Lipid-rich bovine serum albumin improves the viability and hatching ability of porcine blastocysts produced in vitro

The effects of lipid-rich bovine serum albumin (LR-BSA) on the development of porcine blastocysts produced in vitro were examined. Addition of 0.5 to 5 mg/ml LR-BSA to porcine blastocyst medium (PBM) from Day 5 (Day 0 = in vitro fertilization) significantly increased the hatching rates of blastocysts on Day 7 and the total cell numbers in Day-7 blastocysts. When Day-5 blastocysts were cultured with PBM alone, PBM containing LR-BSA, recombinant human serum albumin or fatty acid-free BSA, addition of LR-BSA significantly enhanced hatching rates and the cell number in blastocysts that survived compared with other treatments. The diameter, ATP content and numbers of both inner cell mass and total cells in Day-6 and Day-7 blastocysts cultured with PBM containing LR-BSA were significantly higher than in blastocysts cultured with PBM alone, whereas LR-BSA had no effect on mitochondrial membrane potential. The mRNA levels of enzymes involved in fatty acid metabolism and β-oxidation (ACSL1, ACSL3, CPT1, CPT2 and KAT) in Day-7 blastocysts were significantly upregulated by the addition of LR-BSA. The results indicated that LR-BSA enhanced hatching ability and quality of porcine blastocysts produced in vitro, as determined by ATP content, blastocyst diameter and expression levels of the specific genes, suggesting that the stimulatory effects of LR-BSA arise from lipids bound to albumin.     

Effects of Different Substrate Composition on Growth of Gesneriaceae Plants

The cultivation experiment was carried out to investigate the effects of different proportions of peat soil, perlite, vermiculite and yellow mud on growth of Gesneriaceae species(Chirita gueilinensis, Sinningia speciosa, Lysionotus pauciflorus, Hemiboea henryi, Aeschynanthus acuminatus, Saintpaulia ionantha). The growth traits of each plant growing in 7 different matrix materials were investigated.The plant height, crown width and chlorophyll content of each plant were measured. The results showed that the best substrate ratio was peat soil∶vermiculite=2∶1for C. gueilinensis, L. pauciflorus and H. henryi; peat soil∶perlite∶vermiculite = 2∶1∶1for S. ionantha; peat soil∶vermiculite∶yellow mud=2∶1∶1 for S. speciosa; peat soil∶perlite∶vermiculite∶yellow mud=2∶1∶1∶1 for A. acuminatus.     

A calibration method of detecting soil water content based on the information-sharing in wireless sensor network

In agricultural production, there is contradiction between the cost and accuracy of detection during the course of acquiring soil water content (θ) online. This conflict is one of the core issues of automatic water-saving irrigation technology in agriculture. At the same time, capacitive soil moisture sensor (CSMS) has received considerable attention, for it can acquire θ with low cost and high precision, and meet the application requirements of wireless sensor network (WSN). But CSMS is vulnerable to the soil temperature (T_s) and salinity (S_s) in the measurement process. Therefore, this study took EC-5 sensor for example to establish water detection calibration models of soil temperature and salinity for single sensor, using Least Squares Support Vector Machines on MatLAB (LS-SVMlab) as the tool. On this basis, we explored the spatial variability of T_s and S_s, and then a method, which could be used to calibrate the output signals of sensors in multi-point network, was proposed based on the information-sharing (T_s or S_s) technology of WSN. Through laboratory experiment, we effectively reduced the impact of soil temperature and salinity on the single sensor. In example analysis, we investigated the detection precision and costs under different information-sharing radiuses (r). And the results indicated that the method we proposed based on the information-sharing technology of WSN could successfully calibrate the influence of soil temperature and salinity on sensors in multi-point network, and it was an efficacious approach to determine the balance between the calibration accuracy of moisture sensor and the investment of agricultural production. For example, while the calibration precision of soil temperature and salinity is respectively 1%, the costs can be reduced by 30%.     

Physiological processes associated with salinity tolerance in an alfalfa half‐sib family

We previously reported an alfalfa half‐sib family, HS‐B, with improved salt tolerance, compared to parental plants, P‐B. In this study, we conducted additional experiments to address potential physiological mechanisms that may contribute to salt tolerance in HS‐B. Vegetatively propagated HS‐B and P‐B plants were treated with a nutrient solution (control) or a nutrient solution containing NaCl (EC = 12 dS/m). Shoots and roots were harvested at various time points after treatment for quantification of proline, soluble sugar, and H₂O₂ using spectrophotometers. Subcellular localization and quantification of Na in roots were conducted using a Na⁺‐specific dye under a confocal microscope. HS‐B produced 86 and 89% greater shoot and root dry biomass, respectively, compared to parental plants, P‐B, under salinity in the greenhouse. Under saline conditions the HS‐B shoots accumulated 115% and roots 55% more soluble sugars than P‐B counterparts. The non‐saline HS‐B shoots, however, showed 72% less soluble sugars than the non‐saline P‐B plants. Under saline conditions HS‐B accumulated 39% less proline in shoots, while roots accumulated 56% more proline, compared to their P‐B parents. HS‐B plants also showed a greater reduction of stomatal conductance under mild saline stress. HS‐B shoots and roots contained 3–4 times less reactive oxygen species (H₂O₂) after salt treatment compared to P‐B plants. Sodium localization and distribution analysis using Na⁺‐specific dye revealed HS‐B plants accumulated 88% and 48% less Na⁺ in stele and xylem vessels compared to P‐B. The study provides insights into the potential mechanisms that may contribute to salt tolerance in HS‐B: maintaining RWC by accumulating soluble sugars while reducing transpiration, maintaining healthy status by reducing oxidative stresses, and preventing salt toxicity by reducing accumulation of Na⁺ inside root cells and xylem.     

苦瓜对白粉病的抗性与相关生理生化指标的关系

为探讨苦瓜抗白粉病的生理生化机制,以对白粉病不同抗性的4个苦瓜品系为材料,研究苗期感染白粉病菌后,苦瓜叶片生理生化指标的变化。结果表明:接种后,叶绿素和可溶性蛋白质量分数均呈先上升后降低的趋势;可溶性糖质量分数呈下降-上升-下降-上升的趋势;抗病品系的可溶性糖、叶绿素质量分数和过氧化物酶(POD)、多酚氧化酶(PPO)活性均高于或显著高于感病品系和高感品系;抗病品系的抗坏血酸(AsA)质量分数的上升和下降的幅度均小于感病品系和高感品系;接种后10~20d,抗坏血酸过氧化物酶(APX)活性表现为抗病品系感病品系高感品系。叶绿素、可溶性糖质量分数和POD、PPO活性与病情指数呈显著或极显著负相关。综上说明,白粉病菌侵染苦瓜后,抗病品系可通过保持较高的叶绿素质量分数,增加可溶性糖、可溶性蛋白、AsA质量分数及增强POD、PPO、APX活性来提高抗病性。叶绿素、可溶性糖质量分数和POD、PPO活性均可作为苦瓜对白粉病抗性早期鉴定的指标。     

新疆甜菜丸粒化单粒种高密高产高糖栽培模式

在新疆适宜种植甜菜的生态区,通过选择甜菜丸粒化单粒种,在高密度种植条件下,依据不同栽培管理阶段特点采用合理的管理措施,以实现甜菜单产97.5～105.0t/hm2、含糖率15%以上的目标,从而构建甜菜丸粒化单粒种高密高产高糖栽培模式。     

Genotypic Variation for Tolerance to Transient Drought During the Reproductive Phase of Brassica rapa

Brassica rapa L. is a genetically diverse parent species of the allotetraploid species, oilseed rape (B. napus) and a potential source of drought tolerance for B. napus. We examined the effect of a 13‐day drought stress period during the early reproductive phase, relative to a well‐watered (WW) control, on subsequent growth and development in nine accessions of B. rapa and one accession of Brassica juncea selected for their wide morphological and genetic diversity. We measured leaf water potential, stomatal conductance, water use, and leaf and bud temperatures during the stress period and aboveground dry weight of total biomass at maturity. Dry weight of seeds and reproductive tissue were not useful measures of drought tolerance due to self‐incompatibility in B. rapa. The relative total biomass (used as the measure of drought tolerance in this study) of the 10 accessions exposed to drought stress ranged from 47 % to 117 % of the WW treatment and was negatively correlated with leaf‐to‐air and bud‐to‐air temperature difference when averaged across the 13‐day stress period. Two wild‐type (B. rapa ssp. sylvestris) accessions had higher relative total and non‐reproductive biomass at maturity and cooler leaves and buds than other types. We conclude that considerable genotypic variation for drought tolerance exists in B. rapa and cooler leaves and buds during a transient drought stress in the early reproductive phase may be a useful screening tool for drought tolerance.     

滇油杉林下死可燃物含水率与温湿度关系模型研究

[目的]研究滇油杉林下死可燃物含水率与温湿度关系模型.[方法]以滇油杉林下三类死可燃物为研究对象,借助于恒温恒湿箱对不同温湿度组合下的含水率进行测定,并研究三类死可燃物含水率与温度、湿度、温温度的关系.[结果]在相同湿度条件下,死可燃物含水率随温度的升高而降低,但在不同的湿度下具有不同的变化规律;在相同温度条件下,死可燃物含水率随相对湿度的增大而增大,但在不同的温度下具有不同的变化规律;温湿度共同作用影响死可燃物的含水率,且不同的死可燃物有不同变化规律.[结论]可燃物含水率是受多种因素影响.滇油杉林下三类死可燃物含水率从小到大依次为粗大死可燃物、腐殖质、细小死可燃物.     

Influence of salinity and moisture on the threshold shear velocity of saline sand in the Qarhan Desert,Qaidam Basin of China: A wind tunnel experiment

Determination of the threshold shear velocity is essential for predicting sand transport, dust release and desertification. In this study, a wind tunnel experiment was conducted to evaluate the influence of salinity and moisture on the threshold shear velocity of saline sand. Saline sand samples (mean particle size of 164.50-186.08 μm and the total silt, clay and salt content of 0.80%-8.25%) were collected from three saline sand dunes (one barchan dune and two linear dunes) in the Qarhan Desert, Qaidam Basin of China. Original saline sand samples were placed in two experimental trays for wet and dry processing to simulate deliquescence and desiccation, respectively. Surface moisture content ranging from 0.30% to 1.90% was generated by the steam method so that the saline sand can absorb water in a saturated water vapor environment. The motion of sand particles was determined by the observers with a solid laser. The laser sheet (0.80 cm thick), which was emitted by the solid laser, horizontally covered the sand surface and was bound to the sand. Results show that the cohesion of saline sand results from a combination of salt and water. The threshold shear velocity increases exponentially with the increase in crust thickness for the linear sand dunes. There is a positive linear correlation between the original moisture content and relative threshold shear velocity. The threshold shear velocity of dewatered sand is greater than that of wet sand with the same original moisture content. Our results will provide valuable information about the sand transport of highly saline soil in the desert.     

Time‐lapse monitoring of soil water content using electromagnetic conductivity imaging

The volumetric soil water content (θ) is fundamental to agriculture because its spatiotemporal variation in soil affects the growth of plants. Unfortunately, the universally accepted thermogravimetric method for estimating volumetric soil water content is very labour intensive and time‐consuming for use in field‐scale monitoring. Electromagnetic (EM) induction instruments have proven to be useful in mapping the spatiotemporal variation of θ. However, depth‐specific variation in θ, which is important for irrigation management, has been little explored. The objective of this study was to develop a relationship between θ and estimates of true electrical conductivity (σ) and to use this relationship to develop time‐lapse images of soil θ beneath a centre‐pivot irrigated alfalfa (Medicago sativa L.) crop in San Jacinto, California, USA. We first measured the bulk apparent electrical conductivity (EC_a – mS/m) using a DUALEM‐421 over a period of 12 days after an irrigation event (i.e. days 1, 2, 3, 4, 6, 8 and 12). We used EM4Soil to generate EM conductivity images (EMCIs). We used a physical model to estimate θ from σ, accounting for soil tortuosity and pore water salinity, with a cross‐validation RMSE of 0.04 cm³/cm³. Testing the scenario where no soil information is available, we used a three‐parameter exponential model to relate θ to σ and then to map θ along the transect on different days. The results allowed us to monitor the spatiotemporal variations of θ across the surveyed area, over the 12‐day period. In this regard, we were able to map the soil close to field capacity (0.27 cm³/cm³) and approaching permanent wilting point (0.03 cm³/cm³). The time‐lapse θ monitoring approach, developed using EMCI, has implications for soil and water use and management and will potentially allow farmers and consultants to identify inefficiencies in water application rates and use. It can also be used as a research tool to potentially assist precision irrigation practices and to test the efficacy of different methods of irrigation in terms of water delivery and efficiency in water use in near real time.