Utility of on- and off-farm weather records for studies in genetics of heat tolerance

Utility of weather information from on-farm and weather stations was evaluated for the application in studies on the genetics of heat stress. Daily milk yield of 31 primiparous Holstein cows was collected at Tifton, GA, from April 28 to July 19, 1993. Weather information was recorded on-farm and was available from weather stations in Georgia. Analyses used daily average of temperature–humidity index (THI). Effects of threshold of heat stress and the rate of decline in milk after the threshold were estimated. With on-farm weather data, threshold was at THI = 22 and rate of decline was − 1.12 kg of milk per unit of THI measured 2 days before milking. At the Tifton weather station, 3 km away from the farm, the threshold was THI = 20 and the rate was the same. With data from Macon, Columbus, Atlanta, and Athens stations, the threshold was at 20, 21, 20, and 20, respectively, and the rate of decline with a 2 day lag was − 0.88, − 1.02, − 0.90, and − 0.97 kg of milk per unit of THI. Subsequent analysis included 2260 test day records from the same farm from 1993 to 2003 and weather data from Tifton station. The highest rate of decline on milk yield of − 0.22 kg per unit of THI occurred at the threshold of 20 and no lag. For data restricted to 1999–2003, the threshold increased to 22 and the rate to − 0.46 kg per THI unit. Public stations provide satisfactory information for national genetic evaluation for heat stress. Critical parts in such an evaluation are modeling of test days and accounting for changes among farms and weather stations over time.     

Effects of three esca-associated fungi on Vitis vinifera L.: II. Characterization of biomolecules in xylem sap and leaves of healthy and diseased vines

Secondary metabolites and host defense compounds were shown to occur in xylem sap, and leaves of Vitis vinifera cv. Italia and cv. Matilde naturally infected by the esca-associated fungi Phaeomoniella chlamydospora (Pch), Togninia minima (Tmi) and Fomitiporia mediterranea (Fme). Samples of xylem sap and leaves were collected from healthy vines and from vines showing severe symptoms of brown wood-streaking caused by Pch and Tmi, or from vines with symptoms of both brown wood-streaking and white rot caused by Fme. Xylem sap collection was carried out during the early spring of 2003 and 2004, corresponding to the phenological phases: (A) cotton bud; (B) green tip; (C) leaves out; (D) stretched out leaves; and (E) visible clusters. In the present work we have studied the accumulation of biomolecules (pentaketides and α-glucans), host defense compounds (benzaldehydes, benzoic acid and cinnamic acid derivatives, flavonols, flavanols, flavan-3-ol derivatives and stilbenes) at different stages of grapevine development. Accumulation and changes in total phenolics and recurring phenolics, and of three phytotoxic secondary metabolites (scytalone, isosclerone and pullulan) were analyzed by HPLC. On comparing results for cv. Italia and cv. Matilde, it can be seen that phenolic concentrations are strongly related to the cv.     

Effects of three esca-associated fungi on Vitis vinifera L.: III. Enzymes produced by the pathogens and their role in fungus-to-plant or in fungus-to-fungus interactions

When the esca-associated fungi Phaeomoniella chlamydospora (Pch), Togninia minima (Tmi) and Fomitiporia mediterranea (Fme) were grown in liquid stationary cultures, it was seen that they were able to live in media containing resveratrol (RES) or tannic acid (TA) as the sole carbon source and that the fungi were able to convert both compounds. Particular attention is paid here to detecting RES and TA conversion. Pch, Tmi and Fme were partially inhibited by RES or TA. Pch, Tmi and Fme produced extracellular tannase, laccase and peroxidase enzymes in liquid or agarized cultures, whether glucose was present or not. When colonies of Pch, Tmi and Fme were confronted, they showed spatially and temporally heterogeneous patterns of laccase and peroxidase activity. The results indicate the non-synergistic, competitive association of Pch and Tmi and the inhibition of Fme growth. Muconic acid, a well-known intermediate in a large number of lignin and phenol oxidative processes, can partly or completely inhibit the lignolytic agent Fme, but is tolerated by Pch and Tmi. An explanation for wood pigmentation patterns by Pch, Tmi and Fme is given.     

Carbon Fluxes from Different Pools in a Mined Area under Reclamation in Minas Gerais State,Brazil

Despite the benefits of grass cultivation and organic fertilization in mining areas undergoing reclamation, these practices may be associated to CO₂ emissions and soil organic matter (SOM) losses by priming effect. In the present study, we evaluated the changes on SOM pools and C–CO₂ emissions in a bauxite‐mined area under reclamation fertilized with poultry litter (PL) (0, 10, 20, and 40 Mg ha⁻¹) and cultivated with Brachiaria brizantha . Increases of about 3·5 times in the soil labile C were observed 1 year after experiment establishment. High C–CO₂ fluxes and a significant positive priming effect were observed in the presence of B. brizantha , increasing native C mineralization by nearly 4·9 times. Nevertheless, no net soil C loss was detected, probably because of the C inputs derived from B. brizantha , which offset these losses. In fact, the grass increased total organic C by 45% when fertilized with 40 Mg PL ha⁻¹. The data obtained suggest that the cultivation of B. brizantha fertilized with PL can be a promising option for rapid recovery in SOM in areas under reclamation. Copyright © 2016 John Wiley & Sons, Ltd.     

Reviews

Neher, Clark D. and Marlay, Ross Values, Culture, Development and Democracy in Southeast Asia: The Winds of Change Ravenhill, John (ed.) The Political Economy of East Asia: Vol. 1 Japan Vol 2: China, Korea and Taiwan Vol 3: Singapore, Indonesia, Malaysia, The Philippines and Thailand Lim, David Explaining economic growth: a new analytical framework Naya, S.F. and Tan, J.L.H. (eds) Asian Transitional Economies: Challenges and Prospects for Reform and Transformation Tilton, Mark Restrained trade: cartels in Japan's basic materials industries Province, Guizhou The population atlas of Guizhou Province Smith, Michael French Hard times on Kariru island: poverty, development and morality in a Papua New Guinea Village Dalziel, Paul and Lattimore, Ralph The New Zealand macroeconomy: a briefing on the reforms     

Resin canal traits relevant for constitutive resistance of Norway spruce against bark beetles: environmental and genetic variability

The influence of genetic determination and environment on the variability of secondary resin canal traits was investigated on 15–19-year-old Norway spruce (Picea abies (L.) Karst.) clones grown in Lower Austria (Pressbaum and Ulmerfeld) and southern Sweden (Knutstorp and Hermanstorp). Eleven and 20 clones were present on the two Austrian and the two Swedish sites, respectively. The sites differed in their water availability, as indicated by different annual precipitation and soil type. Resin canal traits measured were the number of epithelial cells per canal, the number of resin canals per unit tangential wood surface area, the mean resin canal area and the total resin canal area per unit tangential wood surface area. The latter three traits are known to be related to the constitutive resin flow of Norway spruce.

Environment had an influence on the variability of resin canal traits but the most important factor for the variability was the tree’s genetic disposition. Within countries, clones from the drier sites (Pressbaum and Hermanstorp) showed significantly smaller resin canals. Trees from Pressbaum also had smaller total resin canal areas than trees from Ulmerfeld. The number of epithelial cells and the number of canals did not differ between sites.

Resin canal traits had wide genetic variation and high broad sense heritabilities (H²), with values between 0.28 and 0.82. Highest heritability values were reached for the number of epithelial cells and the number of canals (H² > 0.8). Genotypic correlations across trials were high for the resin canal traits and approached 1 in both the Austrian and the Swedish trials, indicating that there was little genotype by environment interaction for these traits and thus the ranking of clones was very similar in the different environments.

The number of epithelial cells, the mean area and the total resin canal area showed either moderately significant positive genotypic correlations with tree growth traits or none at all.

In a breeding context, our results are encouraging and indicate that high constitutive defence potential against bark beetles, such as Ips typographus, is not aligned with low volume growth. But it should be taken into consideration that environment and forestry practices can also have an impact on the resin reservoir provided by the radial resin canals.     

Lignin fragments rich in detached side-chain structures found in water-soluble LCC

The content of the glyceraldehyde-2-aryl ether-type structure in water-soluble lignin–carbohydrate complex (LCC) fractions, which were obtained from Japanese cedar and birch residual wood meal after milled wood lignin isolation, was determined by ozonation. Quite high amounts of the glyceraldehyde-2-aryl ether-type structure were found in water-soluble LCC fractions of both species; about 3–5 times higher than those of other fractions. This result, as well as the high content of the β-1 structure in these fractions shown in our previous reports, suggest that lignin in these fractions has the characteristics of endwise-type lignin, because the glyceraldehyde-2-aryl ether-type structure and β-1 structure are typical characteristics of this type of lignin fraction. These results are in good agreement with the generally accepted hypothesis that the glyceraldehyde-2-aryl ether-type structure and β-1 structure are generated at the same time by a radical coupling reaction. The results also indicated that these two structures are present in close proximity in the lignin.     

Veneer strand flanged I-beam with MDF or particleboard as web material II: effect of resin type,application rate,strand dimension,and pressing time on the basic properties

Optimization of the manufacturing conditions of the veneer strand flanged I-beam invented in the previous study was investigated using different combinations of strand dimensions, resin types between web and flange, different pressing times, and different wood–resin moisture contents under conventional hot pressing conditions. The main results revealed that the strand dimensions have no effect on the bending properties of the flange part and the dimensional stability of the I-beam. Increasing the resin application rate between strands was found to improve the dimensional stability of the I-beams. The use of isocyanate (MDI) resin between web and flange significantly improved the bond strength between web and flange, the modulus of rupture of the I-beam, and the modulus of rupture of the flange part. Dimensional stability was also improved. Shortening the pressing time from 20 to 12min was found to be feasible. Using low wood-resin moisture content was found to interfere with the curing of the phenol–formaldehyde (PF) resin at the flange part resulting in poor quality beams. Of the three moisture content levels tested, 12% was found to be the optimal level for producing I-beams with balanced mechanical properties and dimensional stability.Part of this work was presented at the 53rd Annual Meeting of the Japan Wood Research Society, Fukuoka, March 2003     

Hydration behavior and compressive strength of cement mixed with exploded wood fiber strand obtained by the water-vapor explosion process

Poor compatibility was found between exploded wood fiber strand (WFS) and cement due to the excessive presence of water-soluble degraded polysaccharides in extractives of exploded WFS obtained from weathered wood waste treated by the water-vapor explosion process (WVEP). This study presents some comparative results from a continuing investigation on the compressive strengths of exploded WFS–cement mixtures. Based on results previously obtained with the hydration test, the relation between hydration behavior and compressive strength of the mixture was explored. In addition, the effect of the curing age on compressive strength development of the mixture with selected additive chemicals was examined. The results supported the results of early studies with hydration tests indicating that adding MgCl₂ to the mixtures of exploded WFS mixed with quick-curing cement or ordinary Portland cement and a composite of MgCl₂ + CaO added to the mixture of exploded WFS and furnace-slag cement effectively improved the hydration behaviors; it greatly enhanced the compressive strengths of mixtures as well. Compressive strengths were strongly correlated to maximum hydration temperatures (T_max) of wood–cement mixtures influenced by the cement type, wood wastes (treated or not with WVEP), additive chemicals, and their content levels. The results also indicated that adding selected chemicals had no significant effect on compressive strength among the mixtures of exploded WFS mixed, respectively, with three types of cement at a curing age of 180 days. X-ray diffraction, scanning electron microscopy, and energy dispersive X-ray spectroscopy were used to identify the hydration products and to probe the element distribution of the mixture in the wood–cement interface zone from a fractured surface.Part of this report was presented at the 52nd Annual Meeting of the Japan Wood Research Society, Gifu, April 2002     

The interaction between maternal and post‐hatch n‐3 fatty acid supplementation in broiler diets

This study investigated whether offspring from n‐3‐supplemented breeders have an enhanced performance and immune organ weight when fed a post‐hatch n‐3‐enriched diet in comparison with their control‐fed counterparts and the importance of timing of omega‐3 supplementation. Therefore, 480 Ross‐308 broiler breeder hens were fed one of four different diets (120/treatment). The control diet (CON) was a basal diet, rich in n‐6 fatty acids (FA). The three other diets were enriched in n‐3 FA, formulated to obtain a different EPA/DHA ratio of 1/1 (EPA = DHA), 1/2 (DHA) or 2/1 (EPA). At 33 weeks of age, eggs were incubated to obtain 1440 offspring. They were set up according to their maternal diet and sex in 48 pens of 30 chicks each (12 pens per maternal treatment: six male and six female). Half of the offspring were given a post‐hatch control diet, whereas to other half received an n‐3‐supplemented diet. Zootechnical performance was followed for starter, grower and finisher phase, and at the end of each phase two, chicks per pen were sacrificed to determine the weight of the immune organs. No interaction was found between maternal and post‐hatch n‐3 treatment for zootechnical performance. An interaction arose between the maternal and post‐hatch n‐3 supplementation for proportional bursa weight at day 1 and day 14 and proportional liver weight at day 14, but effects on immune organ weight were rather limited. Offspring post‐hatch n‐3 supplementation did not enhance maternal n‐3 supplementation.