Effective working areas of the electro hydraulic power impulse

In order to ascertain the numbers of the electrodes (treatment for the sewage) and forecast the grain size property of the cracked mineral, based on the hypothesis of the equivalent effective volumes of one discharge of electro hydraulic power impulse technology, the formulas are worked out for computing the effective working areas of the two common working modes. The theoretic analysis and the results of the experiments of the treatment of bacillus coil liquid and crushing of quartz ceramic show that the results conform to the formulas relatively, and the precision of the calculated data has relations with the polluted degree of the sewage, the intensity, elasticity and dimension of the solid material, and the formulas for computing the effective working areas are feasible.     

Analysis of the distorted scaling factor in wind tunnel modeling of power transmission line system

Because of the limitation of the model making and the existing wind tunnel’s size, it is difficult to keep the line and tower in the same scaling factor in developing the aeroelastic model of the power transmission lines system, and a distorted scaling factor is needed in span length of the lines. With the instance of a 1 000 kV two circuit power transmission lines, the finite element analysis under the along wind load in time history is conducted with keeping the tower in the same and the line scaling factor being 1, 0.5 and 0.25 respectively. The results show that the response of the power transmission lines systems keep in the same, and then the wind induced vibration of the distorted model in the wind tunnel test can actually reflect the response of the power transmission lines system under the wind load.     

Analysis About the Coupling Circuit of the Communication With Low-voltage Power Line

In the interest of realizing carrier communication using LVPL, it is sticking point to analyse and design the coupling circuit of the communication. Higher efficiency of loading carrier signals is necessary. On the other hand, disturbs from LVPL should be overcome. Penman commendably resolved the difficult problem with the "complex-coupling-technology" of combining " electromagnetism - coupling" to "RC-coupling". Based on the " complex - coupling-technology" , "the interface circuit of the communication is analyzed and designed with LVPL. Simulation results and experimentation results show : the coupling circuit not only has higher efficiency of loading carrier signals but also can completely close off 50 Hz signal from LVPL. Therefore, the coupling circuit can apply to communication systems on LVPL.     

Power Frequency Electric Field Caused by EHV Lines and Its Effect

Mathematical model of power frequency electric field is established based on Charge Simulation Method(CSM) to analyze power frequency electric field caused by EHV lines with overhead ground wires and its effect, which are entering the megalopolis. Calculative method on the electric field under the transmission lines is analyzed and validated. According to the criterion of environmental evaluation, the distributing characteristic of electric field is summarized, in case of various arrangement manners of lines. At last, some advice and methods of eliminating electric field under the transmission lines entering the megalopolis is proposed with regard to protecting environment.     

The power-supply of X-ray machine adopting PID control and high-frequency inverter technology

To solve the problem of low control accuracy and low stability of current X-ray machines, a kind of digital power supply for X-ray machine is introduced. In the digital power supply, some key technologies are used to improve the output stability of the high frequency inverter, including improved BUCK circuit for voltage regulating circuit, high frequency inverter and soft switching technology for the high-voltage generator. The PWM control technology is used to control the switch transistor of voltage regulating circuit and inverter circuit, which makes the drive waveform output stable and easy to control. In order to improve the control accuracy, reduce the volume and change high voltage consecutively, the software PID of the microcomputer is used to control the feedback circuit. The high-accuracy power chip is used for the filament power supply to make the filament electric current stable. Through the analysis of the circuit, the parameters of the circuit are calculated and the circuit is simulated by PSPICE software. The results show that the theoretical analysis is consistent with the practical simulation results. The design can meet the requirement of the technology indices of the power supply of the X-ray machines.     

Study on constant current control of inductive power transfer with parameter identification

Aiminy at magnetic exciting current (resonant current) control, a constant current control method based on dynamic parameter identification is put forward. With energy conversion analysis, the energy storage, supply and dissipation functions of the system resonant network are constructed. The reflecting impedance identification functions are obtained by constructing the energy equilibrium relations in a period and among several periods. Furthermore, a constant current control strategy by regulating the system input voltage with Buck converter is presented. Combining the relations among system input voltage, the envelope of resonant current and the input of Buck converter, the constant current control law is proposed. The control law is verified with experiments. For the proposed method, in parameter identification, only the data of zero crossing point of resonant voltage and current are required, which reduces the complexity and costs of sampling system. Also, the constant current control law does not need complex computation and is easy to implement.     

Distributed Power Flow Method Based on Ward Equivalent

With interconnecting and developing of power system, the problem of power flow computation on dispersed data resource need to be solved. A new distributed computation method of power flow based on Ward equivalent is presented. According to master-slaver splitting principle, multi-area interconnected power system is divided into master-slaver areas. Boundary buses in different areas are defined as different bus-types. Neighborhood areas are equivalent by Ward equivalent principle, and the equivalent injection power and equivalent impedance are worked out. Power flows from master area to slaver areas are solved by Newton method, and the equivalent injection power and equivalent impedance on the boundary are modified by their solutions. The process above repeats until to convergence. The proposed distributed power flow method takes full advantage of the information of power, voltage, network configuration in neighborhood areas, so it is better on convergence and quality of solution. The proposed algorithm is testified by IEEE 14-bus system and a practical 181-bus system.     

A Control Algorithm to Regulate the Active and Reactive Power and Simulation Research of Dual-frequency Dual-Buck Inverter

This paper deduceS the control algorithm ,which can both regulate the active and reactive power of the novel dual-frequency dual-Buck inverter, and the control function. The control function based on one cycle control can control the AC-side active and reactive power by simple circuit. The simulation is given and the results prove the validity of the theory analysis. This inverter is valuable for the research of grid-connected inverters.     

小型轮式机械铲的设计与样机制造

介绍一种小型轮式机械铲的主要性能和结构,该设备可将留在粮仓地坪上(5～10 cm厚度)或墙根拐角处的粮食聚拢成堆,由扒谷机等出粮机械等进行出仓作业,也可将粮食直接推向卸粮口.更换铲板后,还可对晒场上的粮食进行翻晒作业.设备单人操作,轻便灵活,所需行走及推粮动力均由蓄电池提供,可用作为粮食出仓辅助设备.     

Voltage Fluctuation and Flicker Mitigation Using STATCOM

Voltage fluctuation and flicker is one of the main causation that imperils reliability of power supply. Steelmaking EAF with large load of distribution network produces large impact and interference on the public electric network in operation. So it is very important to control reactive power for voltage fluctuation and flicker mitigation. STATCOM possessing high response speed is an effective measure to mitigate voltage fluctuation and flicker of distribution network. Here, comparing to static var compensation, many advantages of STATCOM are analyzed. Operation principles COM mitigating voltage fluctuation and flicker, general control strategies and control method are introduced cussed. The researching pivot and trend in the future are also discussed. of STAT- and discussed. The researching pivot and trend in the future are also discussed.