Random point sampling to detect gain and loss in tree canopy cover in response to urban densification

Urban tree canopy cover (UTC) is a simple, and common, measure of urban forest resource. Urban infill development is likely to lead to losses in UTC under private tenure, at a time when local governments are setting ambitious targets to increase UTC overall. Simple, statistically rigorous methods are required to benchmark and track change in UTC, whilst identifying which land-use types or tenures experience change.We estimated UTC in six Melbourne suburbs in 2010 and 2015 by randomly sampling 2000 points across public land, public streetscapes and private land. We were able to detect a net change in UTC of <2% over five years to a 95% level of confidence. A significant net decrease in UTC (−2.4%) was only detected in one of the six suburbs. Two suburbs had a net increase in UTC by +2.7% over five years. On private land, there was often areas of UTC loss, but this was generally offset by canopy gain in other areas of the private realm as well as in streetscapes and public land. Losses in UTC on private land were mainly due to tree removal, with or without subsequent construction works.This study describes a simple, but statistically rigorous, method to quantify UTC change and the drivers of change in different land-use types and tenure. Despite studying two suburbs will high rates of infill development, only one suburb showed evidence of net UTC decrease. The ‘dynamic equilibrium’ in UTC, whereby canopy losses area approximately offset by concurrent canopy gain, means that ambitious targets being set by local governments to increase UTC may be difficult to achieve without changes in tree protection and infill development policy and planning.     

The effect of orifice shape and the injection pressure on enhancement of the atomization process for pressure-swirl atomizers

The following paper presents results of studies on the atomization process of water in pressure-swirl atomizers with different shapes of orifice using a laser diffraction technique. The effect of the shape of the orifice and the injection pressure on the droplet size distributions and mean droplet diameters was analyzed. The results obtained showed that droplet size decreases with an increasing injection pressure and droplet size distributions are expanded. The smallest droplet diameters were obtained by atomization in profiled and conical shaped orifice atomizers, however the largest droplet diameters were achieved for plain orifice atomizers. The analysis of the interfacial surface produced by the atomizers has shown that the greater enhancement of the atomization process had occurred using profiled and conical shaped orifice atomizers compared with plain orifice atomizers. The correlation for the Sauter mean diameter as a function of the Reynolds number and the ratio of orifice length to diameter has been proposed. The paper is related to agricultural water management. The data obtained are important from the point of view of the design of atomizers, agricultural treatments and crop protection.     

Quantitative trait loci for fruit size and flowering time-related traits under domestication and diversifying selection in cucumber (Cucumis sativus)

In cucumber, the genetic basis of traits under domestication and/or diversifying selection is not well understood. Here, we reported QTL mapping for flowering time and fruit size-related traits with segregating populations derived from a cultivated × wild cross. Phenotypic data of flowering time (FT), fruit size (FS), fruit number (FN) and fruit weight per plant (FW) were collected in multiple environments. QTL analysis identified 19 QTL for these traits. We found that the major-effect QTL FT1.1 played an important role in regulating flowering time in cultivated cucumber, whereas the minor-effect QTL FT6.3 contributed to photoperiod sensitive flowering time during domestication. Two novel consensus FS QTL, FS1.4 and FS2.3, seem to be the targets of selection during breeding for the US processing cucumber. All other FS QTL were co-localized with previously detected QTL using populations derived from cultivated cucumbers, suggesting that they were under selection during both initial domestication and subsequent improvement. Results from this study also suggested that the wild cucumber is a useful resource for capturing positive transgressive segregation and novel alleles that could be explored in cucumber breeding.     

基于熵算法的股票指数高频数据复杂度测算与评价

在日内高频环境下检验基于兼容法的柯尔莫哥洛夫熵、样本熵和模糊熵等复杂度测算方法对我国沪深300股票指数的测算效率，并运用筛选后的有效算法分阶段研究和比较了序列复杂度的变化过程与变化幅度.结果表明，模糊熵算法是一种更适用于我国沪深300股票指数的有效复杂度测算方法，其对相似容忍度的敏感性更低，测度值连续性更好.随时间推移，我国沪深300股票指数复杂度整体呈上升趋势,而相较于发达市场甚至周边新兴市场其复杂度偏低.     

Effect of the particle size on the ammonia removal rate and the bacterial community composition of bioflocs

The total ammonia nitrogen (TAN) removal efficiency and bacterial community composition of bioflocs with <50-μm particle size, > 50-μm particle size and un-sieved bioflocs were investigated in the current study. The initial ratio of dissolved organic carbon to TAN (DOC/TAN) in the three groups were about 14:1. No significant difference was found in the removal rate of TAN, average concentrations of TAN and nitrite nitrogen among the three groups (P > 0.05). The C/N (w/w) ratio of the > 50-μm bioflocs was significantly higher than those of the other groups. No significant differences were found in the crude protein content in the bioflocs among the three groups. The development of the bacterial community compositions of the bioflocs was analyzed by Illumina MiSeq sequencing analyses. Most OTUs were shared among the three groups at all the sampled time points. With the increase in the relative abundance of phylum Firmicutes, that of phylum Proteobacteria, Chorolexi, and Bacteroidetes decreased in all the three groups. The phylum Firmicutes and genus Bacillus were predominant in all the sampled time points. At the end of the experiment, genus Bacillus accounted for 81% in the < 50-μm group, 82% in the > 50-μm group, and 75% in the un-sieved group.     

水泵机组状态监测与故障诊断系统研究

从20世纪60年代到21世纪，我国的泵站工程为输水、供水以及防洪减灾提供了有力保障。针对水泵机组的状态监测与故障诊断进行研究，建立水泵机组状态监测与诊断的软件及各分析模块与数据库，进行机组性能的预测研究，为水泵机组的状态维修提供支持。     

农机检测实验室样品管理研究

样品管理是实验室工作中的重要环节，规范化、制度化的样品管理工作可保障实验室管理体系的有效运行。阐述实验室样品管理的总体要求与原则，从样品接收、标识、确认、流转、贮存、处理等环节人手，介绍样品全过程跟踪管理方法，为做好实验室样品管理工作提供参考。     

参考群筛选方法及规模对基因型填充准确性的影响

为探究基于A矩阵期望遗传关系最大化（maximizing the expected genetic relationship for matrix A,RELA）、基于A矩阵目标群体遗传方差最小化（minimized the target population genetic variance for matrix A,MCA）、平均亲缘关系最大化（the highest mean kinship coefficients,KIN）、随机选择（random selection,RAN）、共同祖先筛选（common ancestor,CA）等不同参考群筛选方法及参考群规模对基因型填充准确性的影响。本研究使用矮小型黄羽肉鸡作为试验群体,采用鸡600K SNP芯片（Affymetrix Axion HD genotyping array）进行基因分型,测定435羽子代公鸡45、56、70、84、91日龄体重。利用Beagle软件将低密度SNP芯片填充为高密度SNP芯片数据,比较不同参考群筛选方法、参考群规模对基因型填充准确性的影响,以及填充芯片基因组预测准确性。结果表明,使用Beagle 4.0结合系谱信息进行填充效果最佳,其次为Beagle 4.0,而Beagle 5.1填充效果最差。使用MCA方法筛选参考群进行基因型填充准确性最高,使用RAN方法筛选参考群进行基因型填充准确性最低,MCA、RELA、CA 3种方法基因型填充准确性差别较小。相比其他方法,使用MCA方法筛选个体作为参考群将低密度SNP芯片填充至高密度SNP芯片进行基因组选择的预测准确性较高,与真实高密度SNP芯片的基因组预测准确性相差甚微。随着参考群规模增大,基因型填充准确性也随之增加,但增速逐渐下降,最后趋于平缓。综上所述,可以通过参考群筛选方法构建参考群以及控制参考群规模,以保证基因型填充和基因组预测准确性并节省成本,本研究为基因型填充在畜禽遗传育种中的应用提供技术参考。     

口感化及颗粒化开食料对早期断奶羔羊生长和胃肠道发育的影响

分析探讨口感化及颗粒化开食料对早期断奶羔羊生长和胃肠道发育的影响。选取新生健康的双羔湖羊公羔42只,随机分为两组,分别饲喂颗粒化和口感化开食料,试验期42 d。两组羔羊21日龄之前的采食量、体重和绝对生长的变化趋势相似。21日龄以后,口感化开食料组羔羊的采食量、体重、绝对生长和相对生长均明显高于颗粒化开食料组,42日龄体重、后两周的采食量及15～21日龄的相对生长率在两组间有显著差异(P < 0.05)。口感化开食料还显著提高(P < 0.05)了羔羊42日龄时的育肥指数、体长指数、胸围指数、管围指数和断奶前的瘤胃质量和瘤胃/胴体。以上结果表明,与颗粒化开食料相比,口感化开食料更有利于羔羊早期断奶前后的瘤胃发育、采食量提高、体重和体尺的发育,但对其他胃室及肠道发育没有影响。     

我国和欧盟兽药质量监督抽检工作机制对比研究

为更好地完善我国兽药质量监督抽检计划,通过对欧盟药品抽检管理工作机制的研究,本文分析了欧盟和我国兽药监督抽检管理方式的不同,从抽检责任部门、抽检目的、抽检计划内容、抽检计划制定流程、抽检品种的遴选和检测参数的确定等6方面进行了对比分析,探讨我国兽药质量监督抽检工作的管理中可以借鉴的方面。