulate NO₃⁻-N leached by subtracting simulated N uptake from measured applied N, and drainage by subtracting simulated transpiration from measured irrigation. Three tomato crops grown sequentially in free-draining rock wool in a plastic greenhouse were used for calibration and validation. Measured daily transpiration was determined by the water balance method from daily measurements of irrigation and drainage. Measured N uptake was determined by N balance, using data of volumes and of concentrations of NO₃⁻ and NH₄⁺ in applied nutrient solution and drainage. Accuracy of the two modified component models and aggregated model was assessed by comparing simulated to measured values using linear regression analysis, comparison of slope and intercept values of regression equations, and root mean squared error (RMSE) values. For the three crops, the modified TOMGRO provided accurate simulations of cumulative crop N uptake, (RMSE = 6.4, 1.9 and 2.6% of total N uptake) and NO₃⁻-N leached (RMSE = 11.0, 10.3, and 6.1% of total NO₃⁻-N leached). The modified PrHo provided accurate simulation of cumulative transpiration (RMSE = 4.3, 1.7 and 2.4% of total transpiration) and cumulative drainage (RMSE = 13.8, 6.9, 7.4% of total drainage). For the four cumulative parameters, slopes and intercepts of the linear regressions were mostly not statistically significant (P < 0.05) from one and zero, respectively, and coefficient of determination (r²) values were 0.96-0.98. Simulated values of total drainage volumes for the three crops were +21, +1 and −13% of measured total drainage volumes. The aggregated TOMGRO-PrHo model generally provided accurate simulation of crop N uptake concentration after 30-40 days of transplanting, with an average RMSE of approximately 2 mmol L⁻¹. Simulated values of average NO₃⁻ concentration in drainage, obtained with the aggregated model, were −7, +18 and +31% of measured values.     

Determination of growth-stage-specific crop coefficients (Kc) of cotton and wheat

Development of crop coefficient (Kc), the ratio of crop evapotranspiration (ETc) to reference evapotranspiration (ETo), can enhance ETc estimates in relation to specific crop phenological development. This research was conducted to determine growth-stage-specific Kc and crop water use for cotton (Gossypium hirsutum) and wheat (Triticum aestivum) at the Texas AgriLife Research field at Uvalde, TX, USA from 2005 to 2008. Weighing lysimeters were used to measure crop water use and local weather data were used to determine the reference evapotranspiration (ETo). Seven lysimeters, weighing about 14 Mg, consisted of undisturbed 1.5 m × 2.0 m × 2.2 m deep soil monoliths. Six lysimeters were located in the center of a 1-ha field beneath a linear-move sprinkler system equipped with low energy precision application (LEPA) and a seventh lysimeter was established to measure reference grass ETo. Crop water requirements, Kc determination, and comparison to existing FAO Kc values were determined over a 2-year period on cotton and a 3-year period on wheat. Seasonal total amounts of crop water use ranged from 689 to 830 mm for cotton and from 483 to 505 mm for wheat. The Kc values determined over the growing seasons varied from 0.2 to 1.5 for cotton and 0.1 to 1.7 for wheat. Some of the values corresponded and some did not correspond to those from FAO-56 and from the Texas High Plains and elsewhere in other states. We assume that the development of regionally based and growth-stage-specific Kc helps in irrigation management and provides precise water applications for this region.     

滑阀节流槽阀口的流量控制特性

提出以节流槽内节流面的串并联效应确定二节矩形节流槽阀口面积的原则,推导出阀口面积的计算公式并编制了阀口面积的计算程序;在此基础上对二节矩形节流槽的流量特性进行了试验,试验表明二节矩形节流槽阀口的流量系数是单节矩形槽阀口流量系数的组合,流量系数在阀口开度较小或接近全开时流量系数快速增大,在阀口开度中间区段流量系数较小,在二节节流槽的交界处流量系数增大,流出节流槽方向的流量系数比流入方向约大0.1;提出了反映节流槽阀口流量控制特性的参数阀口流量面积Aq,阀口流量面积为阀口面积和流量系数的耦合函数,与阀口面积及流量系数传统概念相比,阀口流量面积更加合理地表征了阀口几何面积和阀口形状对流量的控制作用.     

插入式地下滴水器的研制与水力性能试验分析

在对现有滴头、滴箭等产品结构改进与优化设计的基础上,研制开发出一种具有快速装拆、移动灵活、抗堵塞功能的插入式地下滴水器产品,通过产品的具体结构组成与工作原理分析,进行了其流量均匀性、压力-流量关系的试验研究,结果表明:插入式地下滴水器所需起始工作压力低,额定流量小,具有较稳定的水力性能,适合用于对缺水区非密植作物的补充性抗旱灌溉,起到提高设备利用率、有效降低灌溉系统投资的作用,且能成功地把地表滴灌转化为地下滴灌的应用模式.     

不同水肥模式的水稻叶面积修正系数试验研究

叶面积修正系数直接决定着长宽修正系数法测量叶面积的精确程度.为探讨水肥模式对水稻叶面积修正系数的影响,基于水稻实测叶面积及叶片长、宽数据计算叶面积修正系数,并分析其变化规律.结果表明,各处理生育前期水稻叶面积修正系数接近或超过经验值0.75,中期较小,抽穗开花期略有上升并稳定至0.7左右.常规灌溉处理上层叶片叶面积修正系数较控制灌溉大,叶片更加细长.不同肥料处理中,控释肥处理叶面积修正系数普遍偏低;常规肥及实地肥处理在生育前期可以采用经验值进行叶面积计算;抽穗开花及以后各生育期,各处理均可采用相同的叶面积修正系数;生育中期各处理叶面积修正系数较低.