基于Matlab/Simulink的伺服系统仿真

在Matlab/Simulink环境下,设计和组合了交流同步伺服电机、dq坐标系向abc坐标系转换、三相电源逆变器、位置调节器、速度调节器和电流调节器各模块,并在此基础上构建了交流同步伺服系统的位置、速度和电流3闭环仿真模型。仿真结果证明了该控制方法的有效性,为交流同步伺服系统的设计提供了理论依据。     

长江中下游地区Venlo型温室空气温湿度以及黄瓜蒸腾速率模拟研究

根据温室能量和质量平衡的物理学原理,建立了一个以温室外气候条件(太阳辐射、温度、湿度、风速等)为驱动变量,以温室结构、温室覆盖材料、温室内作物(高度、叶面积指数)为参数的温室小气候模拟模型,并利用上海Venlo型温室的三季试验数据对模型进行了检验。结果表明：模型能较好地预测中国长江中下游地区Venlo型温室内夏季和冬季空气温度、湿度以及作物蒸腾速率。模型对该地区夏干季节(2001年8月,三伏天)、夏湿季节(2002年6月下旬至7月中旬,梅雨季节)和冬季(2002年1月27日~2月5日)温室内空气温度、湿度以及作物蒸腾速率预测值与实际观测值的决定系数(R²)和标准误(SE)分别为：0.89,0.75,0.52;1.1℃,4.4%,0.040 g·m^-2·s^-1;0.80,0.84,0.77;1.5℃,4.4%,0.018 g·m^-2·s^-1;0.84,0.59,0.73;1.6℃,6.0%,0.012 g·m^-2·s^-1。该研究为进一步探讨温室环境的优化调控提供了理论依据和决策支持。     

Simulating the cumulative effects of multiple forest management strategies on landscape measures of forest sustainability

While the cumulative effects of the actions of multiple owners have long been recognized as critically relevant to efforts to maintain sustainable forests at the landscape scale, few studies have addressed these effects. We used the HARVEST timber harvest simulator to predict the cumulative effects of four owner groups (two paper companies, a state forest and non-industrial private owners) with different management objectives on landscape pattern in an upper Michigan landscape managed primarily for timber production. We quantified trends in landscape pattern metrics that were linked to Montreal Process indicators of forest sustainability, and used a simple wildlife habitat model to project habitat trends. Our results showed that most trends were considered favorable for forest sustainability, but that some were not. The proportion of all age classes and some forest types moved closer to presettlement conditions. The trend for the size of uneven-aged patches was essentially flat while the average size of patches of the oldest and youngest age classes increased and the size of patches of the remaining age classes decreased. Forest fragmentation generally declined, but edge density of age classes increased. Late seral forest habitat increased while early successional habitat declined. The owners use different management systems that cumulatively produce a diversity of habitats. Our approach provides a tool to evaluate such cumulative effects on other landscapes owned by multiple owners. The approach holds promise for helping landowner groups develop and evaluate cooperative strategies to improve landscape patterns for forest sustainability.     

虚拟实验在水产动物生理学中的应用

水产动物生理学虚拟实验采取人机交互方式实施实验,已用于课堂实验教学,在提高动物生理学实验教学效果、增强学生学习兴趣、培养学生理论联系实际的能力等方面取得了显著效果。     

层状粘性土壤水分动态新模型的应用

根据Ｍｏｌｄｒｕｐ等提出的运动平均斜率模型,对重粘土,轻粘土,粉质粘土和壤土及前３种粘性土壤所松成的层状介质中的水分,在入渗条件下的运动进行了数值模拟。     

蜗壳断面形状及叶轮位置对蜗壳式轴流泵性能的影响

根据速度系数法设计了1种对称的“马蹄形”断面蜗壳和2种非对称的 “圆形”断面蜗壳与相同的轴流泵叶轮组合,并基于标准k-ε模型封闭的雷诺平均方程,应用 ANSYS CFX 14.5 软件,对设计的3个蜗壳式轴流泵内部的三维流动开展数值模拟.当采用“马蹄形”蜗壳时,设计流量点的扬程和效率最低,蜗壳内部压力分布不如非对称的圆形断面蜗壳均匀.选择水力效率相对较高的蜗壳,将4种轴向位置不同的叶轮与该蜗壳组合,并进行三维流动数值模拟,结果表明:叶轮出口与蜗壳进口中间平面距离40 mm时,轴流泵效率最高,叶轮出口与蜗壳进口中间平面距离80 mm时,轴流泵效率最低.此时,过流段和蜗壳内有明显回流和旋涡.轴流式叶轮与蜗壳的相对位置对蜗壳轴流泵的扬程-流量曲线和效率-流量曲线都有明显的影响.     

甘蔗切割器螺旋提升机构输送性能分析与改进

为改善甘蔗收割机物流系统的堵塞问题,以切割器螺旋提升机构为主要研究对象,通过仿真模拟分析与试验研究手段,探讨了摩擦系数等因素对甘蔗物流堵塞的影响,通过UG和ADAMS建立虚拟样机仿真模型,仿真结果表明,增大螺旋的摩擦系数可以提高甘蔗的输送速度,减少甘蔗平均滞留时间。高速摄影试验表明,螺旋选用摩擦系数大的轮胎胶作为覆盖层时、当切割器转速在750 r/min左右时,甘蔗的滞留时间较原钢筋螺旋缩短了17%左右,可以改进切割器物流系统堵塞问题。基于上述机理,设计了平面螺旋结构,其与甘蔗的接触方式由原来的点接触变为线接触,仿真分析表明,面宽为20 mm的螺旋与原圆柱型螺旋相比,甘蔗滞留时间缩短了32%,说明平面螺旋可以有效地抑制前端输送系统的堵塞现象;适当加宽螺旋提升机构的面宽有利于减少甘蔗滞留时间,单位时间内甘蔗输送更快、更稳定。该研究为后续试验研究及物理样机的改进设计提供了参考。     

水泵水轮机不同导叶开口的驼峰特性

为研究水泵水轮机在不同导叶开口下的驼峰特性,对某一电站水泵水轮机模型水泵工况进行试验,得到不同导叶开口下的驼峰特性曲线,结果表明随着活动导叶开口减小,在低负荷区水泵工况扬程越高,扬程趋势越陡,同时驼峰现象更明显,但是驼峰区域变小.在试验研究的基础上,对该模型进行三维实体建模,并进行网格划分,采用SST k-ω模型、标准k-ω模型、RNG k-ε 模型和标准k-ε模型分别对19 mm活动导叶开口下各个工况点进行数值模拟,最终确定SST k-ω湍流模型能够较好地符合试验结果.分别选取13,19,25 mm活动导叶开口进行数值模拟,得到水泵工况的扬程、力矩和效率与流量的关系曲线,与试验结果对比,其变化趋势一致.针对19 mm活动导叶开口低负荷工况点、驼峰区工况点、最优工况点和超负荷工况点进行流动特性对比分析,表明驼峰特性与转轮流道内和固定导叶部分流道内的流动分离及旋涡有关.     

蓄水坑灌单坑土壤氮素迁移转化的数值模拟

为了提高蓄水坑灌条件下土壤氮素的利用率,建立了蓄水单坑土壤氮素迁移转化的数学模型,利用有限体积法进行了求解,并利用室内蓄水单坑灌施尿素条件下土壤水分和氮素运移转化实测数据进行了验证。结果表明,蓄水单坑灌施尿素1 700 mg/L条件下,土壤铵态氮主要分布在20～70 cm深度范围内,1～3 d内土壤铵态氮含量明显增大,7 d后开始减小;土壤硝态氮主要分布在湿润锋附近,1～7 d内硝化作用逐渐增强,20～70 cm范围内硝态氮浓度不断增大。土壤含水率、湿润锋、铵态氮、硝态氮含量计算值与实测值吻合较好,说明所建立的蓄水单坑土壤氮素迁移转化的数学模型是正确的,采用有限体积法求解是可行的。该模型可较好地模拟蓄水坑灌单坑土壤氮素迁移转化的动态变化。     

Effect of Aquasorb and Organic Compost Amendments on Soil Water Retention and Evaporation with Different Evaporation Potentials and Soil Textures

Abstract

Aquasorb PR3005A, a hydrophilic polymer (a salt copolymer polyacrylamide), and garden waste compost were added to a loamy sand and a loam soil in pots to assess their impact upon soil physical properties at two different evaporation potentials. Compost was mulched and incorporated, the Aquasorb was incorporated, and their effect on temperature and amelioration of soil water content and evaporation was investigated. Mulching with compost reduced evaporation and increased soil temperature. Maize (Zea mays var. single cross 704) was sown in the same pots later, and growth indicator factors (plant height, fresh and dry weight, root weight, and leaf area) were compared. It was concluded that compost mulch application is beneficial to soil water retention whereas compost incorporation did not show these benefits. Compost mulch advances seedling emergence and enhances early growth through hydrologic soil amelioration. High rates of Aquasorb were also beneficial in advancing the emergence and early growth of maize seeded in loamy sand. The hydration capacity of Aquasorb is reduced as the electrolyte concentration and electrical conductivity are increased. Increased electrolyte concentration in soil solution, through drying, may result in gel dehydration and water release at potentials greater than field capacity, which may be lost to drainage. Furthermore, it is concluded that pot experiments with amendments fail to simulate field conditions.