Effects of planting density on the productivity and water use of tea (Camellia sinensis L.) clones: I. Measurement of water use in young tea using sap flow meters with a stem heat balance method

Sap flow meters based on the stem heat balance method were used to measure the mass flow rates or water use in young potted tea (Camellia sinensis L.) plants of clones AHP S15/10 and BBK35. The meters were constructed on site and installed onto the stem or branch sections of field growing plants in an experiment originally designed to study the effects of plant population density and drought on the productivity and water use of young tea clones. The objective of the study was to use the SHB method as a first attempt to use sap flow meters for determining the water use of young tea growing in the field under well watered conditions in Tanzania. The results are reported and recommendation made for further work on using the technique.     

进气道布置对两气门柴油机进气门口空气运动的影响

在稳流模拟试验台上，利用研制的柴油机试验缸盖、气门口三维流速测量装置，用热线风速仪测量了不同进气道布置方案下的进气门口三维流场，分析了进气门口三维流场产生的缸内空气动量矩流率，揭示了进气道的布置对柴油机进气门口空气运动影响的变化规律。进气道布置角度的变化对柴油机气门口流场及动量矩流率产生很大影响。各速度的大小和切向速度分布曲线发生较大变化，并随升程的增大而更加明显；对螺旋气道的动量矩流率影响较大，随升程的增加影响增大；对切向气道的动量矩流率影响更为明显，随着升程的增加影响减小。     

秸秆揉切机用刀片磨损的研究

对9RZ-60型揉切机用刀片进行了磨损试验,探讨了刀片材料、作业对象、装机位置和刃口形式对刀片磨损的影响,对65Mn、T10和Crl2MoV三种材料的刀片磨损表面形貌进行了微观分析,指出加工羊草时,刀片材料为主要影响因素,加工玉米秸和豆秸时,刃口形式为主要影响因素。刀片加工秸秆的磨损形式是以抛光磨损为主,辅之以硬杂质造成的磨料磨损。     

Effect of water deficit in different growth stages on stem sap flux of greenhouse grown pear-jujube tree

The effects of water deficit in different fruit growth stages on the variation of stem sap flux of 6-year old greenhouse-grown pear-jujube trees were investigated. Treatments included sufficient water supply during the whole fruit-growing period (T₁), mild water deficit during the flowering–fruit setting stage (T₂), moderate water deficit during the fruit rapid growth stage (T₃) and severe water deficit during the fruit maturing stage (T₄). Results showed that significant compensation effect on stem sap flux after re-watering was observed in T₂, but not in T₃ and T₄ stages. At the end of rapid growth stage, the diurnal variation of stomatal conductance generally had a similar trend as that of stem sap flux, but with a distinct midday depression from 12:00 to 14:00 p.m. In addition, a linear relationship between the relative available soil water content (RAWC) and the ratio of daily stem sap flux to that of sufficient water treatment was observed (R² = 0.4489).     

热泵式节能烘干机的设计

热泵是一种使热量从低温介质流向高温介质,以对高温物体进行供热的装置.为此,利用热泵原理研究设计了一种小型高效节能烘干机,并介绍了该机的主要特点、总体结构等,尤其对热泵、烘干床进行了详细介绍.该机具有结构简单新颖、造价低廉、使用寿命长、高效节能等优点,不仅可以烘干多种农产品,还可以烘干茶叶、蘑菇等多种农副产品.     

滚珠丝杠的温升及热变形对策

对滚珠丝杠的温升及热变形的对策进行了探讨,提出解决温升和热变形的方法,为滚珠丝杠的设计、安装、使用和维修提供参考.     

滚珠丝杠的温升及热变形对策

对滚珠丝杠的温升及热变形的对策进行了探讨，提出解决温升和热变形的方法，为滚珠丝杠的设计、安装、使用和维修提供参考。     

旱区覆膜滴灌棉田N 2 O排放对化肥减量有机替代的响应

覆膜滴灌条件下,采用静态箱-气相色谱法研究了不同施肥策略:CK(不施肥)、CF(N 300 kg/hm~2;P2O590 kg/hm~2;K2O 60 kg/hm~2)、60%CF+OF(普通有机肥6 000 kg/hm~2)、60%CF+BF(生物有机肥6 000 kg/hm~2)对棉田土壤N_2O排放的影响,旨在明确滴灌棉田连续不同施肥策略下土壤N_2O的排放特征。结果表明,棉花生育期N_2O排放通量表现为施肥处理大于不施肥处理,滴灌施肥后第3/4天N_2O排放通量顺序为CF60%CF+OF60%CF+BFCK,而滴灌后第7/8天N_2O排放通量则表现为有机肥处理高于化肥处理,滴灌施肥结束后表现与之相同;生育期的N_2O排放总量以100%化肥处理(CF)最高,与其相比,60%CF+OF和60%CF+BF处理分别降低3.75%和8.37%,N_2O排放系数则分别降低1.39%和73.8%;相关及通径分析均表明,与土壤NH+4-N相比,NO-3-N与N_2O排放的关系更密切。     

退火对304不锈钢拉伸坯料力学性能的影响

研究了不同退火处理工艺对304不锈钢板材拉伸坯料的硬度、抗拉强度和延伸率等力学性能的影响，为拉伸坯料获得较高的可加工性能提供了参考数据。     

螺旋弯管内流动与传热特性的数值模拟

针对螺旋弯管内的流动与传热特性,以螺旋弯管传热试验中试验件模型为研究对象,基于Realizable k-ε湍流模型、第一类热边界条件下的薄壁热阻模型,对不同进口来流条件下,采用Fluent对螺旋弯管内水的流动与换热进行数值模拟.计算得到了螺旋弯管内速度场与温度场的分布,通过数值模拟结果与试验结果的比较,验证了数值模拟方法的正确性.结果表明:随着进口来流雷诺数的增大,螺旋弯管内的二次流迪恩涡核心向弯管管壁扩张;在螺旋弯管小曲率比、来流雷诺数2 280~6 000内,螺旋弯管的强化换热综合性能最佳;对模拟结果数据利用多元线性回归法,推导出螺旋弯管内换热努赛尔数、进出口压力降的准则关系式.研究结果可为螺旋管式换热器设计与优化提供一定的参考依据.