Soybean yield and yield components as influenced by the single and repeated flaming

Field experiments were conducted to study the impact of single and multiple flaming on crop injury, yield components, and yield of soybean. The goal of this experiment was to determine the number of the maximum flaming treatments which soybean could tolerate without any yield loss. The treatments consisted of a non-flamed control, and broadcast flaming conducted one time (at VC-unfolded cotyledon, V2-second trifoliate, and V5-fifth trifoliate), two times (each at VC and V2, VC and V5, and V2 and V5 stages), and three times (at VC, V2, and V5 stages) resulting in a total of eight treatments. All plots were kept weed-free for the entire growing season by hand hoeing. A propane dose of 50 kg ha⁻¹ was applied with torches parallel to the crop row and at an operating speed of 4.8 km h⁻¹ for all treatments. The response of soybean was measured as visual injury ratings (at 7 and 28 days after treatment – DAT) as well as effects on yield components and yield. Broadcast flaming conducted once (at VC or V5 stage), as well as twice (at VC and V5 stages) exhibited the lowest injury of about 8% at 28 DAT. Any treatment that contained flaming at V2 stage resulted in more than 70% injury at 28 DAT. The highest crop yields were obtained from the non-flamed control (3.45 t ha⁻¹) and the plots flamed once at VC (3.35 t ha⁻¹), V5 (3.32 t ha⁻¹), and two times at VC and V5 (3.24 t ha⁻¹), which were all statistically similar. Soybean flamed at V2 stage had lower yields (1.03 t ha⁻¹ at V2, 0.46 t ha⁻¹ at VC and V2, and 0.38 t ha⁻¹ at V2 and V5). The lowest yields were in soybean flamed three times (VC, V2, and V5 stages), which yielded only 0.36 t ha⁻¹. These results indicate that soybean could tolerate a maximum of two flaming treatments at VC and V5 growth stages per season without any yield reduction.     

培肥措施对旱地农田土壤CO2排放和碳库管理指数的影响

阐明长期有机物料施肥下土壤CO₂排放特征及其影响机制以及碳库管理指数对黄土高原旱作农业区固碳减排及施肥模式选择的影响尤为重要。基于2012年设置在陇中黄土高原旱作区的长期定位试验,通过不施肥（CK）、氮肥（NF）、有机肥（OM）、秸秆（ST）、有机肥结合无机肥（OMNF）5个处理,测定并计算了2018年不同施肥措施下全年土壤CO₂排放、作物碳排放效率和碳库管理指数的变化,并运用结构方程模型分析了0~30 cm土壤温度、水分、微生物量碳氮、易氧化有机碳、蔗糖酶、脲酶与土壤CO₂排放速率的关系。结果表明：1）与不施肥相比,秸秆、有机结合无机肥和有机肥处理使生育期土壤CO₂排放平均速率提高了42.72%、30.82%和29.79%,秸秆、有机肥处理分别使生育期土壤CO₂排放量显著提高36.35%、32.45%（P<0.05）,有机结合无机肥处理使碳排放效率显著降低41.10%（P<0.05）;2）有机物料处理均能显著提高0~5 cm土层易氧化有机碳、微生物量碳氮、蔗糖酶活性和碳库管理指数,相比不施肥和氮肥处理,有机结合无机肥处理分别使0~30 cm土壤碳库管理指数提高127.41%,99.33%（P<0.05）;3）结构方程模型表明,环境因子对土壤CO₂排放速率的总解释度为53%,对土壤CO₂排放速率总效应较大的影响因素包括土壤温度（2.36）、微生物量碳（1.59）和土壤水分（1.18）,且均间接地影响着土壤CO₂排放速率,土壤温度促进了微生物量碳和蔗糖酶活性的提高,微生物量碳促进了微生物量氮和易氧化有机碳的增加。综合来看,有机结合无机肥处理可以提升土壤碳库管理指数,保持微生物活性,增加作物产量,降低土壤碳排放效率,是陇中黄土高原旱作农业区比较适宜的农田培肥措施。     

平原丘陵地区水土资源联合优化配置

通过对区域水资源和土地资源概况进行研究,利用大系统递阶优化思想,以供水对象相对缺水率最小和农业经济效益最大为目标,建立了区域水土资源联合优化配置模型,并以句容市为例,对平原丘陵地区的水资源在时间和区域上进行了合理安排、设计、组合和布局,对农业种植结构进行了调整。研究结果表明:水资源是土地资源发挥最大优势的基本条件,水资源利用合理与否,直接影响到土地资源的生产效率;而土地资源的利用程度也影响着水资源的变化,土地资源利用效率高,则为水资源的合理开发利用创造条件。     

基于HHT变换的PSO-LSSVM耦合模型估算气象资料短缺地区ET_0

为准确估算气象资料短缺地区参考作物腾发量,构建了一种基于HHT变换的PSO-LSSVM耦合模型,并利用新疆和田气象站2000—2009年单日数据做训练、双日数据做验证。结果表明,该模型估算ET0方法明显优于常规的PSO-LSSVM和GRNN,预测精度较二者分别提高了15.7%~85.6%和15.8%~93.7%;该方法预测ET0的气象要素重要性为RsTmaxTminRHWn,利用该方法对气象要素组合为Tmax/Tmin/RH/Wn、Tmax/RH/Wn、Tmin/Wn、Wn条件下的ET0预测,MSE分别为0.407、0.185、0.149、0.135,说明该方法可以很好地估算资料缺失地区ET0。     

基于Z比分数的参考作物腾发量计算方法优选

参考作物腾发量(ET0)是计算作物需水量的关键,是进行农田水分管理和灌溉预报的主要参数。但不同ET0计算方法的结果存在明显差异。用能力统计量Z比分数,对FAO56Penman-Monteith、Hargreaves-Samani、Irmark-Allen拟合和Priestley-Taylor四种常用ET0计算方法在不同天气条件下的计算结果精度进行了对比分析。结果表明,Priestley-Taylor与FAO56Penman-Monteith方法的计算结果在精度上具有较高的一致性,与有关文献结果相吻合,其中前者精度略佳。且Z比分数参数受极端值的影响较小,计算简便、适用性强,克服了常规方法公式繁杂、编程实现困难的缺点,说明Z比分数法能够更好地适用于ET0计算方法的优选。研究结果可为农业水土工程领域有关参数计算与测定方法的优选提供借鉴。     

四种替代药剂对梨火疫病菌的抑制活性及其田间防效

为筛选农用链霉素替代药剂,以其为对照药剂,测定春雷霉素、中生菌素、噻霉酮和噻菌铜这4种常用细菌病害防治药剂对梨火疫病菌Erwinia amylovora的抑制活性、对梨火疫病的田间防效及不同药剂处理后梨中的农药残留,并对这4种药剂的作物安全性进行评价。结果表明,中生菌素、噻霉酮和春雷霉素对梨火疫病菌有抑制作用,抑制中浓度EC50分别为1.60、6.64和60.57 mg/L,中生菌素的抑制效果高于链霉素。在连续2年田间试验中,中生菌素1 000倍液和春雷霉素400倍液对梨火疫病的保护效果和治疗效果均达90.33%以上,噻霉酮500倍液和噻菌铜200倍液对梨火疫病的保护效果均达100.00%,治疗效果均超过86.97%,与对照药剂农用链霉素2 000倍液的效果相当。所有药剂处理后均未检出中生菌素、春雷霉素、高效氯氰菊酯和农用链霉素的农药残留,而噻虫嗪、阿维菌素和矮壮素虽有检出,但其残留量均低于国家限量标准。花期前后、幼果期和果实膨大期施药,中生菌素、春雷霉素、噻霉酮和噻菌铜对梨花、叶片、枝梢及果实生长均无不良影响。综合来看,中生菌素、春雷霉素、噻霉酮和噻菌铜均可作为农用链霉素的替代药剂,...     

Evaluation of the pattern of spray released from a moving multicopter

BACKGROUND

Multicopters are used for releasing particulates seeds, fertilizer and spray. Their low cost and high manoeuvrability make them attractive for spraying in steep terrain and areas where overspray is undesirable. This article describes a model of multicopter wake and its influence on particulate dispersion, which is computationally economical compared to many computational fluid dynamics (CFD) approaches, yet retains reasonable accuracy.

RESULTS

A model was successfully implemented in OpenFOAM . It features source terms for the rotor wash, Lagrangian particle tracking, an evaporation model, and a porous medium approach to model the effect of the ground vegetation. Predictions were validated against the field tests of Richardson et al. which used a DJI Agras MG-1 multicopter in three different flights with airspeeds of 3.2–4.9 m s⁻¹, ground speeds of 2.1–2.9 m s⁻¹ and cross-wind speeds of 0.04–2.2 m s⁻¹. The effective swath width (30% line separation) was predicted to within one standard deviation. Sensitivity to a rotor rotational speed, flight height, flight velocity, multicopter roll and yaw angles, surface roughness length, plant height and leaf density was checked.

CONCLUSION

In all flight trials, the modelled swath was closest to the experimentally obtained swath when the surface roughness of the fetch was equal to 0.5 m (bushes) and the rotational speed of all rotors was equal to 2475 rpm with 0.75R (0.2 m) tall plant canopy (grass) introduced to the model. The model showed acceptable validity for flight velocities of ≤2.8–5 m s⁻¹ when flight parameters can be approximately estimated. © 2022 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.     

Application and mechanisms of metal-based nanoparticles in the control of bacterial and fungal crop diseases

Nanotechnology is a young branch of the discipline generated by nanomaterials. Its development has greatly contributed to technological progress and product innovation in the field of agriculture. The antimicrobial properties of nanoparticles (NPs) can be used to develop nanopesticides for plant protection. Plant diseases caused by bacterial and fungal infestations are the main types of crop diseases. Once infected, they will seriously threaten crop growth, reduce yield and quality, and affect food safety, posing a health risk to humans. We reviewed the application of metal-based nanoparticles in inhibiting plant pathogenic bacteria and fungi, and discuss the antibacterial mechanisms of metal-based nanoparticles from two aspects: the direct interaction between nanoparticles and pathogens, and the indirect effects of inducing plant resilience to disease. © 2022 Society of Chemical Industry.     

Challenges and opportunities of unmanned aerial vehicles as a new tool for crop pest control

The application of pesticides is not simply delivering chemicals to the target area. It also involves considering the negative aspects and developing strategies to deal with them during the application process, to ensure the maximization of pesticides use efficiency and the maintenance of the ecosystem. Unmanned aerial vehicle (UAV) sprayers demonstrate unique advantages compared to traditional ground sprayers, particularly in terms of maneuverability and labor intensity reduction, showed great potential for chemical application in pest control. It is undeniable that there exist challenges in the practice of UAV spraying, such as higher potential risks of pesticide drift or pathogen transmission, uncertainty canopy deposition for different crops, and unexpected leaf breakage induced by downwash flow. Maximizing the utilization of downwash flow while avoiding lateral air movement outside the intended target crop area is a major issue for chemical application with UAV sprayers, particularly in light of the increasingly apparent consensus on the need for enhanced environmental protection during the chemical application process. It must be considered that the operation strategy in different scenarios and for different crop targets is not the same, unique requirements should be given on nozzle atomization, flight parameters, adjuvants and aircraft types in specific working situations. In future, the implementation of spray drift prediction, technical procedures development, and other solutions aimed at reducing pesticide drift and improving deposition quality, is expected to promote the adoption of UAV sprayers by more farmers. © 2023 Society of Chemical Industry.