地表多水门管道畦灌试验研究

多水门管道灌溉是采用多水口管道替代水沟的一种地表灌溉方式。１９９３至１９９５年试验结果表明，多水门管道灌溉和传统水沟灌溉相比，具有节水、节能、改善灌水分布均匀度，提高灌溉质量，缩短灌溉时间和扩大作物种植面积等优点     

Design method and homogeneity control of bridge fair-faced concrete

According to the structural characteristics of bridge engineering, the mix optimization design method of bridge fair-faced concrete was presented, and C30~C50 concrete with high cohesion and package, outstanding fluidity and excellent mechanical properties were prepared. Through the test of air content of fresh concrete, micro hardness and micro structure in different parts of hardened concrete specimens, effects of viscosity-modifying admixtures on homogeneity of concrete were discussed. The results showed that the composition of bridge fair-faced concrete were relatively homogeneous, and the microstructure were relatively dense. When C30 concrete mixed with 5 × 10 -5 cellulose ether or 6% silica fume (mass fraction of cementitious material), air content of fresh concrete were less than 2%, and slurry viscosity values were between 1 900 and 2 000 MPa·s. Also, the micro hardness values in different parts of hardened concrete specimens were closed. The results were applied in practical bridge engineering, which generally meets the apparent quality requirements of bridge fair faced concrete.     

Experiment for Condensing Heat Transfer Performance in a New Type of Horizontal Three Dimensional Inner Microfin Tubes

A new type of three dimenstional inner microfin tube is devoloped. Under four different pressures and in the range of condensing mass velocities from 33 to 153 kg/m2 . s,and by the experimental study of the three kinds of tubes with different microfin parameters, the performances of the condensation heat transfer for R11 in the horizontal microfin tubes and obtained. The experiments show that the inner microfin tube is a hopeful and nighty effective condensing heat transfer enhancement tube.     

Dropwise Condensation Heat Transfer Coefficient on the Horizontal Circular Surface with Radial Gradient Surface Energy

A theoretical model is developed for the dropwise condensation heat transfer on the horizontal circular surface with radial gradient surface energy based on the heat transfer model of individual condensate drop and the size distribution model of condensate drop on homogeneous condensation surface.The effect of variation of contact angle on the gradient surface on condensation heat transfer and condensate drop size distribution is taken account of in this model.The theoretical calculation method was obtained to predict the dropwise condensation heat transfer coefficient on the horizontal circular surface with radial gradient surface energy under various wall subcooled temperature,contact angle profile on wall surface,and working fluid.The effects of surface energy gradient,wall subcooled temperature,and thermophysical properties of condensate on the condensation heat transfer are discussed respectively.The calculation results show that the condensation heat transfer coefficient increases slightly with the increase of wall subcooled temperature.As latent heat and surface tension increasing,the condensation heat transfer coefficient increases.A larger surface energy gradient induces a larger condensation heat transfer coefficient.     

Analysis of Heat Transfer and Optimal Parameters of Multi-louvered Fin Condenser

The authors conduct the experimental study and optimal computing for the condenser of automobile air conditioner. The especially the properties of heat transfer and flow at the side of air when using shutter fin. The authors the influence of several combinations of fin's geometry parameter to heat transfer and flow resistance. The maximal heat transfer is used as a criterion relation to select the fin's geometry parameters in the same facing air area of condenser. Furthermore, a program is designed to conduct optimal computing, and the computing results are basically consistent with experimental results. It shows that the optimal method is reasonable and the results can be applied to engineering practice.     

RECREATING SMALL SEAMLESS TUBE MILLS BY PIERCING INSFEAD OF ROLLING

This paper discuss the effects of automatic plug mills in small seamless tube mills. Far from traditional ideas,the auther comes rp with mew ideas, which adot the mew process of replacing rolling by piercing,a huge sum of economical interests and great social benefits will be gained.     

Performance Simulation of EHE for 300MW CFB

With the development of circulating fluidized bed boiler(CFB),the study field of external heat exchanger(EHE) is greater in extent and degree.In order to research the working process of EHE,the model which deals with flow and heat transfer of EHE for 300MW CFB of Dong Fang Boiler Grou PCo.Ltd.is presented.Based on the cell modeling theory,the EHE is divided into several chamber by heating surfaces.The mass and energy conservation equations of each cell have been developed according to some reasonable assumption.The complete mathematical model has been compiled by Fortran and solved by classical Algorithm of Runge-Kutta.The static test and perturbation experiment of simulating model has been performed.The simulation results show that the model has been reached the steady state rapidly,the dynamic responses are reasonable and the modeling presented in the paper is reliable and appropriate.     

Computation of Three-Dimensional Temperature Distribution and Thermal Analysis to Integrated Circuit Substrates

The exact three di me nsional temperatu re distribution and thermal analysiS to inte-grated circuit substrates have been presen ted by means of numerical method of a fin ite difference.Thismethed.which will overcome the di fficuItv of mathematical deduction mav be consltieredas an analytical way aided by com puters for thermal design of electron ic compon ents.