砂光机导向辊动态性能的临界转速计算与分析

通过对砂光机导向辊动态性能的临界转速分别进行传统计算和有限元分析验证,分析两者之间的差别以及产生误差的原因,从而对导向辊的设计及合理使用提供理论依据。     

青核桃去皮过程的受力分析

青核桃在去皮方面不断进取的同时,存在着共同的问题是去掉的青皮被打成泥状,对核桃和环境都造成再次污染。为此,将通过模拟青核桃去皮过程的受力进行试验,分别从青核桃的尺寸、加载方向及加载速度等可能影响青核桃去皮过程的因素进行分析研究,为使青皮脱掉后不会被打成泥状,而是呈块状脱出奠定实验基础。     

Being exposed to low concentrations of pirimiphos-methyl and chlorfenapyr has detrimental effects on the mobility of Trogoderma granarium

BACKGROUND

Sublethal effects of insecticides may negatively affect several biological and behavioral traits of insects. The lethal effects of pirimiphos-methyl and chlorfenapyr have been previously showed on Trogoderma granarium, but little knowledge is available about their sublethal effects at low concentrations on both sexes. Herein, the sublethal effects of pirimiphos-methyl and chlorfenapyr on the mobility of T. granarium males and females were investigated.

RESULTS

Lethal concentration (LC) values of pirimiphos-methyl and chlorfenapyr were lower for T. granarium females than males. LC values on males were LC₁₀ = 0.000788 and 0.00139 mg active ingredient (a.i.) cm⁻², LC₃₀ = 0.00350 and 0.00535 mg a.i. cm⁻², and LC₅₀ = 0.00986 and 0.0136 mg a.i. cm⁻² for pirimiphos-methyl and chlorfenapyr respectively. LC on females were LC₁₀ = 0.000704 and 0.00110 mg a.i. cm⁻², LC₃₀ = 0.00323 and 0.00428 mg a.i. cm⁻², and LC₅₀ = 0.00925 and 0.0110 mg a.i. cm⁻² for pirimiphos-methyl and chlorfenapyr respectively. The walking duration of beetles exposed to LC₃₀ of pirimiphos-methyl was significantly lower than the individuals exposed to LC₁₀ and LC₃₀ of both insecticides and control ones. Pirimiphos-methyl LC₃₀-exposed males remained more time on their back (101.7 s) than females (46.9 s), while the latter stayed immobile longer than males (381.7 s versus 371.9 s). The highest speed was recorded for control beetles (14.17 mm s⁻¹ females vs. 12.44 mm s⁻¹ males), while the lowest speed was observed in pirimiphos-methyl LC₃₀-treated males (8.36 mm s⁻¹) and females (9.66 mm s⁻¹).

CONCLUSIONS

Overall, males and females exposed to low concentrations of pirimiphos-methyl and chlorfenapyr showed reduced motility. This knowledge can be exploited further to unlock behavioral effects of insecticides for effective pest management programs in warehouses. © 2023 Society of Chemical Industry.     

突发性环境污染事故应急监测的速度保障

针对突发性环境事故如何保证应急监测速度的问题，从应急监测前准备工作及应急监测运行期两方面进行说明，为保障应急监测速度提供了切实可行的方法和步骤。     

Reference Efficiency of Planetary Gear Train

Reference efficiency of a pair of gear drive without planetary motion is the base to calculate efficiency of the whole planetary gear train. The authors find reference efficiency for speed increase is higher than that of the same drive used for speed reduction. This is different from the earlier viewpoint. New equations are derived for correctly calculating the reference efficiency of spur gear and helical gear with internal conjugate and external conjugate either in the state of speed increase or speed reduction respectively. The equations are also used to calculate efficiency of 2K-H planetary gear train.     

可视化编程技术在发动机外特性曲线绘制中的应用

通过对汽车发动机外特性的理论分析,在处理汽车发动机外特性曲线时,建立了一种适合处理发动机外特性曲线的三次样条函数拟合的数学模型,在C Builder可视化开发平台上,编制了汽车发动机外特性曲线绘制程序.利用三次样条函数插值法对实验数据进行拟合,实现了发动机外特性曲线绘制的自动化.     

轧花机变频调速参数自调整模糊控制系统

通过对ＭＹ－１２１轧花机的内部结构及工作原理的研究，指出现行籽棉物流控制系统的不足，研制了模糊智能变频调速系统，控制方案已在计算机上实现，并用于棉厂实时控制，该模糊控制系统运行结果是令人鼓舞，极大地改善了控制精度，稳定了扎花生产。     

联合收获机前进速度模糊控制系统多目标遗传优化

针对联合收获机前进速度模糊控制系统参数设计具有主观性,导致作业性能不理想的问题,以切纵流联合收获机样机为研究对象,构建联合收获机前进速度模糊控制系统仿真模型,并建立控制性能和收获性能的优化目标函数来衡量联合收获机的作业性能,利用多目标遗传算法对模糊控制系统的隶属函数和输送槽、割台螺旋输送器和切流滚筒对前进速度的影响因子进行优化。通过对优化前后模型仿真对比和两组田间试验数据分析,表明优化后的控制系统在受外界干扰情况下控制性能得到了较好的保持,收获性能在喂入量变化不大情况下,单位平均损失率分别由1.45%和1.26%降至1.12%和1.14%,联合收获机的总体作业性能得到改善。     

柴油机瞬时转速测量误差分析研究

通过分析柴油机飞轮瞬时转速的测量误差,指出角度误差是飞轮瞬时转速的主要误差来源,从而提出了减少误差的方法,提高了瞬时转速的测量精度。     

低比转数离心泵叶轮出口紊流流动结构分析

在叶轮内三维紊流流动数值计算的基础上，从介质能量的观点，分析了不同工况下低比转数离心泵叶轮出口处的紊流流动结构。数值计算采用SIMPLEC算法，在贴体坐标系下求解Navier—Stokes方程，紊流模型采用标准的κ—ε模型。计算结果表明，在叶轮的出口附近靠近吸力面一侧存在一个低能区，而压力面一侧能量相对较高。这与有关文献中所指出的离心风机的“射流—尾流”结构相对应。当偏离设计工况时，该低能区的范围和强度略有增加，相对应的叶轮效率也降低。计算结果与水泵在这些工况下的效率实验结果相一致，说明低能区的存在是影响低比转数离心泵效率的重要因素。