Artificial Neural Networks Models for Flow Stress during High Temperature Plastic Deformation of Al-Li Alloy

Using gained experimental data to develop the models of stable flow stresses at high temperature plastic deformation by statistical methods for alloy materials, precision of the models is poor and at the same time the processes of modeling are complicated with great workload. On the basis of the data obtained on Gleeble-1500 Thermal Simulator,the predicting models for the relation between stable flow stress during high temperature plastic deformation and deformation strain, strain rate and temperature for 1420 Al-Li alloy have been developed with BP Artificial Neural Network method. The results show that the model on basis of BPNN is practical and it reflects the real feature of the deforming process. It states that the difference between the real value and the output of the model is in order of 5 percent.     

Numerical Simulation of Flow field and Temperature field in Combustion Chamber Widened Suddenly

The flowfield and temperature field are numerically Simulated by the mathematical model of the fluid flow and heat transfer in circular combustion chamber widened suddenly. The distributions and influence factors of the flow field and temperature field are studied in it. The results have the guiding significance for the design of combustion chamber. The mathematical models can serve as the quantitative analysis methods for design.     

EFFECT OF MICRO-GALLIUM ON THE INTERGRANULAR SEGREGATINN OF PHOSPHORUS IN CARBON STEELS

The effect of small amounts of gallium on the intergranular segregation of phosphorus in carbon steels is discussed, with the help of the impact test, fracture morphology and micro-structure analyses, combined with composition analysis on the fracture surfaces by Auger electronspectrometer. The results show that gallium in the steel with a content of gallium more than ten thou-sandth can suppress, to some extent, the intergranular segregation of phosphorus and retard the tempering process. As a result, the temper embrittlement of the steel disappears and the embrittlement transition temperature declines.     

以粮温实测数据为例探讨低温储粮的可行性

通过对高大平房仓粮温进行跟踪检测，分析比较了粮温变化情况，并探讨了低温储粮的可行性。     

基于模糊逻辑控制的温室温度控制技术的研究

目前对温室环境控制很难建立一个精确的数学模型，而且温室需要控制的环境因子有很多，采用传统的控制方法很难达到理想的控制效果。本文介绍了以温度作为优先控制的环境因子，采用模糊逻辑控制方法，对温室温度进行调控。     

Remote sensing of biotic and abiotic stress for irrigation management of cotton

The applicability of commercially available remote sensing instrumentation was evaluated for site-specific management of abiotic and biotic stress on cotton (Gossypium hirsutum L.) grown under a center pivot low energy precision application (LEPA) irrigation system. This study was conducted in a field where three irrigation regimes (100%, 75%, and 50% ET_c) were imposed on areas of Phymatotrichum (root rot) with the specific objectives to (1) examine commercial remote sensing instrumentation for locating areas showing biotic and abiotic stress symptomology in a cotton field, (2) compare data obtained from commercial aerial infrared photography to that collected by infrared transducers (IRTs) mounted on a center pivot, (3) evaluate canopy temperature changes between irrigation regimes and their relationship to lint yield with IRTs and/or IR photography, and (4) explore the use of deficit irrigation and the use of crop coefficients for irrigation scheduling. Pivot-mounted IRTs and an IR camera were able to differentiate water stress among irrigation regimes. The IR camera distinguished between biotic (root rot) and abiotic (drought) stress with the assistance of groundtruthing. The 50% ET_c regime had significantly higher canopy temperatures than the other two regimes, which was reflected in significantly lower lint yields when compared to the 75% and 100% ET_c regimes. Deficit irrigation down to 75% ET_c had no impact on lint yield, indicating that water savings were possible without reducing yield.     

滚珠丝杠的温升及热变形对策

对滚珠丝杠的温升及热变形的对策进行了探讨，提出解决温升和热变形的方法，为滚珠丝杠的设计、安装、使用和维修提供参考。     

寒带无人值守机房冬季节能及补热方式

黑龙江冬季寒冷且时间长，各无人值守机房在冬季将消耗大量电能来取暖。由于无线移动基站很多，采取节能方式将降低运行成本。为此，介绍了一种节能和补偿热量方式，其实际应用效果显著。     

温度对不同育成地水稻品种的生长及其物质生产的影响

以原产温带的日本晴三粳稻品种和原产热带的IR8两籼稻品种为材料,观察了16—30℃恒温对其生长和物质生产的影响。结果:在试验温度范围内,各个品种的植株均随温度升高而增高;但两类品种的株高感温指数有差异,IR8两品种的较低,日本晴三品种的较高。IR8两品种在30℃下分蘖数最大,日本晴三品种则是在25℃下,较有利于它们的分蘖。IR8两品种的CGR和NAR,以30℃下最大,日本晴三品种则以25℃下的最大,干物质生产量亦呈此趋势。所有供试品种都是在25℃下出叶最少,出叶间隔天数则以在20℃下为最快。