北京地区几个造林树种耗水性比较研究

利用热扩散式边材液流探针于 2 0 0 0— 2 0 0 1年 ,在北京西山地区北京林业大学教学实习林场对油松、侧柏、刺槐、栾树、臭椿和君迁子等树种的蒸腾耗水性进行了对比研究 .结果发现 ,树种之间在耗水量、耗水节律、耗水生态对策 ,以及耗水的调节机制方面存在很大差异 .其中 ,树木的叶片蒸腾速率、树干木质部边材宽度、边材导管分布与形态特征、根系空间分布特征等因素对单木耗水量均有不同程度影响 .通过比较发现 ,油松液流通量显著大于侧柏 ;刺槐、栾树、臭椿和君迁子 4个树种中栾树单木耗水速率最高 ,其次是臭椿 ,刺槐和君迁子最低 .     

Settling velocity characterization of aquacultural solids

A top-loading settling column is described and used to characterize the settling properties of the solids in the discharge water from a commercial rainbow trout production facility. Mass-based and phosphorus-based settling curves are presented. The median settling velocity on a mass-basis for the settleable solids was 1.7 cm s⁻¹. The median settling velocity for the settleable phosphorus was 1.15 cm s⁻¹. Manually stripping fecal material from rainbow trout resulted in settleable solids with a median settling velocity of 0.7 cm s⁻¹. Examination of the settling velocity curves show that halving the overflow rate (OFR) from 2 to 1 cm s⁻¹ changes the removal efficiency from 0.61 to 0.73, an increase of about 20%. Halving the OFR again to 0.5 cm s⁻¹ increases the removal efficiency to 0.81, an improvement of about 11%. Settling characteristics of aquacultural solids will vary from facility to facility. The methods described in this paper can be used to perform a similar type of analysis at other aquacultural sites, which may be growing other species under different management regimes.     

冲击式速冻设备上下送风速度对虾仁冻结过程的影响

随着人们对速冻食品品质的要求不断提高,商家对食品速冻技术的要求也在不断提高,冲击式速冻技术作为目前先进的速冻技术之一成为研究热点。但由于其高速射流冲击导致的内部换热区流场的不均匀会造成设备换热效率差,能效比低等问题。为找到使得设备换热区流场最优的送风速度,该文以明虾虾仁为研究对象,利用数值模拟结合试验验证的方法研究了冲击式速冻设备中上下送风速度对虾仁冻结过程的影响,分为上下两侧风速保持一致且同时改变;上侧送风速度为15 m/s、下侧为0~15 m/s;以及下侧送风速度为15 m/s、上侧为0~15 m/s 3个试验组进行研究。研究结果为:当冲击式速冻设备两侧送风速度保持一致时,随着风速的增大,虾仁冻结时长缩短但减小幅度也会不断减小;当上下两侧送风速度大小相差悬殊时,两股冲击射流相对冲击会在低速侧形成促进虾仁表面流场流动的涡流,提高换热效率,减小虾仁冻结时长;当上下两侧送风速度大小相差不大时,两股冲击射流相对冲击会在虾仁表面形成流速较低的射流"真空区",降低虾仁换热效率,增大虾仁冻结时长;在试验的两侧送风速度范围内,当上侧送风速度为15 m/s,下侧送风速度为2 m/s时,虾仁对流换热强度最大,冻结时长最短。     

不同水流速度对中华倒刺鲃幼鱼自由基代谢的影响

在(25±0.5) ℃下, 设置4个水流速度实验组, 分别为静水对照组0 bl/s(体长/秒)、1.0 bl/s组、2.0 bl/s组和4.0 bl/s组, 研究不同水流速度对中华倒刺鲃(Spinibarbus sinensis)幼鱼肌肉自由基代谢的影响, 训练周期为8周。结果显示, 肌肉超氧化物歧化酶(SOD)和谷胱甘肽过氧化物酶(GSH-P_X)的活性随着水流速度的增加而升高, 训练组过氧化氢酶(CAT)活性出现不同程度的下降, 而抗氧化物谷胱甘肽(GSH)的含量未发生明显变化(P>0.05); 训练组肌肉总抗氧化能力(T-AOC)均高于对照组, 2.0 bl/s组最高, 4.0 bl/s组次之, 1.0 bl/s组最低, 且2.0 bl/s和4.0 bl/s组T-AOC与对照组有显著性差异(P<0.05)。8周训练后, 2.0 bl/s组丙二醛(MDA)含量显著低于其他3组(P<0.05), 而H₂O₂含量随着水流速度增加呈上升趋势。8周运动训练对骨骼肌B细胞淋巴瘤因子-2 (Bcl-2)、Bcl-2相关X蛋白(Bax)的含量及血清肌酸激酶(CK)活性无显著影响(P>0.05), 但2.0 bl/s组Bax和Bax/ Bcl-2显著低于4.0 bl/s组(P<0.05)。结果表明, 2.0 bl/s的水流速度可提高中华倒刺鲃肌肉的抗氧化能力, 降低脂质过氧化水平, 并在一定程度上抑制肌细胞凋亡。

     

逆流运动训练对多鳞四须鲃摄食、生长和体营养成分的影响

在室内条件下［水温(28?1) ℃］,设置0.7 BL/s和2.0 BL/s 2个流速组以及一个静水对照组,研究了不同逆流运动训练对多鳞四须鲃幼鱼［体质量(75.21?2.82) g］摄食、生长和体营养成分的影响。实验分1~23 d和23~45 d两个阶段,共进行45 d。实验结果表明,多鳞四须鲃平均日摄食率随流速增加而增大,但体长特定生长率、体质量特定生长率和食物转换率均以0.7 BL/s组最高,静水组次之,2.0 BL/s组最低,且三者间差异显著(P<0.05)。不同流速下多鳞四须鲃肌肉水分和灰分含量差异不显著(P>0.05),但随流速增大,多鳞四须鲃肌肉中蛋白质含量增加,而脂肪含量却显著下降。在实验末期,2.0 BL/s流速组的氨基酸总含量(82.63%)、必需氨基酸总含量(34.34%)和鲜味氨基酸总含量(33.50%)均显著高于静水对照组(78.27%,32.6%,30.63%)(P<0.05)。研究表明,较低流速(0.7 BL/s)的运动训练明显促进多鳞四须鲃的生长,提高食物转化率和增加肌肉蛋白质含量,高流速(2.0 BL/s)的运动训练不利于生长,但却能显著提高肌肉必需氨基酸和鲜味氨基酸含量。     

不同结构尼龙网防风效应的风洞模拟

为对比不同结构尼龙网不同风速下的防风效应,开展对均匀型(A)、上密下疏型(B)、上疏下密型(C)3种不同结构尼龙网在6 m·s~(-1)、9 m·s~(-1)、12 m·s~(-1)指示风速下的风洞模拟试验。通过对不同结构尼龙网各风速下加速率等值线图和防风效能的对比分析,结果表明:1 3种结构尼龙网风场存在相似性但差异明显。B型尼龙网风影区下部存在加速区,A、C型则不存在;C型风影区中心位置较低。2 A、C型尼龙网防风效应随风速增大而降低,B型则相反。3测量范围内C型尼龙网防风效应明显优于A、B型。实际应用中应综合考虑沙障结构、风况等因素,尼龙网栅栏的布设建议选用上疏下密型结构。     

对多分子马达输运中货物速度的讨论

从朗之万方程出发；对多分子马达输运过程中的货物速度进行了修正，得到了货物速度和马达个数的关系，修正以后的结果与试验值符合的相当好．为多分子马达输运机制的研究提供了新的思路和方法。     

Enhancement of photosynthesis and growth of tomato seedlings by forced ventilation within the canopy

A forced ventilation system that directs airflow upward or downward within a canopy was developed for plant culture in order to enhance photosynthesis and growth of the plant canopy. Tomato seedling canopies including the seedlings, growing medium, and a plastic tray were used for the experiments. In the upward and downward ventilation systems, air flows upward and downward, respectively, within the plant canopy; this is achieved by blowing and drawing air from holes (Ø 6 mm) made in plastic pipes positioned on the surface of the growing medium. A horizontal airflow system was used as a conventional system to compare the performance of the experimental ventilation systems. Using the upward and downward ventilation systems, the effects of air directions and air velocities on the CO₂ exchange rate of the tomato seedling canopy and the growth of the seedlings were compared with those observed using the conventional horizontal airflow system. The forced ventilation within the plant canopy enhanced the CO₂ exchange rate of the canopy and the dry masses of the seedlings by 1.4–1.5 and 1.2–1.3 times, respectively, as compared to the conventional horizontal airflow. When the leaf area index (LAI) increased from 1.2 to 2.4, there was only a 5% decrease in the CO₂ exchange rate per unit leaf area in the downward ventilation system, whereas there was a 20% decrease in the CO₂ exchange rate per leaf area in the horizontal airflow system. The coefficient of variation for the dry mass of the seedlings was higher in the downward system than in the other systems. These results demonstrate that forced ventilation within the canopy is an effective technique to enhance the gas exchange of the plant canopy and the consequent plant growth.     

Ni—Si—B系非晶合金的结晶度与退火时间的关系

对Ｎｉ６４Ｓｉ１５Ｂ２１非晶合金条带在２５０℃不同退火时间下的结晶度进行了测定。得到了结晶与度火保温时间呈抛物线关系的实验规律。     

无级变速拖拉机跃度最优化调速控制

针对无人驾驶拖拉机加减速导致的作业平稳性低和燃油经济性差等问题，该研究基于CVT（constantly variable transmission，无级变速传动）拖拉机，设计了一种基于贝尔曼最优性原理的最小跃度多项式局部速度规划算法。基于贝尔曼最优性原理和最优控制思想设计全局规划目标、局部规划目标及约束，提出基于最小跃度多项式的局部速度规划算法并开发速度跟随控制系统。田间试验表明，相对于无最优化调速技术的对照组，U型掉头的速度误差平均值和均方根分别降低42.31%和50.75%，加速度平均值与方差分别降低8.26%和16.36%，跃度平均值与方差分别降低7.65%和14.23%，发动机转速方差降低63.36%，发动机扭矩百分比方差降低60.26%，瞬时油耗方差降低71.25%，总油耗降低2.37%。直线行驶调速效果呈现相同趋势，与对照组相比，速度误差平均值和均方根分别降低9.45%和11.14%，加速度平均值与方差分别降低6.03%和13.68%。跃度平均值和均方根分别降低1.55%和3.59%。发动机转速方差降低31.78%，发动机扭矩百分比方差降低25.13%，瞬时油耗方差降低31.82%，总油耗降低2.48%。所提方法满足无级变速拖拉机无人驾驶速度平稳切换需要，并提高了燃油经济性。