广东省海洋捕捞产量灰色预测

为摸清今后海洋捕捞业的发展动态,以广东省海洋与渔业局提供的1996～2003年广东省海洋捕捞业统计数据为基础,分别建立灰色预测模型,通过模型对广东省海洋捕捞业发展趋势做出了近5年预测。预测结果,2010年海洋捕捞产量在167×104t,南海的捕捞产量为156.78×104t,远洋渔业产量为19.82×104t。通过对预测结果的可信度进行分析,进一步确定这种分析结果的合理性,从而为确定今后广东省海洋捕捞业发展方向,渔业生产部门制订投资决策和合理安排生产提供科学依据。     

Visual FoxPro中错误处理技术

论述了Visual FoxPro程序设计过程中经常出现的错误,分析问题产生的原因并给出相应的解决办法.     

不同水分胁迫下的小麦/玉米间作群体响应机理研究

为探明不同水分胁迫下小麦/玉米间作群体响应机理,试验设置了1个充分灌水、3个不同水分胁迫程度间作处理及2个充分灌水单作对照处理。结果表明:共生期内,各间作处理间普遍存在小麦条带水分捕获当量比高于玉米条带的现象,随水分胁迫的加剧,此趋势愈加明显;随着生育期的推进,此趋势渐弱甚至出现反转,而带间的水分相对竞争能力则呈现逐渐下降的规律。在根系分布特征方面,充分灌溉下间作群体平均根系分布深度为17. 15～17. 24 cm,其根质量密度的90. 42%～90. 77%分布于耕层内,其中小麦为87. 49%～88. 70%,玉米为92. 63%～92. 81%,而水分胁迫会显著影响间作群体根系的空间分布。在间作优势方面,要保持间作优势,每次灌水最少需满足80%左右的田间持水率,随水分胁迫程度的增加,间作群体土地当量比呈现先微升、后下降的规律,且间作玉米的偏土地当量比下降速率快于间作小麦。在种间相对竞争能力方面,表现出随水分胁迫的加剧,小麦相对于玉米先微升、后快速下降,并逐渐近于消失的趋势。间作群体的特殊性造成了两作物条带存在时间与空间上的土壤水分差异,进而导致灌溉水入渗速度及入渗总量的不同,而水分胁迫增大了这种趋势,这在一定程度上满足了灌溉水的最佳去处,从而提高了间作群体的水分利用效率,进而揭示了间作群体的节水增产机理。     

基于立体视觉的农机热锻件测量系统设计

为解决农机热态锻件的在线尺寸测量问题,提出了一种基于计算机双目立体视觉的解决方案。针对热锻件的图像获取、特征提取、图像匹配和三维重建等问题展开研究,分别采用光谱选择性图像采集方案、形态学角点和轮廓提取方案,基于标定立体校正的快速匹配和重建方案,构建了一套在线测量系统。为提高系统的实时性,采用Open CV计算机视觉库函数实现相应算法。以一个被加热至1 000℃圆柱体锻件为试验对象,测量结果直径相对误差为2.20%,高度相对误差为1.81%,用时87s。试验结果表明:所提出的农机高温热锻件几何参数测量方法能够满足锻造生产现场对尺寸测量实时、精确、高效的要求。     

钢板仓储粮害虫陷阱诱捕技术研究

采用ＧＪ８９型良虫陷阱检测器对钢板仓害虫物种分布组成及主要害虫书虱和螨类在不同储藏期各部位的分布进行了调查研究。结果表明：３～４月仓库昆虫物种组成简单,为书虱和长角谷盗两种,分别占捕获总虫量的９９．５％及０．５％;８月份仓库昆虫７种,主要种类是书虱和螨类,分别占捕儿总量的６１．９％和３８％,次要害虫种类有赤拟谷盗、长角谷盗、玉米象、谷蠹及花斑皮蠹。不同储藏期、不同粮层、不同方向害虫分布存在差异。调     

微囊型甲醛捕捉剂对薄木饰面人造板甲醛释放量的影响

随着薄木饰面板在家具、装修领域中的使用量越来越大,人造板的游离甲醛释放问题也愈发引起人们关注,现有的甲醛捕捉剂一般只能在短期内发挥效果,而对人造板甲醛的长期释放控制效果并不理想。为解决人造板甲醛释放的长期性问题,以尿素为芯材、乙基纤维素为壁材制备微囊型甲醛捕捉剂,探讨不同乳化剂及芯壁比制备的微囊型甲醛捕捉剂对饰面人造板甲醛控释效果的影响。结果表明,当乳化剂为十二烷基硫酸钠、芯壁比为3∶1,乳化剂用量1%、壁材质量分数3%、搅拌速度1000 r/min时,制备出的微胶囊芯材负载效果最好,负载量达到36.24%、负载效率为8.05%。采用该微胶囊以2%的质量比与脲醛树脂胶黏剂混配进行饰面板贴面热压时,得到的薄木贴面板的甲醛释放量相比未处理饰面板降低了37.9%。经过20 d后,微胶囊对其饰面板甲醛的释放仍表现出一定的控制效果,饰面板的甲醛释放量为0.99 mg/L,仅为未处理饰面板的56.9%。说明用微囊型甲醛捕捉剂对饰面人造板进行处理不仅能够对饰面板中的甲醛进行控释,而且在长期的放置、使用过程中也能够持续发挥作用,从而达到降低室内空气中甲醛浓度的目的。     

TC/IC-RT-PCR检测黄瓜绿斑驳花叶病毒

根据GenBank上登录的黄瓜绿斑驳花叶病毒(CGMMV)外壳蛋白基因保守序列,设计特异性引物,利用试管捕捉RT-PCR(TC-RT-PCR)和免疫捕捉RT-PCR(IC-RT-PCR)技术对黄瓜绿斑驳花叶病毒进行检测.结果表明,TC-RT-PCR和IC-RT-PCR均具有良好的特异性,检测灵敏度分别比DAS-ELISA高10和100倍;通过对一批进境黄瓜样品的检测,验证了2种检测技术的实际应用效果.因此,本研究建立的TC-RT-PCR和IC-RT-PCR检测技术,可有效应用于CGMMV的快速检测.     

二氧化碳输送管道关键技术研究现状

碳捕集与封存作为减少温室气体排放的重要手段成为全球研究热点，管道运输是该技术得以实施的关键环节。当CO2处于超临界或密相状态时，其具有液体的密度、气体的粘性和压缩性，对于管道运输是最有效率的。由于管输CO2的特殊性质，CO2输送管道与碳氢化合物输送管道存在不同；由于海洋环境的复杂性，CO2海上输送管道与陆地输送管道存在不同。系统总结了实现CO2管道输送需要解决的关键技术问题，着重介绍了CO2输送管道流动保障和延性断裂扩展领域的研究进展，指出CCS作为大规模减少温室气体排放的重要选项，开展与之相关的基础研究十分迫切。（图3，参44）     

The utility of a novel formulation of alfaxalone in a remote delivery system

ObjectiveTo quantify induction time, reliability, physiological effects, recovery quality and dart volume of a novel formulation of alfaxalone (40 mg mL^?1) used in combination with medetomidine and azaperone for the capture and handling of wild bighorn sheep.Study designProspective clinical study.AnimalsA total of 23 wild bighorn sheep (Ovis canadensis) in Sheep River Provincial Park, AB, Canada.MethodsFree-ranging bighorn sheep were immobilized using medetomidine, azaperone and alfaxalone delivered with a remote delivery system. Arterial blood was collected for measurement of blood gases, physiologic variables (temperature, heart and respiratory rates) were recorded and induction and recovery length and quality were scored.ResultsData from 20 animals were included. Administered dose rates were alfaxalone (0.99 ± 0.20 mg kg^?1; 40 mg mL^?1), azaperone (0.2 ± 0.04 mg kg^?1; 10 mg mL^?1) and medetomidine (0.16 ± 0.03 mg kg^?1; 30 mg mL^?1). The mean drug volume injected was 1.51 mL. The median (range) induction time was 7.7 (5.8–9.7) minutes, and recovery was qualitatively smooth.Conclusions and clinical relevanceAn increased concentration formulation of alfaxalone was administered in combination with medetomidine and azaperone, and resulted in appropriate anesthesia for the capture and handling of bighorn sheep. The dart volume was small, with potential for reducing capture-related morbidity.     

Optimization of the stocking parameters for mud spiny lobster Panulirus polyphagus (Herbst, 1793) capture‐based aquaculture in tropical open sea floating net cages

Mud spiny lobsters, Panulirus polyphagus (Herbst, 1793), were reared at four different stocking sizes and stocking densities in open sea cages to evaluate their effects on growth performance. To evaluate the effect of stocking size on the growth performance, the lobsters were segregated into four different treatment groups according to size and were stocked at a density of 300 animals per cage. To evaluate the effect of stocking density on the growth performance, lobsters of 81–100 g were stocked in four different stocking densities, i.e. 16/m², 24/m², 32/m² and 40/m². The results showed that the growth rate of (60–80 g) size group, was significantly higher compared to the size groups, i.e. 101–120 g and 121–140 g comprising of larger individuals. The final body weight, though significantly higher in 81–100 g as compared to 60–80 g, the growth performance (i.e. weight gain percentage (WG %) and specific growth rate (SGR)) were not significantly different. The density‐dependent influence on growth performance was evident in this study. The WG % and SGR during 90 days’ culture period was significantly higher in 24/m² compared to other groups. This study provides crucial information about the appropriate stocking density and stocking size of lobsters at the field level, which would help to promote sustainable lobster cage farming by maximizing the production potential of the system.