竖壁贴附送风改善冷藏库内流场特性

果蔬贮藏期间,冷藏库内的气流分布是影响果蔬贮藏品质和送风能量利用率的关键因素,合理的气流组织对冷藏库内流场分布是至关重要的。该研究以某苹果冷藏库为研究对象,采用竖壁贴附送风方式,并对其流场建立了三维稳态的SST湍流模型来研究库内流场的分布特性以及货物的冷却效果,同时与传统的冷风机直吹送风的流场特性进行了对比。结果表明：在相同送风量下,相比冷风机直吹送风方式,竖壁贴附送风使得库内温度不均匀系数和速度不均匀系数分别降低了31%和47%。而且竖壁贴附送风使库内空气与货物的换热更加充分,进而使得送风的能量利用率提高了19%。因此,竖壁贴附送风方式应用于冷藏库是一种有效且节能的气流组织方式。     

基于集对分析的区域水资源开发利用综合评价

基于集对分析方法建立了区域水资源开发利用程度的评价模型，并应用该模型对汉中盆地水资源的开发利用程度进行了综合评价。评价结果表明，汉中盆地水资源利用处于中、低级阶段，还有很大的开发潜力。通过与模糊模式识别、模糊综合评判、属性识别方法、人工神经网络方法进行对比分析，可以看出集对分析模型不仅理论严谨、方法简便，而且评价结果精确可靠，从而验证了该方法的合理性和可行性。因此，集对分析理论为区域水资源开发利用程度的综合评价提供了一种新的思路。     

三自由度并联机构位置和运动分析及仿真

分析了一种两平移一转动三自由度并联机构,得到该机构位置正反解析解,采用求导法得到其一阶和二阶运动影响系数。利用运动影响系数对该机构进行了速度和加速度分析,并在ADAMS软件上进行仿真,验证了该理论分析的正确性。同时,提供了该机构在中医推拿方面的具体应用实例。     

The Particle Properties of Panzhihua Vanadium-Bearing Titanomagnetite Concentrate

In order to investigate how to increase the concentrate sintering productivity,the particle properties of the concentrate have been studied. It was found that the essential reasons for low sintering productivity are the difficulties to pelletize and poor permeability because of particle' s size bigger,smooth surface, poor activity and hydrophobe.     

Study on Analysis Methods for Rock Slope FoundationStability of the Highrise Building

Based on the practical project a study on analysis methods for rock slope foundation stability of highrise-building project criterion transfer coefficient method, rotation limit equilibrium method (Sweden slices method) and finite element method was carried out.The authors found that safety factor of criterion transfer coefficient method is larger than that of rotation limit equilibrium method, but is similar to the results of finite element method. So, when rockslope foundation stability of highrise building is to be analysed,the rotation limit equilibrium method is suggested to use.     

水重力式马铃薯静摩擦因数测定仪设计与试验

针对传统斜面法测定马铃薯静摩擦因数存在工作效率、精度较低等问题,提出水重力式马铃薯静摩擦因数测定原理,通过精确控制水的重力来确定马铃薯的静摩擦力,进而计算静摩擦因数,据此设计了马铃薯静摩擦因数测定仪。对甘肃省普遍种植的陇薯10号品种进行静摩擦因数测定。结果表明：带土马铃薯与钢板之间的静摩擦因数为0.420,与塑料板之间的静摩擦因数为0.496,马铃薯之间静摩擦因数为0.442;不带土马铃薯与钢板之间的静摩擦因数为0.455,与塑料板之间的静摩擦因数为0.526,马铃薯之间的静摩擦因数为0.483。由此可见,带土马铃薯的静摩擦因数较不带土马铃薯小,静摩擦因数从大到小依次为：马铃薯与塑料板之间、马铃薯之间、马铃薯与45号钢板之间。为进一步验证重力法的可靠性,进行马铃薯坍塌堆积角仿真和试验。结果发现：重力法条件下不带土马铃薯形成的堆积角与试验结果较接近,其相对误差为1.04%,斜面法条件下不带土马铃薯形成的堆积角与试验结果相对误差为7.73%;斜面法条件下带土马铃薯形成的堆积角与试验结果较接近,其相对误差为0.37%,重力法条件下的堆积角与试验结果的相对误差为4.31%。重力法可以测定马铃薯...     

秸秆旋埋还田后空间分布效果仿真与试验

对传统旋耕机(TR)、秸秆旋埋还田机(SR)和深松+秸秆旋埋还田机(SSR)进行了秸秆还田离散元仿真和田间试验对比。通过设计的秸秆三维坐标测量装置对秸秆在土壤中的空间坐标进行了测量,并在三维绘图软件中还原了秸秆在土壤中的空间状态,及秸秆在三维图中量化及可视化显示。对取样立方体进行分层、横向及纵向划分等探究了秸秆在土壤中垂直分布及水平分布的均匀性。利用离散元软件建立了相应的仿真模型,并与田间试验设定了相同的作业参数,在仿真作业完成后,通过设置不同尺寸的Geometry Bin计算区域内秸秆数量,并分别对应实际田间作业的分层、横向和纵向划分。在分层处理中,仿真与实测结果表明,SR和SSR埋入土壤中的秸秆量都明显大于TR,尤其是埋入土壤下层的秸秆量均是TR的数倍。TR、SR和SSR作业后各层秸秆占比仿真值和实测值的变异系数均呈递减趋势,其中SSR的变异系数最小,分别为28. 8%和28. 7%。3种耕作装备下仿真值与实测值的变异系数相差不大,平均误差为9. 6%。横向和纵向划分中,TR、SR和SSR的各区域秸秆占比仿真值和实测值的变异系数无绝对规律,SSR的变异系数均最小。离散元仿真和田间试验结果表明,SSR秸秆还田后,秸秆在土壤中垂直分布和水平分布的均匀性均最优。离散元仿真较好地拟合了实际田间作业后秸秆的空间分布状态,相对误差在可接受范围内。     

低压管道环状管网水力计算

本文对环状管网运行中仅开启一个出水口的水力计算方法进行了探讨。计算出了特征长度系数、平均特征长度系数和最大特征长度系数,并将其排成数表供直接查用。同时计算出了双环管网平均和最大特征长度系数的回归方程,经比较,本文提出的计算方法简单、可靠,便于设计中应用。     

Simulation of transpiration, drainage, N uptake, nitrate leaching, and N uptake concentration in tomato grown in open substrate

Free-drainage or “open” substrate system used for vegetable production in greenhouses is associated with appreciable NO₃⁻ leaching losses and drainage volumes. Simulation models of crop N uptake, N leaching, water use and drainage of crops in these systems will be useful for crop and water resource management, and environmental assessment. This work (i) modified the TOMGRO model to simulate N uptake for tomato grown in greenhouses in SE Spain, (ii) modified the PrHo model to simulate transpiration of tomato grown in substrate and (iii) developed an aggregated model combining TOMGRO and PrHo to calculate N uptake concentrations and drainage NO₃⁻ concentration. The component models simulate NO₃⁻-N leached by subtracting simulated N uptake from measured applied N, and drainage by subtracting simulated transpiration from measured irrigation. Three tomato crops grown sequentially in free-draining rock wool in a plastic greenhouse were used for calibration and validation. Measured daily transpiration was determined by the water balance method from daily measurements of irrigation and drainage. Measured N uptake was determined by N balance, using data of volumes and of concentrations of NO₃⁻ and NH₄⁺ in applied nutrient solution and drainage. Accuracy of the two modified component models and aggregated model was assessed by comparing simulated to measured values using linear regression analysis, comparison of slope and intercept values of regression equations, and root mean squared error (RMSE) values. For the three crops, the modified TOMGRO provided accurate simulations of cumulative crop N uptake, (RMSE = 6.4, 1.9 and 2.6% of total N uptake) and NO₃⁻-N leached (RMSE = 11.0, 10.3, and 6.1% of total NO₃⁻-N leached). The modified PrHo provided accurate simulation of cumulative transpiration (RMSE = 4.3, 1.7 and 2.4% of total transpiration) and cumulative drainage (RMSE = 13.8, 6.9, 7.4% of total drainage). For the four cumulative parameters, slopes and intercepts of the linear regressions were mostly not statistically significant (P < 0.05) from one and zero, respectively, and coefficient of determination (r²) values were 0.96-0.98. Simulated values of total drainage volumes for the three crops were +21, +1 and −13% of measured total drainage volumes. The aggregated TOMGRO-PrHo model generally provided accurate simulation of crop N uptake concentration after 30-40 days of transplanting, with an average RMSE of approximately 2 mmol L⁻¹. Simulated values of average NO₃⁻ concentration in drainage, obtained with the aggregated model, were −7, +18 and +31% of measured values.     

Determination of growth-stage-specific crop coefficients (Kc) of cotton and wheat

Development of crop coefficient (Kc), the ratio of crop evapotranspiration (ETc) to reference evapotranspiration (ETo), can enhance ETc estimates in relation to specific crop phenological development. This research was conducted to determine growth-stage-specific Kc and crop water use for cotton (Gossypium hirsutum) and wheat (Triticum aestivum) at the Texas AgriLife Research field at Uvalde, TX, USA from 2005 to 2008. Weighing lysimeters were used to measure crop water use and local weather data were used to determine the reference evapotranspiration (ETo). Seven lysimeters, weighing about 14 Mg, consisted of undisturbed 1.5 m × 2.0 m × 2.2 m deep soil monoliths. Six lysimeters were located in the center of a 1-ha field beneath a linear-move sprinkler system equipped with low energy precision application (LEPA) and a seventh lysimeter was established to measure reference grass ETo. Crop water requirements, Kc determination, and comparison to existing FAO Kc values were determined over a 2-year period on cotton and a 3-year period on wheat. Seasonal total amounts of crop water use ranged from 689 to 830 mm for cotton and from 483 to 505 mm for wheat. The Kc values determined over the growing seasons varied from 0.2 to 1.5 for cotton and 0.1 to 1.7 for wheat. Some of the values corresponded and some did not correspond to those from FAO-56 and from the Texas High Plains and elsewhere in other states. We assume that the development of regionally based and growth-stage-specific Kc helps in irrigation management and provides precise water applications for this region.