日本落叶松无性系微纤丝角遗传变异的研究

对10个10年生日本落叶松无性系的早材和晚材微纤丝角进行了测定,结果表明:早、晚材微纤丝角无性系间差异极显著,同一年轮内早材微纤丝角大于晚材.日本落叶松微纤丝角的径向变异规律为:在髓心处最大,以后逐渐减小.早、晚材微纤丝角与树木年轮间的变异模式(径向变异)以对数和乘幂式方程拟合效果较好,R2(R为相关系数)均在0.8以上.早、晚材微纤丝角同树高、形率、树皮厚度、主枝粗、枝干比、主枝夹角、主枝长的相关关系不显著,早、晚材微纤丝角同胸径、冠幅的相关关系达到显著水平;早材与晚材的微纤丝角也相关显著.早材和晚材的微纤丝角受中到强度遗传控制,广义遗传力分别为0.767 4、0.804 3.按照20%的选择率,早材和晚材的微纤丝角的遗传增益分别为21.82%和29.75%.     

高异交率粳型不育系辽30A的选育与应用

辽30A是辽宁省稻作研究所杂优育种室于2000年4月育成的株型理想、米质优、高柱头外露率、高异交率的紧穗BT型粳稻不育系。在选育过程中以多元复交材料为保持系，从低世代开始边选择边回交进行核置换，加快了育种速度，提高了育种效率。已于2002年9月通过辽宁省技术鉴定。     

Genetic mapping,marker assisted selection and allelic relationships for the Pu6 gene conferring rust resistance in sunflower

Rust resistance in the sunflower line P386 is controlled by Pu₆, a gene which was reported to segregate independently from other rust resistant genes, such as R₄. The objectives of this work were to map Pu₆, to provide and validate molecular tools for its identification, and to determine the linkage relationship of Pu₆ and R₄. Genetic mapping of Pu₆ with six markers covered 24.8 cM of genetic distance on the lower end of linkage Group 13 of the sunflower consensus map. The marker most closely linked to Pu₆ was ORS316 at 2.5 cM in the distal position. ORS316 presented five alleles when was assayed with a representative set of resistant and susceptible lines. Allelism test between Pu₆ and R₄ indicated that both genes are linked at a genetic distance of 6.25 cM. This is the first confirmation based on an allelism test that at least two members of the R_adv/R₄/R₁₁/ R_13a/R_13b/Pu₆ cluster of genes are at different loci. A fine elucidation of the architecture of this complex locus will allow designing and constructing completely new genomic regions combining genes from different resistant sources and the elimination of the linkage drag around each resistant gene.     

日本落叶松幼一成龄相关选择模型及早期选择策略

利用日本落叶松半同胞子代测定林的材料，以线性函数式、对数函数式及二次抛物线函数式拟合遗传力平方根比率和幼一成龄遗传相关系数随相对年龄变化的趋势，以年遗传增益作为评价指标，构建最大年遗传增益模型。根据轮伐年龄及估算的最佳早期选择年龄和早期选择效率，确定了日本落叶松逐步选择的早期选择策略。对于轮伐龄材积的选择，以树高作为早期选择指标较为适宜，若轮伐龄为２０ａ，可采取一次选择，分别在２年生及７～８年生时进行；若轮伐龄定为４０ａ，则采取３次选择，分别在３、１２和１５～１６年生时进行。     

长白落叶松纸浆材优良家系多性状联合选择研究

采用胸径木芯与伐倒木取样方法,对24年生长白落叶松优树子代测定林14个处理的生长性状、木芯材质性状、解析木材质性状及其制浆造纸特性进行了研究,结果表明:生长性状、木芯基本密度、木芯管胞性状均存在丰富的变异;家系间生长性状差异极显著;木芯基本密度、木芯管胞性状差异显著,家系遗传力在0.56 0.80之间;解析木基本密度、早材微纤丝角、管胞长度、早材壁腔比、木质素、阿拉伯糖含量、抗张强度、撕裂度等差异极显著,家系遗传力在0.64 0.86之间;晚材率、管胞长宽比、综纤维素含量等差异显著,家系遗传力在0.51 0.61,家系水平的材性改良潜力较大。生长性状与木芯管胞长度呈极显著正相关,与木芯基本密度、管胞长宽比相关不显著;木芯基本密度、管胞长度、管胞宽度以及管胞长宽比与解析木相应性状呈极显著正相关关系,且回归模型较为理想,可以利用胸径木芯各性状值预测其单株值,间接选择和评价纸浆材优良家系。通过生长性状、木芯基本密度和木芯管胞长宽比综合分析选出166、169为优良家系,根据解析木生长、材质以及纸张物理性状选出的优良家系与其结果一致。优良家系材积、木芯基本密度和木芯管胞长宽比的遗传增益(超过对照)分别为48.34%(38.80%)、14.01%(3.63%)和19.89%(6.42%)。     

南亚橡胶种质圃部分橡胶品系幼树2007／2008年的寒害调查与分析

对南亚热带作物研究所橡胶繁育圃2007／2008年低温寒害后的不同橡胶树品系的受害情况进行调查。橡胶品系随苗龄的增长其抗寒性逐步提高;湛试系列橡胶品系抗寒性总体较好;用抗寒品系作亲本与高产品系常规杂交有选育出抗寒高产新品系的可选择性。     

Genome-wide detection of selective signatures in a Jinhua pig population

The aim of this study was to detect evidence for signatures of recent selection in the Jinhua pig genome. These results can be useful to better understand the regions under selection in Jinhua pigs and might shed some lights on groups of genes that control production traits. In the present study, we performed extended haplotype homozygosity(EHH) tests to identify significant core regions in 202 Jinhua pigs. A total of 26 161 core regions spanning 636.42 Mb were identified, which occupied approximately 28% of the genome across all autosomes, and 1 158 significant(P0.01) core haplotypes were selected. Genes in these regions were related to several economically important traits, including meat quality, reproduction, immune responses and exterior traits. A panel of genes including ssc-mir-365-2, KDM8, RABEP2, GSG1L, RHEB, RPH3AL and a signal pathway of PI3K-Akt were detected with the most extreme P-values. The findings in our study could draw a comparatively genome-wide map of selection signature in the pig genome, and also help to detect functional candidate genes under positive selection for further genetic and breeding research in Jinhua and other pigs.     

Selecting the hologenome to breed for an improved feed efficiency in pigs—A novel selection index

Most traits in animal breeding, including feed efficiency traits in pigs, are affected by many genes with small effect and have a moderately high heritability between 0.1 and 0.5, which enables efficient selection. Since the microbiota composition in the gastrointestinal tract is also partly heritable and was shown to have a substantial effect on feed efficiency, the host genes affect the phenotype not only directly by altering metabolic pathways, but also indirectly by changing the microbiota composition. The effect of the microbiota composition on the breeding value of an animal is the conditional expectation of its breeding value, given the vector with microbiota frequencies, that is The breeding value of an animal can therefore be decomposed into a heritable contribution that arises from an altered microbiota composition and a heritable contribution that arises from altered metabolic pathways within the animal, so Instead of selecting for breeding value , an index comprising the two components and with appropriate weights, that is , can be used. The present study shows how this breeding strategy can be applied in pig genomic selection breeding scheme for two feed efficiency traits and daily gain.     

The value of incorporating carcass trait phenotypes in terminal sire selection indexes to improve carcass weight and quality of heavy lambs

Genetic selection for carcass traits is paramount to maximize the profitability and long‐term sustainability of any meat‐producing livestock species. The main objectives of this research were to evaluate the efficiency of indicator traits for the genetic improvement of lamb carcass traits and to determine the value of including carcass traits into terminal sire selection indexes for the Canadian sheep industry. The carcass traits included hot carcass weight (HCW), fat depth at the GR site (FATGR) and average carcass conformation score (AVGCONF), and were measured on heavy lambs (slaughter age less than 365 days and HCW greater than 16.3 kg) in commercial abattoirs. Growth traits were found to be moderately efficient indicator traits for the genetic improvement of HCW but selection on ultrasound traits was necessary to substantially improve the carcass quality traits (FATGR and AVGCONF). Economic selection indexes were designed by adding various combinations of carcass traits into the Canadian Sheep Genetic Evaluation System terminal indexes. Records measured on individuals and progeny were assumed to be the sources of information for live animal and carcass traits, respectively. The changes in index accuracy, efficiency and expected correlated response were used to assess the value of their inclusion. HCW was found to have a large economic value, and its inclusion into terminal selection indexes was expected to substantially increase their accuracy (0.08–0.12 points) and efficiency (20%–30%). However, further including FATGR (measured 110 mm from the carcass midline over the 12th rib) and AVGCONF had little impact on the accuracy (≤0.03) and efficiency (1%–7%) of the proposed indexes. Thus, the inclusion of carcass traits into the existing terminal selection indexes could be beneficial for the genetic improvement of HCW, but further research is needed to determine optimal methods of increasing carcass fatness and muscularity.     

Decision Making for Vendor Selection With AHP and Random Disposal of DEA

The vendor selection directly relatives to the procurement quality and influences the competition of the corporation in the supply chains. It is important and practical to study the vendor selection method. The measuring criteria and the method for vendor selection are analyzed. The authors put forward an new method which is combined with both the advantage of analytic hierarchy process (AHP ) and random disposal of data envelopment analysis ( DEA) for vendor selection. It introduces a random variable which solves the disadvantage of the weigh value in DEA which convert subjective estimation to objective opinion in the course of the vendor selecting. The method can improve the reliability of the vendor selection.