胶合板用改性脲醛树脂的调制与应用

分别就改性脲醛(UF)树脂的调胶pH值以及面粉加量对胶液胶合性能的影响进行讨论.结果表明,随着pH值降低,胶合强度和预压强度增大,固化时间和适用期缩短,甲醛释放量降低;面粉用量增大对胶液粘度影响显著,对胶合强度、甲醛释放量有不利影响,但可改善预压性能.综合考虑生产实际,以pH值4.5和面粉加量20%为宜.     

低毒脲醛树脂固化物的甲醛释放

对不同固化体系下三种低毒脲醛树脂固化物随环境变化的甲醛释放量进行了具体研究。试验结果表明:固化体系不同,脲醛树脂的甲醛释放量有很大差别。随着温度的升高,甲醛释放量明显增加;随着时间的变化,脲醛树脂固化物的甲醛释放量逐渐减少,第5天以后逐渐趋于稳定。用三聚氰胺进行改性的脲醛树脂的甲醛释放量明显低于未加任何改性剂的脲醛树脂。     

我国旅游业碳排放测算方法构建与实证研究——基于投入产出视角

按照旅游业碳减排的测定—减排—补偿三步走的逻辑主线,旅游业碳排放的计量是旅游业节能减排的第一步,也是关键一步。以生命周期评价理论和投入产出分析方法为基础,结合国民经济核算体系、旅游卫星账户、环境经济综合账户等经济与环境计量技术,构建自上而下的旅游业碳排放计量方法体系,并实证计量了2002年我国旅游业碳排放量。研究发现,2002年我国旅游业碳排放总量为135.90 Mt,占我国所有产业碳排放总量的3.95%,占我国碳排放总量(包含生活消费碳排放)的3.50%;其中,旅游业直接碳排放为55.65 Mt,分别为交通42.25 Mt,游览1.08 Mt,住宿2.5 Mt,餐饮2.76 Mt,商品销售4.12 Mt,娱乐0.59 Mt,邮电通讯0.43 Mt,其他服务1.92 Mt;旅游业间接碳排放为80.24 Mt,主要贡献国民经济部门为炼焦、煤气及石油加工业、交通运输及仓储业、机器设备制造业、食品制造及烟草加工业等,约占总贡献率的60%。     

钢铁企业焦化工序节能减排途径探讨

从焦化技术改进、资源综合利用、余热回收利用三方面探讨了钢铁企业焦化工序节能减排途径。分析了捣固炼焦、干熄焦等技术,为钢铁企业实施节能减排提供参考。     

干燥器法与穿孔萃取法测定中密度纤维板甲醛释放量的相关性研究

分别采用GB 18580标准中的干燥器法和穿孔萃取法检测中密度纤维板的甲醛释放量,并根据两种方法检测出的结果分析其相关性。结果表明,两种检测方法呈显著线性相关。     

Energy and carbon dioxide (CO2) balance of logging residues as alternative energy resources: system analysis based on the method of a life cycle inventory (LCI) analysis

Using the method of a life cycle inventory (LCI) analysis, the energy balance and the carbon dioxide (CO₂) emission of logging residues from Japanese conventional forestry as alternative energy resources were analyzed over the entire life cycle of the residues. The fuel consumption for forestry machines was measured in field experiments for harvesting and transporting logging residues at forestry operating sites in Japan. In addition, a total audit of energy consumption was undertaken. It involved an assessment of materials, construction, and the repair and maintenance of forestry machines as well as the costs associated with an energy-conversion plant. As a result, the ratio of energy output to input was calculated to be 5.69, indicating that the system examined in this study could be feasible as an energy production system. The CO₂ emission per MWh_e (e: electricity) of the biomass-fired power generation plant was calculated to be 61.8kgCO₂/MWh_e, while that of coal-fired power generation plants in Japan is 960kgCO₂/MWh_e. Therefore, the reduction in the amount of CO₂ emission that would result from replacing coal with biomass for power generation by as much as 3.0 million dry-t/year of logging residues in Japan was estimated to be 1.66 million tCO₂/year, corresponding to 0.142% of the national CO₂ emission. This study provides evidence that Japan could reduce its domestic CO₂ emission by using logging residues as alternative energy resources.     

Comparison of New Ultrasonic Digestion Approaches for Plant Matrices in the Analysis of Trace Metals by Inductively Coupled Plasma–Optical Emission Spectroscopy Analysis: Contrast with USEPA Method 3050B

An ultrasonic method using two approaches, A and B, along with a reference Environmental Protection Agency (EPA) Method 3050B [i.e., a mixture of 30 mL of nitric acid–hydrochloric acid–hydrogen peroxide–water (HNO₃-HCl-H₂O₂-H₂O)] were contrasted for leaching of a plant matrix. The trace metals were arsenic, cadmium, cobalt, chromium, copper, mercury, manganese, nickel, lead, selenium, and zinc (As, Cd, Co, Cr, Cu, Hg, Mn, Ni, Pb, Se and Zn) and quantified by ICP-OES followed by an investigation into residue formation and the impact of digestion time. Approach B was the most accurate and precise with percent recoveries ranging between 99 and 120%, whereas ultrasonic approach A and the USEPA method 3050B gave similar results with poor accuracies and precisions. In the optimization of the digestion time using approach B, the total metal recovery was fairly the same over a period of 120 min except for Cr and Cu, which showed slight variations.     

柴油机应用不同配比生物柴油的经济性和排放特性

生物柴油经济性能和排放特性的试验对研究生物柴油的适用性具有重要意义。该文采用柴油机台架试验,测量了4种不同配比的生物柴油混合燃料的经济性和排放特性。试验结果表明：在不作任何调整的情况下,生物柴油及与石化柴油的混合燃料可以直接应用于柴油机,随着生物柴油掺混比例的增加,柴油机的烟度、碳氢化合物HC和一氧化碳CO有较大幅度的下降,改善了柴油机的排放特性。采用生物柴油掺混比例为10%或20%时,可在柴油机经济性能改变较小情况下,改变柴油机的排放状态并减少污染物排放。     

旱区覆膜滴灌棉田N 2 O排放对化肥减量有机替代的响应

覆膜滴灌条件下,采用静态箱-气相色谱法研究了不同施肥策略:CK(不施肥)、CF(N 300 kg/hm~2;P2O590 kg/hm~2;K2O 60 kg/hm~2)、60%CF+OF(普通有机肥6 000 kg/hm~2)、60%CF+BF(生物有机肥6 000 kg/hm~2)对棉田土壤N_2O排放的影响,旨在明确滴灌棉田连续不同施肥策略下土壤N_2O的排放特征。结果表明,棉花生育期N_2O排放通量表现为施肥处理大于不施肥处理,滴灌施肥后第3/4天N_2O排放通量顺序为CF60%CF+OF60%CF+BFCK,而滴灌后第7/8天N_2O排放通量则表现为有机肥处理高于化肥处理,滴灌施肥结束后表现与之相同;生育期的N_2O排放总量以100%化肥处理(CF)最高,与其相比,60%CF+OF和60%CF+BF处理分别降低3.75%和8.37%,N_2O排放系数则分别降低1.39%和73.8%;相关及通径分析均表明,与土壤NH+4-N相比,NO-3-N与N_2O排放的关系更密切。     

关于柴油机喷油泵钢索操纵的设计

随着全球气候异常现象日益增多,对大气污染的排放控制,成为很多国家刻不容缓的工作。我国也推出了关于柴油机排放限值的规定,同时对现有的柴油机提出了更高的要求。主要讨论了在柴油机升级喷油泵后,钢索操纵的设计。