对加快发展阿克苏地区机采棉技术的思考

机采棉技术是一项优质、高产、高效的综合机械化技术,大力推广机采棉技术,不仅解决了拾花难这一难题;而且提高了工作效率,降低了生产成本,实现了节本增效;使我区机采棉技术走上规模化生产、专业化管理、集约化发展道路。     

四种替代药剂对梨火疫病菌的抑制活性及其田间防效

为筛选农用链霉素替代药剂,以其为对照药剂,测定春雷霉素、中生菌素、噻霉酮和噻菌铜这4种常用细菌病害防治药剂对梨火疫病菌Erwinia amylovora的抑制活性、对梨火疫病的田间防效及不同药剂处理后梨中的农药残留,并对这4种药剂的作物安全性进行评价。结果表明,中生菌素、噻霉酮和春雷霉素对梨火疫病菌有抑制作用,抑制中浓度EC50分别为1.60、6.64和60.57 mg/L,中生菌素的抑制效果高于链霉素。在连续2年田间试验中,中生菌素1 000倍液和春雷霉素400倍液对梨火疫病的保护效果和治疗效果均达90.33%以上,噻霉酮500倍液和噻菌铜200倍液对梨火疫病的保护效果均达100.00%,治疗效果均超过86.97%,与对照药剂农用链霉素2 000倍液的效果相当。所有药剂处理后均未检出中生菌素、春雷霉素、高效氯氰菊酯和农用链霉素的农药残留,而噻虫嗪、阿维菌素和矮壮素虽有检出,但其残留量均低于国家限量标准。花期前后、幼果期和果实膨大期施药,中生菌素、春雷霉素、噻霉酮和噻菌铜对梨花、叶片、枝梢及果实生长均无不良影响。综合来看,中生菌素、春雷霉素、噻霉酮和噻菌铜均可作为农用链霉素的替代药剂,...     

Evaluation of the pattern of spray released from a moving multicopter

BACKGROUND

Multicopters are used for releasing particulates seeds, fertilizer and spray. Their low cost and high manoeuvrability make them attractive for spraying in steep terrain and areas where overspray is undesirable. This article describes a model of multicopter wake and its influence on particulate dispersion, which is computationally economical compared to many computational fluid dynamics (CFD) approaches, yet retains reasonable accuracy.

RESULTS

A model was successfully implemented in OpenFOAM . It features source terms for the rotor wash, Lagrangian particle tracking, an evaporation model, and a porous medium approach to model the effect of the ground vegetation. Predictions were validated against the field tests of Richardson et al. which used a DJI Agras MG-1 multicopter in three different flights with airspeeds of 3.2–4.9 m s⁻¹, ground speeds of 2.1–2.9 m s⁻¹ and cross-wind speeds of 0.04–2.2 m s⁻¹. The effective swath width (30% line separation) was predicted to within one standard deviation. Sensitivity to a rotor rotational speed, flight height, flight velocity, multicopter roll and yaw angles, surface roughness length, plant height and leaf density was checked.

CONCLUSION

In all flight trials, the modelled swath was closest to the experimentally obtained swath when the surface roughness of the fetch was equal to 0.5 m (bushes) and the rotational speed of all rotors was equal to 2475 rpm with 0.75R (0.2 m) tall plant canopy (grass) introduced to the model. The model showed acceptable validity for flight velocities of ≤2.8–5 m s⁻¹ when flight parameters can be approximately estimated. © 2022 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.     

Application and mechanisms of metal-based nanoparticles in the control of bacterial and fungal crop diseases

Nanotechnology is a young branch of the discipline generated by nanomaterials. Its development has greatly contributed to technological progress and product innovation in the field of agriculture. The antimicrobial properties of nanoparticles (NPs) can be used to develop nanopesticides for plant protection. Plant diseases caused by bacterial and fungal infestations are the main types of crop diseases. Once infected, they will seriously threaten crop growth, reduce yield and quality, and affect food safety, posing a health risk to humans. We reviewed the application of metal-based nanoparticles in inhibiting plant pathogenic bacteria and fungi, and discuss the antibacterial mechanisms of metal-based nanoparticles from two aspects: the direct interaction between nanoparticles and pathogens, and the indirect effects of inducing plant resilience to disease. © 2022 Society of Chemical Industry.     

Challenges and opportunities of unmanned aerial vehicles as a new tool for crop pest control

The application of pesticides is not simply delivering chemicals to the target area. It also involves considering the negative aspects and developing strategies to deal with them during the application process, to ensure the maximization of pesticides use efficiency and the maintenance of the ecosystem. Unmanned aerial vehicle (UAV) sprayers demonstrate unique advantages compared to traditional ground sprayers, particularly in terms of maneuverability and labor intensity reduction, showed great potential for chemical application in pest control. It is undeniable that there exist challenges in the practice of UAV spraying, such as higher potential risks of pesticide drift or pathogen transmission, uncertainty canopy deposition for different crops, and unexpected leaf breakage induced by downwash flow. Maximizing the utilization of downwash flow while avoiding lateral air movement outside the intended target crop area is a major issue for chemical application with UAV sprayers, particularly in light of the increasingly apparent consensus on the need for enhanced environmental protection during the chemical application process. It must be considered that the operation strategy in different scenarios and for different crop targets is not the same, unique requirements should be given on nozzle atomization, flight parameters, adjuvants and aircraft types in specific working situations. In future, the implementation of spray drift prediction, technical procedures development, and other solutions aimed at reducing pesticide drift and improving deposition quality, is expected to promote the adoption of UAV sprayers by more farmers. © 2023 Society of Chemical Industry.     

充分发挥农业机械化在农业科技创新中的主导作用

文章结合辽阳地区农业机械化实际,从培育新型农业主体,构建新型农业服务体系和培养新型的农机技术人员三方面做了现状分析,论述了农机作业质量的重要性及发挥农机化作用的思考,旨在充分发挥农业机械化在农业科技创新中的主导作用。     

企业文化在农机化服务体系建设中的作用

企业文化是企业可持续发展的精神支柱,为企业发展提供核心竞争力。针对企业文化建设中的认识误处,分析了企业文化与农业机械化服务组织的关系,阐述了企业文化在农机化服务体系建设中的作用。对开展企业文化建设,推动农机化服务体系健康发展具有重要意义。     

生物质能源作物——能源甜菜的开发利用

随着全世界能源物质的不断扩展,可再生的生物质能源将是21世纪主要的能源物质。能源甜菜是新兴的可再生能源作物,它具有生物学产量高,乙醇转化率高,含糖量适中等特点,是取之不尽、用之不竭的环保能源,对环境几乎没有污染;同时又是糖饲兼收的作物。利用能源甜菜通过酒精发酵创造乙醇燃料新能源,可以减轻或消除与粮食争地的矛盾,是保证粮食安全和能源安全的双赢举措。     

Effect of Timing and Nitrogen Fertilizer Application on Winter Oilseed Rape (Brassica napus L.). I. Growth Dynamics and Seed Yield

The field experiments conducted on the grey‐brown podzolic soil in the four growing seasons (1998–2001) at Krzeslice Farm, central‐western Poland comprised seven fertilization variants: 80_NF + 80_CAN; 80_CAN + 80_CAN; 80_AN + 80_AN; 80_NF + 50_CAN + 30_CN; 80_CAN + 50_CAN +30_CN; 80_AN + 50_AN + 30_CN (where NF – nitrofos NPK; CAN – calcium‐ammonium nitrate; AN – ammonium nitrate; CN – calcium nitrate) and control (without N) applied in split rates at the beginning of spring regrowth (80 kg N ha^?1), stem elongation (80 or 50) and flower buds visible stages (30). The yielding effect of tested fertilization variants was significant in comparison with the control (2.24 t ha^?1). The highest mean seed yield (3.64 t ha^?1) was collected from 80_AN + 80_AN and 80_CAN + 80_CAN variants. Mean values of 4 years indicate that the second N rate division (80 + 50 + 30) decreased yield, although not significantly in comparison with these two N treatments. Plants grown on these treatments have developed different patterns of growth to yield the seeds. These patterns were characterized by very high crop growth rate during flowering (above 21 g m^?2 day^?1) and negative at maturation (down to ?2.5 g m^?2 day^?1). Plants fertilized with ammonium nitrate (80_AN + 80_AN) reached maximum growth rate earlier (65 days), which lasted longer (20 days) than plants fertilized with calcium‐ammonium nitrate (71 days lasting 17.5 days). Plants grown on the control treatment reached the highest crop growth rate within 79 days (14.8 g m^?2 day^?1), which lasted 15 days.