浅析特大型企业集团的内部市场化运作

以一拖集团公司管理体制的创新实践为背景,探讨了特大型国有企业实施内部市场化管理的必要性和可行性,并从经济学角度分析了内部市场化的作用机制、优势特点和运作风险。     

木工适张带锯条的振动分析

应用振动理论,对经过适张处理后的木工带锯条进行研究,确定张紧力与系统固有频率之间的关系,提出将带锯条的振动简化为弦的振动与受拉伸的梁振动.用电测法测应变换算张紧力,用频谱分析法测量系统的固有频率,理论解得到试验支持,同时计算张紧力和张紧应力.     

真空堆载联合预压法在某工程中的应用分析

本文通过对某工程孔隙水压力及水平位移资料的观测，分析了通过真空一堆载联合预压法加固软上地基，土颗粒所受侧压力、渗流力、抗剪力的变化，揭示了真空一堆载联合预压法在地基水平位移方面的相互作用．以及地下水位的变化对其加固效果的影响。     

Experimental study on the effect of horizontal waves on netting panels

The effect of horizontal waves on flexible netting panels is examined in this study, to evaluate the testing method of pretensioned mooring, radial systems, and flexible netting structures. The netting was suspended at a specific hanging ratio for six polyethylene panels with different characteristics. The aim was to evaluate the calculation method for horizontal wave forces on flexible netting panels. A regular wave was used in the experiment, with wave period 0.8–2.0 s and wave height 50–250 mm. The force on the netting structure was recorded by a tension transducer and digital signal recorder, and was simulated by a cubic spline in terms of the wave experiment under different wave conditions. The horizontal wave force on the netting panel changed periodically and asymmetrically, which was similar to the surface wave elevation. The horizontal wave force was related to the netting panel height and width (l), wave height (H) and wave length (L), twine diameter (d) and bar length (a) of the mesh. Using dual series relations, least-squares approximation, and multiple stepwise regression analysis, the following formula was obtained for the horizontal wave average apex value (F) on the netting panel: F=0.13ρgl(H/2)²(d/a)(H ^0.64 L ^0.77/0.9a ^0.44).     

Combined effect of wood moisture content,drill bit rotational speed and feed rate on drilling resistance measurements in Norway spruce (Picea abies (L.) Karst.)

ABSTRACT

An IML-RESI PD 400 drilling tool and a standard spade drill bit (IML System GmbH, Wiesloch, Germany) were used to study the combined effect of wood moisture content (MC), drill bit rotational speed and feed rate on drilling resistance (DR) and feeding force (FF). Tests were made with Norway spruce (Picea abies (L.) Karst.) conditioned in a normal climate (20°C/65% RH), at 20°C/95% RH, vacuum-pressure impregnated in water, and oven-dried. Rotational speeds and feed rates had an impact on feed rate per cutting edge for the major cutting edge of the drill bit which was used for correlation with DR and FF for various MC. Impact of MC on DR and FF depended on rotational speeds and feed rates of the drill bit. For feed rates per cutting edge less than 0.09?mm, DR was higher for water saturated (WS) specimens. Negligible differences between DR for various MC were found for feed rates per cutting edge between 0.09 and 0.15?mm. DR was higher at low MC for feed rates per cutting edge which were higher than 0.15?mm. FF extremely increased in conditioned (20°C/95% RH) and WS specimens at feed rates per cutting edge less than 0.1?mm.     

锯齿磨损变钝程度对木质材料切削力影响的研究

采用锯齿磨损变钝程度不同的硬质合金切削刀具对三种木材(杉木、樟子松、水曲柳)和两种人造板(中密度纤维板、刨花板)进行闭式切削实验,研究锯齿磨损变钝程度对木质材料切削力的影响规律。实验结果表明,随着刀具磨损变钝程度的增加,主切削力和法向力都呈增大趋势,且法向力的增幅更明显。负间隙C对中纤板主切削力、法向力以及刨花板法向力的影响曲线类似,均为先缓慢上升,再急剧增加,然后又趋于平缓;刨花板主切削力随负间隙C的增加而不断增加。     

玉溪市林分植被覆盖变化及驱动力分析

林分植被覆盖在很大程度上能够反映林分生态系统的健康与否,其时空变化是林分生态系统发展方向的判断依据。对玉溪市2010—2019年林分植被覆盖的时空格局变化进行了分析,并利用单因素和多元回归分析方法分别建立回归模型探索了林分植被覆盖改善与退化的驱动因素。结果表明:林分植被覆盖整体呈向好趋势,各驱动因素与斜率均不是简单线性关系;道路和居民区与林分植被覆盖改善速度呈负相关、与退化速度呈正相关;DEM、坡度、大型水体、公益林管护与林分植被覆盖改善速度呈正相关、与退化速度呈负相关;坡向与林分植被覆盖改善速度呈正相关,地形起伏度与林分植被覆盖退化速度呈负相关。林分植被覆盖改善与退化的驱动力不尽相同,影响机制也存在差异,这为更好制定生态保护相关政策提供了有力的科学依据。     

文峪河流域景观格局动态及其驱动力分析

以文峪河流域为研究对象,分析流域2000—2018年景观格局数量动态的面积、转移及速度特征.从斑块类型尺度与景观尺度2个层面选取景观指数分析流域近18年的景观格局动态,并在流域尺度上沿城市—林区梯度线分析沿线景观格局指数的梯度分布,基于数量统计模型对景观格局动态驱动力进行研究.结果表明,流域耕地、林地、草地面积有所减少...     

锈色粒肩天牛与寄主树种关系的初步研究

在连续 3a的定位观测和分析基础上 ,本文初步报道了锈色粒肩天牛与文献报道中的几种寄主树种之间的关系。结果如下 :(1)根据室内饲养下成虫对不同树种的取食及产卵情况和在不同树种上接种 (卵 )的幼虫情况 ,可将几种寄主树种分为 4类 :高感树种 (国槐 )、低感树种 (云实、黄檀 )、抗虫树种 (刺槐 )、免疫树种 (旱柳 ) ;(2 )酚酸类物质在旱柳中的含量 (3 0 3～ 9 73mg·(10 0g) - 1 ) ,显著高于其它树种中的含量 (1 71～5 39mg·(10 0g) - 1 ) ,可能是锈色粒肩天牛在旱柳上表现拒食、拒产卵、拒钻蛀的重要原因。氨基酸含量较高、组分相对最全 (17种 ) ,以及较高的C N值 ,是国槐基本营养物质的显著特征 ,这可能是锈色粒肩天牛嗜食国槐 ,对其造成严重危害的根本原因。锈色粒肩天牛很少取食危害刺槐 ,这与刺槐树种的各部分C N值过低 ,造成营养失调有关。黄檀木材纤维平均长度为 0 837mm ,平均宽度为 18 90 μm ,长宽比为 5 0 96 ,其韧性是参试树种中最大的 ,因而可能造成幼虫啃食困难 ,加上木材中的C N低 (0 36 ) ,因此 ,具有较强的抗虫性。云实树皮薄而光滑 ,造成成虫产卵困难 ,因此 ,在自然状态下 ,锈色粒肩天牛不易对其产生危害。     

A biomechanical analysis of industrial forest plantation workers in East Kalimantan

The objectives of this study are to clarify physiological work loads and physical loads acting on the lumbar region of workers and to propose a safe work environment in tropical forestry operations. The research was conducted in the industrial forest plantations of East Kalimantan, Indonesia, in 1996. In this study, heart rates and the physical lumbar burden of industrial forest plantation workers were measured for three types of work, that is, weeding, planting and path clearing. In addition, the load moment at the L₅/S₁ and the disc compression force were calculated using low-back biomechanical models. As a result, compression forces at the L₅/S₁ disc during weeding, planting and path clearing were estimated and found to be below the Action Limit (AL) by National Institute for Occupational Safety and Health (NIOSH). However, it was also found that some work posture types during path clearing by chain saw were sometimes above the AL. A part of this paper was orally presented at the 108th Annual Meeting of the Japanese Forestry Society (1997).