The effect of petrocalcic horizons on the content and distribution of organic carbon in a Mediterranean semiarid landscape

Petrocalcic horizons are frequent in soils of semiarid landscapes. A survey of SIC and SOC contents made in Southern Spain in a pilot area with well defined geomorphological surfaces showed that topsoils overlying petrocalcic horizons are almost twice as rich in SOC as soil of similar depth without petrocalcic horizons. This could be due to impedance to root penetration, changes in redox potential and soil water availability caused by the presence of indurated crust. Soil age, on the contrary, seems not be an essential factor, since only a short time is required to reach a steady state in SOC in comparison to the time span available for soil formation on the different geomorphic surfaces.     

氮磷肥施用对保水剂钝化土壤重金属铅镉效果的影响

[目的]探讨氮磷肥施用对保水剂钝化土壤重金属铅镉效果的影响,为揭示土壤水肥保持和重金属污染治理的协调性机制,制定SAP应用技术规程等提供参考。[方法]采用土柱淋溶试验方法,比较添加氮肥和磷肥对SAP钝化土壤铅(Pb)、镉(Cd)效果的影响。[结果]在Pb,Cd复合污染土壤中SAP用量为1.0g/kg时,控氮释磷效果较好,相比无SAP的对照处理,Pb累积淋失量减少5.1%,Cd累积淋失量增加13.6%;氮磷肥添加试验表明,添加氮肥的SAP处理Pb累积淋失量增加76.7%,Cd累积淋失量增加47.6%,添加磷肥的SAP处理Pb累积淋失量减少26.0%,Cd累积淋失量减少20.5%;添加复合氮、磷肥的SAP处理Pb累积淋失量减少2.3%,Cd累积淋失量增加8.3%。[结论]保水剂具有控氮释磷效应,且对土壤中的Pb,Cd有一定钝化作用;氮肥降低SAP钝化Pb,Cd的效果,而磷肥增强SAP钝化Pb,Cd的效果;氮、磷肥复合对SAP钝化Pb的效果影响不显著,但会降低SAP钝化Cd的效果。     

有机无机氮肥配施对莴苣土壤N2O排放的影响

采用静态箱–气相色谱法研究不同种类有机无机氮肥配合施用对盆栽莴苣土壤N_2O排放规律及排放量的影响。试验设置不施肥(CK)、不施氮肥(PK)、施纯化肥(NPK)、有机无机肥配施1(20%猪粪氮+80%化肥氮,NPKM1)、有机无机肥配施2(20%沼渣沼液氮+80%化肥氮,NPKM2)和有机无机肥配施3(20%猪粪堆肥氮+80%化肥氮,NPKM3)共6个处理。结果表明:莴苣生育期各处理施肥后土壤N_2O排放出现多个峰值,出峰时间和大小不一;累积排放量随着生育期的进程逐渐增加,处理间差异更为明显。莴苣生育期各处理土壤N_2O平均排放通量及累积排放量范围分别为0.10～0.25 mg/(m2·h)和1.37～3.42 kg/hm2,大小均表现为NPKNPKM2PKNPKM1NPKM3CK。土壤N_2O排放系数范围为0.13%～0.68%,大小表现为NPKNPKM2NPKM1NPKM3。与NPK处理相比,NPKM1、NPKM2和NPKM3处理莴苣土壤N_2O累积排放量均分别降低48.08%、25.75%和48.30%,产量分别增加48.66%、22.13%和53.76%。总之,施用纯化肥会促进菜地土壤N_2O的排放,而不同种类有机无机氮肥配施能有效减少N_2O排放且提高作物产量,以猪粪类配施效果最佳。因此,有机无机配施是菜地N_2O减排、降低蔬菜种植中氮素损失的重要途径。     

溶磷真菌的筛选及配施难溶态磷对土壤磷素有效性的影响

为研究溶磷真菌菌群对土壤磷素有效性的影响,首先在室内对3株不同种类溶磷真菌(1株属于被孢霉属Z1,1株为青霉属Z2,1株为黑曲霉Z3)的组合效应进行了研究,确定了最佳的菌株组合Z1+Z2+Z3,试验选用Z1、Z2、Z3组成菌群作为试验菌株;然后通过盆栽油菜试验研究溶磷真菌配施难溶态磷(磷酸三钙和磷矿粉)对土壤磷素有效性的影响。结果表明:溶磷真菌处理土壤有效磷、有机质、碱性磷酸酶、蔗糖酶含量和油菜产量分别比基质处理显著增加了60.00%,20.21%,56.45%,53.81%,14.38%,溶磷真菌配施难溶态磷上述各指标都高于单施溶磷真菌处理;单施溶磷真菌对土壤最大吸磷量的影响与基质无差异,溶磷真菌配施难溶态磷可以显著降低土壤最大吸磷量,溶磷真菌+磷酸三钙和溶磷真菌+磷矿粉处理土壤最大吸磷量比溶磷真菌处理显著减少158.7,47.6 mg/kg,溶磷真菌各处理土壤吸附常数都低于对应的基质处理,溶磷真菌可以降低土壤对磷的吸附。在土壤上溶磷真菌应与难溶态磷配合施用,对提高土壤磷素有效性有积极的作用。     

单环刺螠生物扰动对沉积物-水界面氮磷扩散通量的影响

为了解单环刺螠生物扰动作用对沉积物-水界面氮磷扩散通量的影响及其持续性,于2020年11—12月,采用室内实验生态学的方法,设置低密度 (LD,500 尾/m²)、中密度 (MD,2 500 尾/m²)、高密度 (HD,8 300 尾/m²)处理组和1个对照组 (CO,0 尾/m²),进行了2 d为一个实验时段,为期20 d的模拟实验。结果显示,处理组溶解无机氮(DIN)扩散通量变化范围为10.6~765.3 μmol/(m²·d),与对照组相比,低、中、高处理组的DIN通量分别提高了57%、76%、88%。NH₄⁺是DIN的主要贡献者,对DIN的贡献在低、中、高处理组中分别占55%、65%和80%。与对照组相比,低、中、高密度组的平均NH₄⁺通量分别提高了39%、111%和257%,与低、中密度处理组平均NH₄⁺通量相比,高密度处理组分别提高了43.7%和23.6%。在第2~10天,NH₄⁺通量处于持续增加的趋势。处理组PO₄³⁻通量变化范围为−7.85~6.42 μmol/(m²·d),第2~6天,处理组PO₄³⁻通量持续增加。研究表明,单环刺螠的生物扰动能够持续地促进DIN由沉积物向水体中扩散,且存在明显的密度效应。研究结果将为深入认识单环刺螠在水层-底栖系统耦合过程中的生态作用提供基础数据。     

磷矿废弃土地复垦规划探讨

【研究目的】通过对磷矿山废弃土地状况及其磷矿开采对区域生态环境的影响进行调查,探讨废弃磷矿山土地复垦规划及复垦后土地功能分区及用途。【结果】磷矿露天开采对区域生态环境破坏程度极大,严重影响区域生态环境质量,成为环境灾害发生的高风险区,必须明确划分土地复垦目的与用途,对废弃土地有计划、分阶段进行复垦。【结论】磷矿废弃土地主要成因是矿山开采过程中对地表形态的破坏及弃石排土占地。通过对废弃土地的复垦规划有效协调复垦工程中的生态合理性和经济可行性;因地制宜确定废弃土地复垦后功能分区及用途管制,实现生态、经济、社会效益的统一。     

氮素用量对春玉米穗位叶蔗糖合成关键酶活性的影响

试验以高淀粉玉米四单19、普通玉米东农250、优质蛋白玉米丰禾10为材料,研究氮素用量对春玉米穗位叶蔗糖代谢的影响,揭示蔗糖合成过程中蔗糖合成酶(SS)和蔗糖磷酸合成酶(SPS)的调节作用。结果表明：氮素用量适当有利于提高玉米穗位叶蔗糖含量、蔗糖合成酶活性和蔗糖磷酸合成酶活性,证实了蔗糖合成酶和蔗糖磷酸合成酶能促进春玉米叶片蔗糖积累。     

Investigating the effect of various blend ratios of prepared masterbatch containing Ag/TiO2 nanocomposite on the properties of bioactive continuous filament yarns

In this research, possibility of producing and processing antibacterial organic/inorganic nanocomposite polypropylene filament yarns for permanent antimicrobial efficiency has been investigated. First PP powder and inorganic nanocomposite filler were mixed in a twin screw extruder and modified masterbatch was produced. Continuous filament yarn was made by a pilot plant melt spinning machine from the blend of PP granule and various blending contents of the prepared masterbatch. Pure PP and all other combined samples showed acceptable spinnability at the spinning temperature of 240 °C and take-up speed of 2000 m/min. After producing as-spun filament yarns, samples were drawn, textured and finally weft knitted. Physical and structural properties of as-spun and drawn yarns with constant and variable draw ratios were investigated and also tensile and crimp properties of textured yarns were evaluated. Moreover, the DSC, SEM, FTIR techniques have been used for characterization of samples. Finally antibacterial efficiency of knitted samples was evaluated. The experimental results indicated that the maximum crystallinity reduction of modified drawn yarns has reached to 5 %. The observed improvement in the tensile properties of modified as-spun yarns compared to the pure PP was significant. Drawing process improved generally the tensile properties of as-spun yarns. Tensile properties of modified textured and drawn yarns were higher than the pure PP. An optimum of antibacterial activity has been observed in the sample containing 0.75 wt% of nano-filler. It is interesting that the optimum of tensile properties has been also obtained for the sample with maximum bioactivity.     

Synthesis and flame-retardancy of UV-curable methacryloyloxy ethyl phosphates

Tris[2-methacryloyloxy ethyl] phosphate (TMEP), bis(2-methacryloyloxy) ethyl phosphate (DMEP), and 2-(methacryloyloxy ethyl) phosphate (MMEP) were synthesized from phosphorous oxychloride and 2-hydroxyethyl methacrylate, which can be used as flame retardant monomers for UV-curable coating systems. The characterization of the synthesized monomers was carried out by ¹H-NMR, FT-IR, thermo-gravimetric analysis, and the limited oxygen index (LOI) test. The thermal behavior of the cured films depended on phosphorous content and the methacrylate groups in the monomer. The UVcured films from TMEP, DMEP, and MMEP monomers showed LOIS of 28.5, 30.3, and 35.1 respectively. Also, LOI up to 25.4 was obtained for the UV-coated cotton fabrics, which presumably occur through a condensed phase mechanism as verified in the increased residue number. The higher performance of UV-coated cotton fabrics compared to PET was attributed to the facile dehydration and crosslinking of the cellulosic materials.