Sporulation of Pyrenopeziza brassicae (light leaf spot) on oilseed rape (Brassica napus) leaves inoculated with ascospores or conidia at different temperatures and wetness durations

In controlled environment experiments, sporulation of Pyrenopeziza brassicae was observed on leaves of oilseed rape inoculated with ascospores or conidia at temperatures from 8 to 20°C at all leaf wetness durations from 6 to 72 h, except after 6 h leaf wetness duration at 8°C. The shortest times from inoculation to first observed sporulation ( l ₀), for both ascospore and conidial inoculum, were 11–12 days at 16°C after 48 h wetness duration. For both ascospore and conidial inoculum (48 h wetness duration), the number of conidia produced per cm² leaf area with sporulation was seven to eight times less at 20°C than at 8, 12 or 16°C. Values of Gompertz parameters c (maximum percentage leaf area with sporulation), r (maximum rate of increase in percentage leaf area with sporulation) and l ₃₇ (days from inoculation to 37% of maximum sporulation), estimated by fitting the equation to the observed data, were linearly related to values predicted by inserting temperature and wetness duration treatment values into existing equations. The observed data were fitted better by logistic equations than by Gompertz equations (which overestimated at low temperatures). For both ascospore and conidial inoculum, the latent period derived from the logistic equation (days from inoculation to 50% of maximum sporulation, l ₅₀) of P. brassicae was generally shortest at 16°C, and increased as temperature increased to 20°C or decreased to 8°C. Minimum numbers of spores needed to produce sporulation on leaves were ≈25 ascospores per leaf and ≈700 conidia per leaf, at 16°C after 48 h leaf wetness duration.     

不同温度下圆叶决明降解过程红壤可溶性氮及氮水解酶动态变化研究

为了探明圆叶决明（Chamaecrista rotundifolia）降解过程果园红壤供氮水平的变化规律，本研究采用模拟培养试验，研究15℃和25℃培养果园红壤硝态氮、铵态氮、可溶性总氮、可溶性有机氮含量的变化及脲酶、蛋白酶、天冬酰胺酶活性的变化。结果表明，圆叶决明降解过程果园红壤4种可溶性氮含量均显著提高，且在培养140 d达到最大值，25℃培养的效果更佳。其中，可溶性总氮、可溶性有机氮和硝态氮含量随时间的动态变化可用三次曲线方程来拟合。圆叶决明降解过程还能显著提高脲酶、蛋白酶和天冬酰胺酶的活性，其中蛋白酶活性和脲酶活性的变化可用指数方程和三次曲线方程来拟合。本研究认为圆叶决明降解过程可提高果园红壤可溶性氮含量，因此可通过翻压圆叶决明提高土壤的供氮水平。     

液液系统中荷电射流不稳定性

针对生物柴油液液静电雾化乳化过程,建立了色散方程并应用Matlab进行数值计算,分析了水射流速度、荷电电压、水与生物柴油各自的黏度、表面张力对生物柴油中水射流不稳定性的影响.研究结果表明,在水-生物柴油系统中,提高水射流的速度或荷电电压,均能使界面波最大增长率增大,对应的最优波数也随之增加.水的黏度阻碍水射流的破碎雾化,而生物柴油黏度对水射流的破碎雾化却起着促进作用.水-生物柴油的界面张力越小,对液液静电雾化乳化过程越有利.在水-生物柴油液液静电雾化乳化实际应用过程中,除提高水射流速度和荷电电压外,提高水的温度同时尽可能地降低生物柴油的温度,可以形成粒径细小均匀离散相液滴,获得优质的生物柴油乳化燃油.     

自动折叠喷洒臂的设计及运动学特性

为了解决当前卷盘式喷灌机所配套的喷灌车自动化水平较低的问题,设计了一种基于电动缸驱动的自动折叠喷洒臂,并在喷洒臂之间连接处设计了一种当喷洒臂完全展开时能够实现自密封的端面密封铰链.基于喷洒臂完全折叠时收拢于车架两侧,完全伸展时铰链左右铰合密封等特征建立各杆件参数约束方程,确定了喷洒臂的各杆件尺寸.通过矢量方程法对喷洒臂进行运动学分析,以电动杆推杆的转角、位移、速度、加速度为输入量,各杆件的角位移、角速度、角加速度为输出量,通过Simulink搭建喷洒臂的运动仿真框图并进行分析.结果表明:完全折叠时,喷管1与水平方向呈90°夹角;伸展过程中,各喷管运动平稳,且始终保持在水平直线方向;完全展开时,3个喷管转动90°,且各喷管铰接处完全闭合不发生水泄漏现象,说明设计具有一定的合理性.     

Simulation of future dissolved oxygen distribution in pond culture based on sliding window-temporal convolutional network and trend surface analysis

Dissolved oxygen (DO) is a key ecological factor to measure the quality of water in the aquaculture. As the pond water body is affected by the breeding environment, the spatial distribution of DO shows a certain law in the entire pond. Therefore, to simulate the distribution of DO in aquaculture waters and grasp the temporal and spatial variation of DO is the key to achieving precise regulation of DO. For this purpose, this paper proposed a method for simulating the temporal and spatial distribution of DO in pond culture based on a sliding window-temporal convolutional network together with trend surface analysis (SW-TCN-TSA). This paper first utilized SW to construct DO data sets with different prediction durations, and then used the improved TCN model to realize one-dimensional time series prediction for DO at single monitoring point. Based on the prediction results of DO, a TSA method was performed on the predicted values of DO at the extreme moments of all discrete monitoring points, so as to realize the simulation of the temporal and spatial distribution of DO in the pond. Experimental results show that the SW-TCN model has better prediction performance for one-dimensional time series prediction of DO. Compared with traditional deep networks, such as CNN, GRU, LSTM, CNN-GRU and CNN-LSTM, the values of evaluation indicators (MSE, MAE and RMSE) have been greatly improved. In the process of trend surface fitting, all fitting R² of DO at different water depths are higher than 0.9, indicating that the TSA can accurately reflect the temporal and spatial distribution of DO. This method can provide a basis for the prediction and early warning of DO in the three-dimensional space of the pond and has high practicability in aquaculture.     

带常利率和相依结构更新风险模型的破产概率

研究了一类具有常利率及相依结构的Sparre Andersen模型, 模型中假设理赔间隔时间决定下一次理赔额的分布情况. 对一般分布情形, 利用推广后的调节系数方程与递归更新技巧, 得到了此模型的最终破产概率上界的估计. 最后以理赔额和理赔间隔时间都服从指数分布的情况下的实例分析来说明该模型的有效性.     

改性木屑处理含铬废水的研究

采用磷酸改性木屑后用于含铬废水吸附处理,探讨废水pH值、处理时间、木屑投加量、处理温度4个因素对铬去除率的影响;并拟合25℃改性木屑吸附处理含铬废水的动力学、等温线方程,估算热力学数据。结果表明:木屑对含铬废水有较强去除力,改性木屑去除力加强;改性木屑处理20ml浓度为50mg/L含铬废水的适宜条件为pH值=1～4,处理时间90min,木屑投加量1g,处理温度20～30℃;改性木屑吸附处理含铬废水的动力学特性符合颗粒内扩散方程和二级吸附速率方程;吸附等温线方程符合Langmuir吸附;25℃吸附过程ΔH=-20.489kJ/mol,ΔS=-78.426J/(mol.K),ΔG=2.89kJ/mol。     

重庆南温泉洗浴废水用作植物灌溉水的可行性研究

重庆市温泉资源丰富,温泉洗浴废水运用于绿地灌溉可以节约成本,缓解城市的水危机。温泉洗浴废水对植物生长有正负两方面的影响,与植物的种类,温泉洗浴废水的水质等因素有关。实验以重庆市常见的两种绿地植物——冷水花木春菊为研究对象,对温泉洗浴废水中影响植物生长的pH、固体悬浮物、高锰酸钾,总溶解性固体4个常见指标进行了浓度值对比实验。运用对相对电导率拟合Logistic方程求半致死浓度值的方法,确定绿地植物所能耐受的上限阀值。以此为基础对温泉废水进行相关处理,使温泉废水既可以达到灌溉绿地的水质标准,又能最大限度地降低废水处理成本,从而充分利用水资源。     

基于模拟退火算法优化给水管线造价公式研究

给水管线造价公式的精确性对工程经济分析与给水管网优化的科学性和经济性有重大影响。通过五个地区的铸铁管综合单价数据,采用最小二乘法对各组数据进行多项式一至十次的拟合,确定了给水管线造价公式的最佳拟合次数为三次;进一步采用模拟退火算法对拟合的多项式参数进行优化计算,求解给水管线造价公式。结果表明:凭借模拟退火算法随机全局搜索模式以及不受函数性质影响的优势,能够克服传统算法难以求解多阶导数的困难,提高公式拟合精度。     

Flexure-torsion Analysis of Variable-curvature-box Girder Considering Non-coincidence of Torsion Center and Gravity Center

In order to consider the effect of non-coincidence of torsion center and gravity center,the rectangular variable-curvature-box girder with vertical symmetrical axis is studied. Considering the influence of shear deflection and non-coincidence of torsion center and gravity center, the elastic equilibrium formulas are established. Based on deformation equations of the girder and the relations of inner forces and deformations,the flexure-torsion differential equations are developed. The equilibrium differential equations and Galerkin methods formulas for clothoid curved box girder are presented.